StoneCold455 Posted September 19, 2012 Report Share Posted September 19, 2012 Link to comment Share on other sites More sharing options...
soundstream15 Posted September 19, 2012 Report Share Posted September 19, 2012 What's that connected to? That's not a good ground bc it looks like its welded on there. I assume that's a front battery ground? Just go straight to the strut tower Link to comment Share on other sites More sharing options...
jeep0312 Posted September 19, 2012 Report Share Posted September 19, 2012 If it is all welded I would say it is a good ground but it doesnt look welded. It looks to be a little loose. is it? 2004 Malibu Classic http://www.stevemead...aq-25-jeep0312/ Kenwood 352U HU (2) Incriminator Audio Death Row 12'' Soundstream Tarantula 1300W MTX 6.5'' mids & Infinity 4x6's in front doors Building as money comes in... beauty panels and amp rack 1996 Jeep Grand Cherokee Traded for a 2004 Malibu 2wd-4wd conversion 4in. lift 32'' Tires 2 Alpine 6.5 in front 2 Sony 6.5 craploads in rear Build: http://www.stevemead...__fromsearch__1 1999 Suzuki Sv650(Work in Progress) Link to comment Share on other sites More sharing options...
jeep0312 Posted September 19, 2012 Report Share Posted September 19, 2012 If that bolt isnt welded on there sand the metal piece to bare metal and it will become a good ground. 2004 Malibu Classic http://www.stevemead...aq-25-jeep0312/ Kenwood 352U HU (2) Incriminator Audio Death Row 12'' Soundstream Tarantula 1300W MTX 6.5'' mids & Infinity 4x6's in front doors Building as money comes in... beauty panels and amp rack 1996 Jeep Grand Cherokee Traded for a 2004 Malibu 2wd-4wd conversion 4in. lift 32'' Tires 2 Alpine 6.5 in front 2 Sony 6.5 craploads in rear Build: http://www.stevemead...__fromsearch__1 1999 Suzuki Sv650(Work in Progress) Link to comment Share on other sites More sharing options...
StoneCold455 Posted September 19, 2012 Author Report Share Posted September 19, 2012 What's that connected to? That's not a good ground bc it looks like its welded on there. I assume that's a front battery ground? Just go straight to the strut tower Yes it is my front battery. I was wondering because I don't see any bare metal contacts and its not really coming in contact with much other than that spacer underneath it. I will see what I can do with it thanks guys Link to comment Share on other sites More sharing options...
jeep0312 Posted September 19, 2012 Report Share Posted September 19, 2012 yeah you need metal to metal contact! Just sand that down to metal and stick a different bolt through and you will be set. 2004 Malibu Classic http://www.stevemead...aq-25-jeep0312/ Kenwood 352U HU (2) Incriminator Audio Death Row 12'' Soundstream Tarantula 1300W MTX 6.5'' mids & Infinity 4x6's in front doors Building as money comes in... beauty panels and amp rack 1996 Jeep Grand Cherokee Traded for a 2004 Malibu 2wd-4wd conversion 4in. lift 32'' Tires 2 Alpine 6.5 in front 2 Sony 6.5 craploads in rear Build: http://www.stevemead...__fromsearch__1 1999 Suzuki Sv650(Work in Progress) Link to comment Share on other sites More sharing options...
rockFord_Expedition Posted September 19, 2012 Report Share Posted September 19, 2012 Probably pretty bad Old School/New School RF Build March 2015 SOTM Winner How to crimp large wire Link to comment Share on other sites More sharing options...
soundstream15 Posted September 19, 2012 Report Share Posted September 19, 2012 What would sticking a different bolt threw it do? Not being a dick here but those kinds of grounds are bad. There's weld spots and it's not a solid piece of metal. Ground to your strut tower or frame. If its a unit body car then strut tower Link to comment Share on other sites More sharing options...
rockFord_Expedition Posted September 19, 2012 Report Share Posted September 19, 2012 What would sticking a different bolt threw it do? Not being a dick here but those kinds of grounds are bad. There's weld spots and it's not a solid piece of metal. Ground to your strut tower or frame. If its a unit body car then strut tower X2 Old School/New School RF Build March 2015 SOTM Winner How to crimp large wire Link to comment Share on other sites More sharing options...
zydrix Posted September 19, 2012 Report Share Posted September 19, 2012 what ever u do, make sure its good an tight. an has a metal to metal contact. no paint or anything like that. My build 98 s10 2.2 3 american bass HD 15s with psi soft parts. (on there way here) atomic at-3000.1 (soon) 146.2 outlaw @39hz., bad alt an bad batt when termed (old 2 12" build) alpine 6.5s in doors infinty 4x6s in dash. clarion cz201 HU. mechman 240a H/O alt stuff i still need. SHCA 2/0 wire SHCA 1/0 to 2/0 adapters Atomic AT-3000.1 Lots of sound deadner new mids an highs, still debating on what to do. A few Deka g31 batts. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.