BassHead810 Posted October 17, 2012 Author Report Share Posted October 17, 2012 While those were drying some more resin was applied to the box Little cheat sheet I made up for each section of the box. Port is coming together, these pieces are ready to be glued into one. Am I crazy or does that spell JL Or it could be an M Now its starting to look like a port Apply a liberal amount of glue lol The pieces you see inside the cutout of the baffle will evetually be attached to the back of the port like a rear flare. Rounded sub hole looks nice My 150+ Trunk Build Log Current Setup2 DC XL15's Crossfire XS-8K AudioControl Epic-150Mechman 250 amp altXS D3100 under hood 2 XS D3100 in TrunkSecondSkin Sound Deadening - 120+ sq ft Damplifier Pro2012 North American Street Stock Runner-up - 150.9 on 1800 clamped watts 2013 dB Drag Street Trunk World Champion - 153.9 on 3200 clamped Watts 2013 MECA Trunk 1 World Champion - 152.8 Headrest 2013 MECA Park & Pound 2 World Champion - 130.6My youtube channel (click for Hairtricks) Team dbAddicts Team DC Audio dcsoundlab.com Link to comment Share on other sites More sharing options...
cjvue Posted October 17, 2012 Report Share Posted October 17, 2012 I need a saw like that... Every sheet i cut on mine is off slight and requires sanding FTL... Lol Nice update though! I'm loving the pics of the build! Keep'm coming. My Build Log- T E A M S U N D O W N A U D I O - 2013 DbDrag WF SS1-2 - 5th Place 154.6db 2013 MECA Mod3 CA State Final Champ 153.4db Powered by: Sundown Audio Link to comment Share on other sites More sharing options...
taylorpro Posted October 17, 2012 Report Share Posted October 17, 2012 holy shit you guys had a lot of details in that box. awesome to see the work put in in the process you can't always see at the end. youd guys build some nice stuff for sure jordan. keep it up man. you guys are on the right track for sure 1999 Ford ExplorerTeam Sundown Audio4th 2012 Db Drag WF Street Stock 150.8dbYoutube Channel!http://www.youtube.com/user/BoomyurblownOperation 156 No wall Build Log!http://www.stevemead...x/#entry2196123 Link to comment Share on other sites More sharing options...
BassHead810 Posted October 17, 2012 Author Report Share Posted October 17, 2012 I need a saw like that... Every sheet i cut on mine is off slight and requires sanding FTL... Lol Nice update though! I'm loving the pics of the build! Keep'm coming. Thanks! Yeah that saw rocks. We used to use a p.o.s saw that took 5 minutes to set the fence for everycut and when your started it up the blade would wobble lol. This new saw easily cut the box build time in half if not more. I have lots more good pics I'll post later today holy shit you guys had a lot of details in that box. awesome to see the work put in in the process you can't always see at the end. youd guys build some nice stuff for sure jordan. keep it up man. you guys are on the right track for sure. Thanks alot Taylor. Yeah we spent alot of time on little details of this box. Maybe even too much time but hey it looks good. I even have a video I wanna post later too of some resin action My 150+ Trunk Build Log Current Setup2 DC XL15's Crossfire XS-8K AudioControl Epic-150Mechman 250 amp altXS D3100 under hood 2 XS D3100 in TrunkSecondSkin Sound Deadening - 120+ sq ft Damplifier Pro2012 North American Street Stock Runner-up - 150.9 on 1800 clamped watts 2013 dB Drag Street Trunk World Champion - 153.9 on 3200 clamped Watts 2013 MECA Trunk 1 World Champion - 152.8 Headrest 2013 MECA Park & Pound 2 World Champion - 130.6My youtube channel (click for Hairtricks) Team dbAddicts Team DC Audio dcsoundlab.com Link to comment Share on other sites More sharing options...
Purplehaze Posted October 17, 2012 Report Share Posted October 17, 2012 Very nice work! I'm tuned in! Kickin' Cruiser Seller Feedback Stage 3 Dash, Door Panels,4th Order wall 4 - 15'son a DC 5.0K 2 DC 5.0K'sSolo X 15 (v.2) Sub Build Link to comment Share on other sites More sharing options...
