Joshex Posted December 18, 2012 Report Share Posted December 18, 2012 I'm getting ready to throw on some Blox coilovers along with a Spyder camber kit. Nothing too fancy just want a little lower look for my DD. 95 Acura Integra - 5-speedNFG Pioneer FH-X700BT(2) Rockford Fosgate 12" P3AQ1200dRockford Fosgate P1652-S 6.5" components Rockford Fosgate P1572 5x7"Rockford Fosgate R400.4 95 Integra Build Here93 EJ2 Build Here Link to comment Share on other sites More sharing options...
mbdblue Posted December 18, 2012 Report Share Posted December 18, 2012 my 95 accord had Bilstein sport struts with tanabe springs...not an excessive drop cuz I wouldn't want to go too low on new england roads. AA-Atomic-Clif Designs-DC-Diamond-Digital Designs-Directed-Eclipse-Fi-Hertz-Hifonics-Kenwood-Memphis-Phoenix Gold-Pioneer-PPI-PSi-Stinger-Sundown-TC Sounds-Viper-Zapco Link to comment Share on other sites More sharing options...
B4SS H3ADD Posted December 18, 2012 Report Share Posted December 18, 2012 I got a 06 civic coupe, got a 12" sub and only have aftermarket component speakers in the front, I want to add new speakers in the back soon. any recommendation? also theres a stock 8" in the middle. should i upgrade it as well? i was thinking bout the 8" sundown neo pro but don't really know how to get my hands on one, need help Link to comment Share on other sites More sharing options...
Joshex Posted December 18, 2012 Report Share Posted December 18, 2012 I got a 06 civic coupe, got a 12" sub and only have aftermarket component speakers in the front, I want to add new speakers in the back soon. any recommendation? also theres a stock 8" in the middle. should i upgrade it as well? i was thinking bout the 8" sundown neo pro but don't really know how to get my hands on one, need help Def get a Sundown 8" of some sort, I have a couple buddies with Sundowns and powered correctly they are amazing. 95 Acura Integra - 5-speedNFG Pioneer FH-X700BT(2) Rockford Fosgate 12" P3AQ1200dRockford Fosgate P1652-S 6.5" components Rockford Fosgate P1572 5x7"Rockford Fosgate R400.4 95 Integra Build Here93 EJ2 Build Here Link to comment Share on other sites More sharing options...
ZENADRO Posted February 4, 2013 Report Share Posted February 4, 2013 I made a post earlier, and soon after was directed to come here by KyLar96, So here it is.... Im currently deployed and as soon as I get back I want to start my build, so im trying to gather as much information needed. Im lookin for a loud and clean set up and mainly going towards the rockford route. What I have planned so far. Set of Rockford Fosgate T2652-s up front. Set of Rockford PPS4-6 in the rear. (taken out of my hatchback) -Powered by Rockford t600-4. Initially was going to be a RF T2D412 but decided to switch to a Sundown Audio Z v.3 12. -Powered by RF T1500bdcp -Plan to design/build my own box and want the sub up port back towards the hatch. Plan on sound deadening the trunk/hatch, and doors. As far as electrical upgrades. Upgrading to a optima yellow top under the hood. Also doin the big three in knukonceptz 0g. As well as running it to the back. I plan on running a RFC10HB in the back. Then dropping down to 4g into the amps since they dont accept 0g. Would my stock electrical system be able to handle power or would I need another battery in the rear? Other questions I have. -Box tuning freq? I plan on 33hz. Good for the sub? I know it recommends 35hz. -Yellow top under the hood (good/bad) -Would i fuse from the cap to the amps? -16g wire fine for the speakers? -12g/10g/8g for the sub to the amp? I know I have alot of questions and hopefully you guys could help answer/give me some advice. I just want to make sure i do it right the first time. Appreciate your guy's time. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.