Chris Hammer Posted June 24, 2013 Report Share Posted June 24, 2013 Last, but not least, the port floor as it will look from the rear of the box. This is the part people will see when I open the hatch door to the back of the Escalade. The carbon you see on the vertical walls is just single layer at this point. Still has four layers to go on the outside of the box, so I wasn't too concerned about my brush sheddings staying in the resin. Also, I know the floor piece doesn't look 100% right, but that is because I still have one final piece to put in that will cover all of the seams. That will be one of the last things I do and it will overlap the CF that goes over the outside of the box. That's why you see seams right now, but you won't later when things are finished......so let me get this right you have FOUR LAYERS of CF on the inside and out??? Will it effect the sound quality if you only do one layer and if you use 3/4" MDF??? I realy want to do this to show off but i know this is way out of my league and my mom would not DARE let me spend as much money on this project. If you want o show off carbon fiber, dont have money and dont care about strength, get carbon vinyl wrap. Also this thread is pretty dead, like I haven't seen Captain on here in a good minute. MY BUILD *****http://tinyurl.com/gmcbuild***** Vehicles 2005 GMC Canyon CB1000r - Currently where any future funds are going. (exhasut,bazzaz, ohlins shock, screen, etc.) crf250r - Used to be race bike..now I just trail ride..practice at the track on it. CH80 - Daily beater (when nice weather)best 150$ ever spent. 100+mpg Sold to: Skullz - pstone11 - Leo1103 - Volvo 63' - pavelpardo - imnew59585 Shower farts still piss me off.I think theyre pretty neat. When the water runs down your crack as you let one out... its like shitting in a crockpot. Link to comment Share on other sites More sharing options...
95neon_thumper82 Posted June 25, 2013 Report Share Posted June 25, 2013 looks cool AF bro. mad jealous over here. good work can't wait to see a video of it bumpin! <img src=http://i1332.photobucket.com/albums/w610/beastly666bassboy/IMG_9611192581855_zps9b9b76be.jpg border=0 alt= height="75" width="800"> Growing old is necessary... growing up is an option! Have fun or you might as well fall into a 6 foot deep hole. Its much easier to be smart and act stupid then it is to be stupid and act smart! You're only limited by your imagination! Stop limiting yourself! Optima yellow top6 guage cableJVC KD S36 headunitPower acoustik 1600w 750w rms @2 ohmsTwo MTX thunder 7000 10"sSealed box @4.04 ft^3Mojo Mat in the trunk Coming soon:1/0 awg cablebig 3... in 6 gauge(till i can get the money for 0)planet audio Crossover.2- 3.5's for the front.2- 6.5's for the doors2- 6x9's for the rear3- MB Quartz amps to power it all.1- 6" aeroport...soon! <p>My Log! Link to comment Share on other sites More sharing options...
Nikitaaa Posted June 25, 2013 Report Share Posted June 25, 2013 Last I heard he was out of the game. 2007 M/T Honda Civic Coupe EX (4) Sundown Audio X-8's (2) Ampere Audio 3800.1's (3) Stinger SPV-44 Batteries (1) Mechman 240 3:1 Ratio 4th order sealed from the trunkTEAM NWSPLBest termlab scores to date in Honda trunk:151.7db legal (official) IASCA trunk 3 classBest termlab scores to date in my walled Subie:152.9db legal (unofficial) IASCA advanced 2 class155db outlaw Link to comment Share on other sites More sharing options...
ImBlackDragon Posted July 3, 2013 Report Share Posted July 3, 2013 Last, but not least, the port floor as it will look from the rear of the box. This is the part people will see when I open the hatch door to the back of the Escalade. The carbon you see on the vertical walls is just single layer at this point. Still has four layers to go on the outside of the box, so I wasn't too concerned about my brush sheddings staying in the resin. Also, I know the floor piece doesn't look 100% right, but that is because I still have one final piece to put in that will cover all of the seams. That will be one of the last things I do and it will overlap the CF that goes over the outside of the box. That's why you see seams right now, but you won't later when things are finished......so let me get this right you have FOUR LAYERS of CF on the inside and out??? Will it effect the sound quality if you only do one layer and if you use 3/4" MDF??? I realy want to do this to show off but i know this is way out of my league and my mom would not DARE let me spend as much money on this project. If you want o show off carbon fiber, dont have money and dont care about strength, get carbon vinyl wrap. Also this thread is pretty dead, like I haven't seen Captain on here in a good minute. i mean i looked up CF and alot of the Carbon Vinyl Wraps came up and its not that much cheaper that CF its just with CF u have to buy the resin witch will drive the priss up even more and i know this build is but i just saw his video on youtube like 2 weeks ago and he said the whole build was up here so i checked it out <script type="text/javascript"><!--google_ad_client = "ca-pub-9419194237374196";/* car audio */google_ad_slot = "1529947055";google_ad_width = 728;google_ad_height = 90;//--></script><script type="text/javascript"src="http://pagead2.googlesyndication.com/pagead/show_ads.js"></script> Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.