Jump to content

Is this my 1ohm load??


Recommended Posts

well here is what i am going for does it look right using bolts and washers?

2_4ohm_dvc_1ohm.gif

A2E11C68-42CC-417E-93E3-EB77AD6EEEEB-21821-000006C4C4FF91D4.jpg

2001 GMC Sierra DC Audio Build =http://www.stevemead...o-level-4-build

2001 GMC Sierra

XSPower D3400

Pioneer AVHD 1400

​MB Quart Component Sets

Pioneer 5x4s

Audiotechnix Power Wire, Speaker Wire, Sound Deadener

DC Audio Level 4 10s

DC Audio 3.5k

Rocford Fosgate R400-4

HID 6k

Slammed Truck on 20s

Candy Blue.

Link to comment
Share on other sites

no... you have to actually connect all the wires together, just like the picture. you have one + and one - on each speaker that isnt connected. the speaker wont even play like that.

If I answered you in a well mannered, informative way, you asked a good question or had a good attitude. If I was an asshole, you asked a stupid question or you had a fucktard attitude... or I was in a bad mood.

Team BassickHU: Pioneer AVIC Z110Front: Peerless SLS 6.5", Peerless HDS 4", Rainbow tweeter - running activeAmp: JL HD600/4 and DC 4 channel (bridged to midbass)Processor: JBL MS-8Subs: 2x 12" AA MayhemsAmp: DC 3kElectrical: DC power 270xp alt. 1/0 big 4. XSpower D3400 and six D680s.

http://www.stevemeadedesigns.com/board/topic/121795-29-update-the-buick-is-getting-a-rebuild/

Top career scores: DBdrag 151.7 MECA SQ 82.25My SOTM build

Yeah. im pretty sure they dont warranty retarded people.

Link to comment
Share on other sites

You only need two bolts. RUn all the positives to one bolt and all the negatives to the other and your done.

MY BUILD *****http://tinyurl.com/gmcbuild*****

Vehicles

2005 GMC Canyon

CB1000r - Currently where any future funds are going. (exhasut,bazzaz, ohlins shock, screen, etc.)

crf250r - Used to be race bike..now I just trail ride..practice at the track on it.

CH80 - Daily beater (when nice weather)best 150$ ever spent. 100+mpg

Sold to:

Skullz - pstone11 - Leo1103 - Volvo 63' - pavelpardo - imnew59585

Shower farts still piss me off.

I think theyre pretty neat. When the water runs down your crack as you let one out... its like shitting in a crockpot.
Link to comment
Share on other sites

with dual 4ohms...and 2 woofers...all positive and all negative connected....will equal 1 ohm load....

https://photos.google.com/photo/AF1QipP7rjav9cD9UFdAYBJmz4M4LoNlF26ng1xhAf4Uhttps://photos.google.com/photo/AF1QipP7rjav9cD9UFdAYBJmz4M4LoNlF26ng1xhAf4U

2013 DODGE CHALLENGER R/T

SUNDOWN ZV4-18

CRESCENDO 3.5K

PIONEER AVIC 5300 NEX

ALPINE TYPE R 6.5S & 6X9'S

ROCKFORD FOSGATE 1.5" TWEETS

5 C&D TECH BATTS

Link to comment
Share on other sites

i am trying to make it so my 10 gauge wire will fit so i dont have to run a bunch of wires into one terminal on the speaker..

2001 GMC Sierra DC Audio Build =http://www.stevemead...o-level-4-build

2001 GMC Sierra

XSPower D3400

Pioneer AVHD 1400

​MB Quart Component Sets

Pioneer 5x4s

Audiotechnix Power Wire, Speaker Wire, Sound Deadener

DC Audio Level 4 10s

DC Audio 3.5k

Rocford Fosgate R400-4

HID 6k

Slammed Truck on 20s

Candy Blue.

Link to comment
Share on other sites

Dont. You run all positives on both speakers to on BOLT on your box. Than all negatives to one BOLT. than bolts to amp. Simple. You are making it harder. You only need one wire form each push terminal on the subs. Act like the single positive sign and negative sign in the12volt diagram is the bolt not amp.

I drew a shitty diagram in paint...dont know how to show it any easier...looks like crap but maybe it can get the point across. Uploading now.

