IM1THE2KING3! Posted September 30, 2012 Report Share Posted September 30, 2012 Hello, I'm new here so please inform me if at any point i'm doing something that is against forum rules. The Basics: Vehicle- 1993 Chevy Silverado 1500 General- This will not be an epic world record build in any way. I am a senior in Mechanical Engineering so both time and money is limited. I try to do the best with what resources I have and can afford. On the side I have installed numerous sound systems for fellow university students. Majority of it being prefab that people simply have me install. I have also built a number of custom sealed boxes, and a small handful of ported ones for people to use. I have fiber glassed once and I learned the hard way through trial and error. This is my first aero/circular port build. I have too many hobbies and not enough time or money. I appreciate all feedback positive or negative as long as it is indeed feedback with suggestions and not just slandering. I WILL BE ASKING LOTS OF QUESTIONS AND SEEKING ADVICE! Gear- I understand I could have done better with some used things, but the majority of products used are all things I had laying around or left over from other people changing thr minds. Headunit- Alpine 9886 Amps- Soundstream 120.4 Granite (old school) Soundstream Tarantula TX1.2000D Considering a second Soundstream Tarantula TX1.2000D Speakers- Front: Polk db461 -scratched due to mounting depth Front: Infinity reference 4x6 6422cfp Rear: MB Quart 6.5 Subs- TWO 15" Subs NEW that are cheap subs and I got them even cheaper, its a start... Plan to run them inverted Specs are as follows: Fs(Hz): 23.4 Qms: 6.589 Vas(ft3): 5.451 Xmax(mm): 15.3 Xmech(mm): 22.95 Qes: .84 Re(ohm): 4 Voice Coil: Dual 2ohm V.C. Diameter(in): 2.5 Rms: 1200 Max: 2800 Qts: .745 1w/1m SPL(db): 85.6 Overall Diameter(in): 15.75 Overall Height(in): 9.375 Mounting depth(in): 8.5 Wire- Knukonceptz KCA 1/0 Knukonceptz distribution block 2 (0 Gauge) to 3 (4/8 Gauge) Battery- Tsunami Side Post long adapters OPEN TO SUGGESTIONS, what is a inexpensive battery upgrade from stock? Anyone know of a kit for dual battery in the engine bay on my truck, ik specific models offered it ALT- Suggestions BIG 3- Wiring done Box Dimensions- Two separate boxes. Width: 21.25 Depth: 17.5 Height: 16.75 V: 2.57477ft^3 4" aero ports I forgot the exact length apprx. 7" Tuning to 35Hz I will post lots of pics! Due to time constraints I will devote Saturday evenings to the build and try to get updates that night, currently I have spent a few hours over two weekends on the build. Link to comment Share on other sites More sharing options...
IM1THE2KING3! Posted September 30, 2012 Author Report Share Posted September 30, 2012 Pics Products: Link to comment Share on other sites More sharing options...
IM1THE2KING3! Posted September 30, 2012 Author Report Share Posted September 30, 2012 Teardown: Link to comment Share on other sites More sharing options...
IM1THE2KING3! Posted September 30, 2012 Author Report Share Posted September 30, 2012 Box: Cut 4" hole but needed 4 1/8... Link to comment Share on other sites More sharing options...
IM1THE2KING3! Posted September 30, 2012 Author Report Share Posted September 30, 2012 Install: Stay tuned. Any and all feedback/suggestions is appreciated. Some Dampening: Ideas: Wrapped Cover: Link to comment Share on other sites More sharing options...
Twostrokeking Posted October 1, 2012 Report Share Posted October 1, 2012 Ahh! More pics dude! I love me a chevy My Truck BuildSpending money on things I don't need, to impress others I don't know.At the end of the day for me its about the love of customizing anything and everything to limits or even past reasonable.-SkyHighCarAudio Link to comment Share on other sites More sharing options...
IM1THE2KING3! Posted May 18, 2013 Author Report Share Posted May 18, 2013 I wanted to update this in case anyone finds it through searching.I ended up doing it all over again after finishing the install of two aero enclosures(sorry I dont have many final pics)I used auto cad and designed a different setup, stay tuned for pics. Link to comment Share on other sites More sharing options...
IM1THE2KING3! Posted May 18, 2013 Author Report Share Posted May 18, 2013 Link to comment Share on other sites More sharing options...
IM1THE2KING3! Posted May 18, 2013 Author Report Share Posted May 18, 2013 Link to comment Share on other sites More sharing options...
IM1THE2KING3! Posted May 18, 2013 Author Report Share Posted May 18, 2013 Fiberglassed Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.