Kris4b11 Posted May 13, 2012 Report Share Posted May 13, 2012 Whats going on guys I just got a Orion hcca 102 {10" dual 2 ohm) I got it sitting in my old box that I made for my alphasonik 800 series which is about 2ft^3 just so I could use it now, my question is how many cubes would you guys recommend going with? Its going in my 08 lancer and is a daily driver. I tried searching this forum and google but came up with nothing. I felt orions spec was to small cuz its calling for half the size it has now and I feel like its too small as is right now. Also how wide should my slot port be? Its a 2" wide tuned to 35-36hz right now... Thanks for the help guys Quote Factory double din navi unit with 30gb internal Crescendo bc3500 DD 9512i Link to comment Share on other sites More sharing options...
Audio Customs Posted May 13, 2012 Report Share Posted May 13, 2012 hey dude here some specs of the HCCA 10.2 SPECIFICATIONS Directed Part Number 27302 Model Number 10.2 Thiele/Small Parameters Fs (free-air resonance, Hz) 30.78 Vas (equivalent compliance, cu. ft. 0.564 Vas (equivalent compliance, liters) 15.98 Qms (Q, mechanical) 3.63 Qes (Q, electrical) 0.42 Qts (total driver Q) 0.38 Re (DC resistance, ohms) 3.93 Z (nominal impedance, ohms) 2 x 2 Le (inductance, mh) 1.93 Efficiency (1W @ 1M, dB) 83 Xmax (one way linear excursion, in.) 1.0 Xmax (one way linear excursion, mm) 25 Pe (continuous power handling, watts) 1500 Peak power handling (music, watts)** 3000 Mms (total moving mass, grams) 261.93 Cms (mechanical compliance, mm/N) 0.102 Bl (motor strength, Tesla-M) 21.81 Sd (effective radiating area, sq. cm.) 333.3 Sd (effective radiating area, sq. m.) 0.03333 Sd (effective radiating area, sq. in.) 51.6616 Frequency range (Hz) 31-250 Energy Bandwidth Product (EBP) 74 Driver Physical Dimension Speaker Displacement (cu ft.) 0.1268 Mounting hole diameter (mm) 238 Mounting hole diameter (inches) 9.37 Mounting depth (mm) 214 Mounting depth (inches) 8.425 Magnet Weight (Oz) 263.7 Basket diameter (inches) Recommended Enclosures Typical sealed enclosure (cu. ft.) 0.5 to 0.8 Vented enclosure (cu. ft.) 1.2 Port tuning frequency (Hz) 38 Port diameter (inside, in.) 3.4 Equivalent square port (in.) 3x3 Port length (in.) 12 Enclosure Details 1. Parameters listed are for conventional applications only, for further help please call Tech Audio Support 2. 1" MDF is recommended. 3. Recommended enclosures are NET Box Volumes, speaker and port displacement are calculated into the volume of the enclosure, you will not need to add these volumes to calculate GROSS volume for the enclosure. *** Sub-sonic filters should always be used and adjusted specifically for vented box designs. NOTE: The woofer must face up or down only, especially in sealed enclosures. Specifications subject to change without notice © 2007 Directed Electronics, Inc. Vista, CA 92081 All rights reserved. 24 Quote cone area http://www.stevemeadedesigns.com/board/topic/6819-cone-area-of-a-subwoofer/ 4th order band pass basic http://www.stevemeadedesigns.com/board/topic/126478-basics-of-a-4th-order-bandpass-enclosure/ this is Torres box calculator My GUI Box Tuning Calculator Download - Updated 8/18/2012 Link to comment Share on other sites More sharing options...
nCOMP1337 Posted May 14, 2012 Report Share Posted May 14, 2012 Orions are made sort of weird unless its just me, i have a 15.4 hcca, i thought it was weird that according to the manual they suggest a sealed enclosure to be larger then the ported one. now every other sub ive seen its always been the other way around, ported enclosure requires more space. unless its a large typo the company never fixed, any idea why this particular sub is like that. also here is the 2012 specs according to the orion manual, they are different the the ones the other guy posted and again it shows the sub requiring more space for a sealed than a ported enclosure Quote Link to comment Share on other sites More sharing options...
Audio Customs Posted May 14, 2012 Report Share Posted May 14, 2012 yeah its weird its like that sealed is larger Quote cone area http://www.stevemeadedesigns.com/board/topic/6819-cone-area-of-a-subwoofer/ 4th order band pass basic http://www.stevemeadedesigns.com/board/topic/126478-basics-of-a-4th-order-bandpass-enclosure/ this is Torres box calculator My GUI Box Tuning Calculator Download - Updated 8/18/2012 Link to comment Share on other sites More sharing options...
Kris4b11 Posted May 16, 2012 Author Report Share Posted May 16, 2012 I have the same specs as kynto but thought it was weird and maybe the hcca would be like the L7 where they hit harder with more space. My friend and I built a box for his hcca 15 at about 4.9ft^3 and that thing hits pretty hard, just that 1 broke the trunk hatch of his pathfinder and the license plate ripped like a sheet of paper... I might experiment with this and see if I stuff the box if it will hit harder.I really appreciate your help guys I really didnt think anyone would reply with this funny sub situation Quote Factory double din navi unit with 30gb internal Crescendo bc3500 DD 9512i Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.