Jump to content

Proper electrical for 2 aq 2200's


Recommended Posts

I currently run 2 hdc3 18's dual 1 on one aq 2200. Would like to maybe in the future add another and run them at .5 each. I have a d3400 up front and a kinetik 2400 in the back...stock alt as of now. I have a few thoughts as to how to run it but just wanted some other opinions to think about.

2017 Honda Accord Touring 

Build coming soon

Link to comment
Share on other sites

Upgrade alt and add another 2400, that will be fine even at .5 ohm each, just run them strapped at 1 ohm. People saying don't run .5 ohm haven't done it or just thinking you need your hand holded. Make a decision if you are going to run below nominal, make sure you understand what you are getting into.

TEAM SOUNDQUBED -- TEAM SOUTH

TEAM S.O.B. - Founder & Captain

3x Streetbeat World Record Holder

2017 MWSPL 1st place Mayhem & 4th Xtreme 4 
2016 MWSPL 1st place Mayhem/2nd Adv 4/2nd Xtreme 4
2015 MWSPL 2nd place Mayhem & 4th Xtreme 4
2014 USACI 2nd place Streetbeat 5 - 162.6 db
2014 MWSPL 2nd place Xtreme 4 - 144.9 db
2013 USACI 1st place Streetbeat 4 - 161.9 db
2013 USACI 1st place Street Q+ - 162.8 db
2013 MWSPL 3rd Kaos2 & 4th Xtreme 4
2011 USACI 2nd place MOD 1001-2k - 160.0 db
2011 MWSPL 4th place: Adv3 - 157.8 db, Kaos2 - 150s db, Xtreme4 - 140s db
2010 ARSPL 1st place 501-750 - 160.3 db Arkansas loudest

Best score to date 164.4 db - Termlab Outlaw

Streetbeat 4 - 161.9 db

Streetbeat 5 - 162.6 db

MWSPL on Dash Legal door open (Music) - 162.5 db

Sealed on dash Legal (Music) - 161.1 db - Termlab

THE BLACK NASTY CURRENT BUILD & FAB

The Black Nasty (6) 15 Rebuild Log 2012

(4) 15 Walled Sierra Build Log

Evo X build log

Facebook page The Black Nasty

16163044_large.gif

Link to comment
Share on other sites

Not adding 2 more amps just one. One woofer on each amp at .5...Can only run dual 1 at .5 or 2 ohms per amp. Not really wanting to strap the amps unless running at 1 ohm between them is ok even though they are rated at 2 strapped. I know they can do .5 each all day from what tons of people out there say.

2017 Honda Accord Touring 

Build coming soon

Link to comment
Share on other sites

Yes 1 ohm strapped is fine with proper electrical I listed above. I have strapped my 3500d.1s at .5 ohm (.25 ohm each) for burps no problem.

TEAM SOUNDQUBED -- TEAM SOUTH

TEAM S.O.B. - Founder & Captain

3x Streetbeat World Record Holder

2017 MWSPL 1st place Mayhem & 4th Xtreme 4 
2016 MWSPL 1st place Mayhem/2nd Adv 4/2nd Xtreme 4
2015 MWSPL 2nd place Mayhem & 4th Xtreme 4
2014 USACI 2nd place Streetbeat 5 - 162.6 db
2014 MWSPL 2nd place Xtreme 4 - 144.9 db
2013 USACI 1st place Streetbeat 4 - 161.9 db
2013 USACI 1st place Street Q+ - 162.8 db
2013 MWSPL 3rd Kaos2 & 4th Xtreme 4
2011 USACI 2nd place MOD 1001-2k - 160.0 db
2011 MWSPL 4th place: Adv3 - 157.8 db, Kaos2 - 150s db, Xtreme4 - 140s db
2010 ARSPL 1st place 501-750 - 160.3 db Arkansas loudest

Best score to date 164.4 db - Termlab Outlaw

Streetbeat 4 - 161.9 db

Streetbeat 5 - 162.6 db

MWSPL on Dash Legal door open (Music) - 162.5 db

Sealed on dash Legal (Music) - 161.1 db - Termlab

THE BLACK NASTY CURRENT BUILD & FAB

The Black Nasty (6) 15 Rebuild Log 2012

(4) 15 Walled Sierra Build Log

Evo X build log

Facebook page The Black Nasty

16163044_large.gif

Link to comment
Share on other sites

I only use it as a daily, no comps. My thoughts for upgrading electrical were adding a dc270, and adding another battery. I wanted to swap the 2400 for a d3100 but i think the current draw will be too much for just one 3100. I also really dont want to add another 1/0 run. This is a solid 1000-1500 ill have to shell out just to double power. Dont know if Im willing to sink that much more in it.

2017 Honda Accord Touring 

Build coming soon

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 1008 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...