teambagboy1 Posted May 10, 2012 Report Share Posted May 10, 2012 i got my dd-1 today and i put the cd in to test the hu i clip right away at 0db track 1 and the dd-1 dont pick up signal so i turn to track 3 -5db and i am picking up signal and no clipping at vol 37 out of 40 now my question is do i set my bass and treble on my hu at -5 Quote Link to comment Share on other sites More sharing options...
R3nOSlaPP Posted May 10, 2012 Report Share Posted May 10, 2012 i think everything should be flat treble bass loudness all of that basically just like resetting the deck Quote Vehicle: 2017 Chevrolet Silverado High Country Electrical: 320A Singer Alt, (2) Limitless Lithium 15ah, Full Throttle FT680-48 Speakers: Stevens Audio SA 6 (ACTIVE), Audio Designs 3” Subwoofer: (4) B2 Audio XM 8’s Amplifiers: (2) B2 Audio Rage 2500.1, (1) B2 Audio Rage 1200.6 Processors: NavTv M650 (integration), Helix DSP Pro MK2 Silverado Build Log Link to comment Share on other sites More sharing options...
teambagboy1 Posted May 10, 2012 Author Report Share Posted May 10, 2012 yea i know you got to test it all on flat but when going to retune the hu do i got to -5 bass and treble Quote Link to comment Share on other sites More sharing options...
teambagboy1 Posted May 10, 2012 Author Report Share Posted May 10, 2012 maybe its not a noob question if no one know ?? Quote Link to comment Share on other sites More sharing options...
OrionStang Posted May 10, 2012 Report Share Posted May 10, 2012 (edited) Flat means '0', not -5. What HU do you have. Edited May 10, 2012 by OrionStang Quote SMD Super Seller My Feedback Thread Link to comment Share on other sites More sharing options...
teambagboy1 Posted May 10, 2012 Author Report Share Posted May 10, 2012 (edited) Flat means '0', not -5. What HU do you have. ok so when i got to retune my radio do i set the bass on the radio to -5 or to whatever i want it to be Edited May 10, 2012 by teambagboy1 Quote Link to comment Share on other sites More sharing options...
Kranny Posted May 10, 2012 Report Share Posted May 10, 2012 i think what we should ask is, why do you need to have bass and treble at -5 on the headunit? Quote Link to comment Share on other sites More sharing options...
OrionStang Posted May 10, 2012 Report Share Posted May 10, 2012 set everything on the HU to zero. Use the 0db 1khz track to tune with the dd-1. Quote SMD Super Seller My Feedback Thread Link to comment Share on other sites More sharing options...
Mario928 Posted May 10, 2012 Report Share Posted May 10, 2012 Did you read the instructions? Sound to me that you haven't open the book and have the time to read the info. smh Quote Build Under Construction Head Unit = Kenwood DDX514 Amps = Kicker 750.1, Going to install Sundown 1500D v3 and Sundown 125.4 Battery = XS D3400 Wires = Kicker RCA's, 0 Gauge street wire and Stinger Mids and Highs = Stock Sub= Kicker L7 12" Alternator = 220 Mechman Sound Deadner= Fatmat and Stinger Road Kill Link to comment Share on other sites More sharing options...
teambagboy1 Posted May 10, 2012 Author Report Share Posted May 10, 2012 maybe im saying it wrong when i put the cd in and hook the dd1 up i then i set everything to 0 and flat hit track 2 that is 1khz i get the clipping light and the signal light dint even come on yet then i change track to 0-5 i get the signal light and clips at 37 now my question is do i set my bass and treble to -5 to match the cd and yes i did read the book im looking at it now Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.