nw1234567 Posted July 4, 2012 Report Share Posted July 4, 2012 (edited) Finally started my build!!! I am starting out by putting two Power Acoustik Mofo 154X subs in my charger. I'll Be hooking them up to a BAMF 5500.1D amp. I'll tryto post pics as i go but i don't have many yet. (btw i know that power acoustik is crap but i'm 17 and a little limited on $$) got my power and ground done it's to easy to run wires in my trunk... didn't take any pics while i was building my box... here's a quick test fit before i put on the outer baffle which will also serve as a foot/stand and hold it parrallel attaching the outer baffle didn't have the money for the integration kit and a new headunit so I decided to go with an LOC... got a good one from my boss for pretty cheap. here it is along with my amp turn on wire and switch just another pic of the switch I'll try to get more pics as i continue my build and update as i get them. Edited July 4, 2012 by nw1234567 Quote Link to comment Share on other sites More sharing options...
TylerParrish Posted July 4, 2012 Report Share Posted July 4, 2012 (edited) last 3 pics are all exactly the same >_> Nevermind: Fixed... Edited July 4, 2012 by TylerParrish Quote What the f**k is an appropriate signature supposed to look like?2013 Kia Forte Koup Pioneer AVH-X4600BT iDMax 12 DD M1c @ 2 ohms Rockford Prime 200.2 Pioneer 6.75" Comp Set XS S3400, D2700 Project DB Battery Terminals Axxess ASWC Stinger HPM Everywhereeee 90 Sq. Ft. of Stinger Roadkill Stock Alt Stuff To Come Sundown X-12 New Amp New Comps 4 Channel Amp My Current Build: http://www.stevemeadedesigns.com/board/topic/167462-13-kia-forte-koup-dd-setup/ My Old Build: http://www.stevemead..._+2000 +mustang Avatar Courtesy of SnowDrifter Link to comment Share on other sites More sharing options...
audiofanaticz Posted July 4, 2012 Report Share Posted July 4, 2012 (edited) so thats what a stock trunk looks like. LolL looking forward to seeing more pics, seems like everyones building a charger up right now.. AudioTistics just did, I currently am, now you! good luck Edited July 4, 2012 by Audiofanaticz Quote Link to comment Share on other sites More sharing options...
nw1234567 Posted July 18, 2012 Author Report Share Posted July 18, 2012 Finally adding some more pics. Got the subs in and playing and they slam pretty hard:). Just have some asthetic stuff left to do and then my bass will be done! Finishing off the box: Measuring up the holes holes measured up cutting the holes out the old fashioned way 1st hole cut both cut laying up the vinyl for the front of the box vynil glued on and cut to size Running some wires: the old zip tie trick Finding an ignition fuse to hook up a fuse adapter to for the remote wire LOC all wired up (its just stuck up there temporarilly at this point Remote wire hooked up and ran Quote Link to comment Share on other sites More sharing options...
nw1234567 Posted July 18, 2012 Author Report Share Posted July 18, 2012 wiring subs into box: crammin the "recommended" 8awg wire into one of the subs the ultimate way to mark the neg speaker wire one sub in and wired both subs wired up in parallel down to 1 ohm... speaker wire run out of box and siliconed up finishing putting subs in the box: screwing them in... spray painted the back of the box just so no wood shows when i put the amp on and make a face plate Made a cut in the trunk carpet so i can fold it up and still access the batt and spare with the box in Time for some sound dampenning mat: I did the side pannels of the trunk and the trunk lid too but forgot to get pics... And finally... I'll post a vid at some point (if anybody wants to see a specific song just leave it in the comments) and i'll post more pics after i make face pannels etc. Quote Link to comment Share on other sites More sharing options...
Crandis16 Posted July 18, 2012 Report Share Posted July 18, 2012 looks really clean man. did you use a heat gun with the vinyl wrap or just glue? I want to do the face of my box in a vinyl material too possibly Quote My Red zx2 Build Log My Black zx2 Build Log My Red zx2 UBL Link to comment Share on other sites More sharing options...
nw1234567 Posted July 18, 2012 Author Report Share Posted July 18, 2012 I use a glue/paint sprayer hooked up to an air compressor with some contact adhesive. just made some overlay on the vinyl and sprayed both sides then carfully pressed down the vinyl. Quote Link to comment Share on other sites More sharing options...
SnowDrifter Posted July 18, 2012 Report Share Posted July 18, 2012 Nice! Those subs LOVE the low end Quote ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444 Link to comment Share on other sites More sharing options...
IBleedMusick Posted July 18, 2012 Report Share Posted July 18, 2012 Looks pretty good how about some pics of the car itself. Quote 2013 Dodge Charger Build Log 1996 Ford Explorer XLT 5.0Build Log 2005 Honda Civic LX Coupe Build Log SMD SUPER SELLER!!!!My Selling Feedback Link to comment Share on other sites More sharing options...
SnowDrifter Posted July 18, 2012 Report Share Posted July 18, 2012 Oh, and don't sweat the subs or anything. We care about the pride you take in your work, not the brands you use Quote ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444 Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.