Edited by Chris Hammer

MY BUILD *****http://tinyurl.com/gmcbuild*****

Vehicles

2005 GMC Canyon

CB1000r - Currently where any future funds are going. (exhasut,bazzaz, ohlins shock, screen, etc.)

crf250r - Used to be race bike..now I just trail ride..practice at the track on it.

CH80 - Daily beater (when nice weather)best 150$ ever spent. 100+mpg

Sold to:

Skullz - pstone11 - Leo1103 - Volvo 63' - pavelpardo - imnew59585

Shower farts still piss me off.

I think theyre pretty neat. When the water runs down your crack as you let one out... its like shitting in a crockpot.
Link to comment
Share on other sites

i see what i did wrong i will try again after work lol

2001 GMC Sierra DC Audio Build =http://www.stevemead...o-level-4-build

2001 GMC Sierra

XSPower D3400

Pioneer AVHD 1400

​MB Quart Component Sets

Pioneer 5x4s

Audiotechnix Power Wire, Speaker Wire, Sound Deadener

DC Audio Level 4 10s

DC Audio 3.5k

Rocford Fosgate R400-4

HID 6k

Slammed Truck on 20s

Candy Blue.

Link to comment
Share on other sites

Dont. You run all positives on both speakers to on BOLT on your box. Than all negatives to one BOLT. than bolts to amp. Simple. You are making it harder. You only need one wire form each push terminal on the subs. Act like the single positive sign and negative sign in the12volt diagram is the bolt not amp.

it is really simple as that just all to one and all to one and done? i feel dumb

2001 GMC Sierra DC Audio Build =http://www.stevemead...o-level-4-build

2001 GMC Sierra

XSPower D3400

Pioneer AVHD 1400

​MB Quart Component Sets

Pioneer 5x4s

Audiotechnix Power Wire, Speaker Wire, Sound Deadener

DC Audio Level 4 10s

DC Audio 3.5k

Rocford Fosgate R400-4

HID 6k

Slammed Truck on 20s

Candy Blue.

Link to comment
Share on other sites

i did something like this, for each voicecoil on my sub, i ran a wire to its own bolt, that way i could change the impedance of the subs from 1 ohm to 4 ohms if i ever wanted to without having to go back inside the box, i can upload a pic of it for you if you want and if i can find one

What the f**k is an appropriate signature supposed to look like?

2013 Kia Forte Koup

Pioneer AVH-X4600BT

iDMax 12

DD M1c @ 2 ohms

Rockford Prime 200.2

Pioneer 6.75" Comp Set

XS S3400, D2700

Project DB Battery Terminals

Axxess ASWC

Stinger HPM Everywhereeee

90 Sq. Ft. of Stinger Roadkill

Stock Alt

Stuff To Come

Sundown X-12

New Amp

New Comps

4 Channel Amp

My Current Build: http://www.stevemeadedesigns.com/board/topic/167462-13-kia-forte-koup-dd-setup/

My Old Build: http://www.stevemead..._+2000 +mustang

Avatar Courtesy of SnowDrifter

Link to comment
Share on other sites

Dont. You run all positives on both speakers to on BOLT on your box. Than all negatives to one BOLT. than bolts to amp. Simple. You are making it harder. You only need one wire form each push terminal on the subs. Act like the single positive sign and negative sign in the12volt diagram is the bolt not amp.

it is really simple as that just all to one and all to one and done? i feel dumb

Yea thats it. Run all 4 positive to one bolt. all four negative to another bolt. You dont need individual bolts unless you want to run 4ohm load. I see no point in making it complicated. Why would you ever need to change impedance unless you were running 2ohm daily .5 comps. Thats not the case here.

Heres a super fast diagram. I know its shitty lol but i did it fast in paint. Trust me I do have better graphics skills haha. You didnt want multiple wires running to terminals on the subs right you were trying to keep only one wire in each terminal. Here you go.

Untitled.png

Edited by Chris Hammer

MY BUILD *****http://tinyurl.com/gmcbuild*****

Vehicles

2005 GMC Canyon

CB1000r - Currently where any future funds are going. (exhasut,bazzaz, ohlins shock, screen, etc.)

crf250r - Used to be race bike..now I just trail ride..practice at the track on it.

CH80 - Daily beater (when nice weather)best 150$ ever spent. 100+mpg

Sold to:

Skullz - pstone11 - Leo1103 - Volvo 63' - pavelpardo - imnew59585

Shower farts still piss me off.

I think theyre pretty neat. When the water runs down your crack as you let one out... its like shitting in a crockpot.
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 303 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...