Jump to content

Ford Expediton SLOOOW Build updated 02/28


Recommended Posts

that box is pretty sick too... lol yano I never thought to run the speaker wires using a bolt ran through the box like that that's cool... granted I've also usually only ran 16gauge wires to my subs cuz the subs I've always had were stuff that didn't have terminals to fit more than one 8 gauge in it at a time and I was having to wire 4 ohm subs to 1 ohm so I had to fit 2 and sometimes 3 wires in one coil terminal

Thanks I was pretty excited about the alt myself. kind of like a school girl, in a dress, on a swing. lol

It's warming up enough that the donut-punching cyclist douchenozzles are getting their two wheeled fagmobiles out.

My Build Log

Link to comment
Share on other sites

  • 3 weeks later...
  • Replies 74
  • Created
  • Last Reply

I used a connector i cut down so they fit in the terminal. Saw somone else on here do that and it worked good.

that box is pretty sick too... lol yano I never thought to run the speaker wires using a bolt ran through the box like that that's cool... granted I've also usually only ran 16gauge wires to my subs cuz the subs I've always had were stuff that didn't have terminals to fit more than one 8 gauge in it at a time and I was having to wire 4 ohm subs to 1 ohm so I had to fit 2 and sometimes 3 wires in one coil terminal

New build coming........

YouTube:http://www.youtube.c...6?feature=guide


Old Build Log: http://www.stevemead...d-on-the-cheap/

Old Screen name: Redrebel66

Link to comment
Share on other sites

Ok so I threw the budget out the window and decided to spend what little extra I can on this build because you can never have to much.

So updates:

Then i made a battery bracket for my kinetic since it was just sitting there since i put it in. A buddy had an old meat saw laying around and he gave me the deck off of it that was made of stainless. That shit is a pain to cut with an angle grinder and cutting wheels. So I put some rubber belting between the battery and the strap and I am going to use the vertical part to mount multiple fuse holders when i run more wire.

batterystrapped_zps028a5dfa.jpg

batterystrapfuse_zps7561e0d5.jpg

New build coming........

YouTube:http://www.youtube.c...6?feature=guide


Old Build Log: http://www.stevemead...d-on-the-cheap/

Old Screen name: Redrebel66

Link to comment
Share on other sites

Thanks I was pretty excited about the alt myself. kind of like a school girl, in a dress, on a swing. lol

lmao

Thanks I was pretty excited about the alt myself. kind of like a school girl, in a dress, on a swing. lol

It's warming up enough that the donut-punching cyclist douchenozzles are getting their two wheeled fagmobiles out.

My Build Log

Link to comment
Share on other sites

Got a VM-1 and glassed it into the spot in my overhead console where the compass was. First time with fiberglass and filler. It came out ok for my first project. I just plasti dipped it.

null_zpsd1a99992.jpg

null_zpsad5f3103.jpg

null_zps86232169.jpg

null_zps8c9840cd.jpg

null_zps06ed7c3a.jpg

null_zpsa2280a9b.jpg

null_zps0fddfeee.jpg

null_zpse51e51aa.jpg

null_zps43b02e56.jpg

New build coming........

YouTube:http://www.youtube.c...6?feature=guide


Old Build Log: http://www.stevemead...d-on-the-cheap/

Old Screen name: Redrebel66

Link to comment
Share on other sites

  • 2 weeks later...
  • 2 weeks later...

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 237 Guests (See full list)

    • There are no registered users currently online



×
×
  • Create New...