BassHead810 Posted October 17, 2012 Author Report Share Posted October 17, 2012 I decided to smooth out the creases of the port with bondo before I router it. This was my first time using bondo and it didn't turn out as good as I had planned but it will be sanded and eventually painted over. Bondo ready to be sanded The port is going to be interchangeable. The port will be bolted to the faceplate underneath it and can be removed and replace with a lower tuned port which will be attached the same way. This means the holes better be pretty darn straight and accurate so I took the faceplate to the nearest drill press. The faceplate will have T-nuts on the backside so that the holes dont get stripped out from repeated changes using wood screws. The T-nuts will be counter-bored into the surface about 1/8" so that they are definitely below the surface after I pound them in and this will also create a place for the resin to gather. The resin will help keep them from pushing out the back. Here I am boring the hole for the T-nut using the milling machine at my work. Gotta love job perks Bolted down with a few sockethead cap screws to test the fit. Time to resin the back of the faceplate. I put the capscrews in the threads with teflon tape around them so that the resin doesnt get all through the T-nut. After first coat and some sanding All done with the faceplate My 150+ Trunk Build Log Current Setup2 DC XL15's Crossfire XS-8K AudioControl Epic-150Mechman 250 amp altXS D3100 under hood 2 XS D3100 in TrunkSecondSkin Sound Deadening - 120+ sq ft Damplifier Pro2012 North American Street Stock Runner-up - 150.9 on 1800 clamped watts 2013 dB Drag Street Trunk World Champion - 153.9 on 3200 clamped Watts 2013 MECA Trunk 1 World Champion - 152.8 Headrest 2013 MECA Park & Pound 2 World Champion - 130.6My youtube channel (click for Hairtricks) Team dbAddicts Team DC Audio dcsoundlab.com Link to comment Share on other sites More sharing options...
Nikitaaa Posted October 17, 2012 Report Share Posted October 17, 2012 I love it!!! More pictures please Edit- I just downloaded that "boom button app", any idea how loud those frequencies are? Like -3db, 0db, -20db? Lol 2007 M/T Honda Civic Coupe EX (4) Sundown Audio X-8's (2) Ampere Audio 3800.1's (3) Stinger SPV-44 Batteries (1) Mechman 240 3:1 Ratio 4th order sealed from the trunkTEAM NWSPLBest termlab scores to date in Honda trunk:151.7db legal (official) IASCA trunk 3 classBest termlab scores to date in my walled Subie:152.9db legal (unofficial) IASCA advanced 2 class155db outlaw Link to comment Share on other sites More sharing options...
BassHead810 Posted October 17, 2012 Author Report Share Posted October 17, 2012 I love it!!! More pictures please Edit- I just downloaded that "boom button app", any idea how loud those frequencies are? Like -3db, 0db, -20db? Lol Thanks! No not exactly I just know they aren't as loud as the dB Jams Vol 14 CD which i think is 0 dB My 150+ Trunk Build Log Current Setup2 DC XL15's Crossfire XS-8K AudioControl Epic-150Mechman 250 amp altXS D3100 under hood 2 XS D3100 in TrunkSecondSkin Sound Deadening - 120+ sq ft Damplifier Pro2012 North American Street Stock Runner-up - 150.9 on 1800 clamped watts 2013 dB Drag Street Trunk World Champion - 153.9 on 3200 clamped Watts 2013 MECA Trunk 1 World Champion - 152.8 Headrest 2013 MECA Park & Pound 2 World Champion - 130.6My youtube channel (click for Hairtricks) Team dbAddicts Team DC Audio dcsoundlab.com Link to comment Share on other sites More sharing options...
akronjay Posted October 17, 2012 Report Share Posted October 17, 2012 Pretty man looks sick great numbers 4 kicker ks 60 1"AMERICAN BASS DOMES RE DTS 80X2 AMERICAN BASS xd2000 2 OBSIDIAN 15D2 ALL KNU WIRING & RCA THE BIG THREE 1.5FARAD MASSIVE AUDIO CAP 2.0FARAD MASSIVE AUDIO CAP 98 JEEP CHEROKEE avic930 optima red top american bass sq2000 Link to comment Share on other sites More sharing options...
SCS_Audio Posted October 18, 2012 Report Share Posted October 18, 2012 Lining up the woodgrain........worth at least a tenth of a db. 2012 North American Street Stock Runner-up - 150.9 on 1800 clamped watts (Teammate)2013 dB Drag Street Trunk World Champion - 153.9 on 3200 clamped Watts (Teammate)2013 MECA Trunk 1 World Champion - 152.8 Headrest (Teammate)2013 MECA Park & Pound 2 World Champion - 130.6 (Teammate)Checkout our build and videos !! : ) 150+ Trunk Build Log itsgordy1 youtube channel (click for Hairtricks)Smith's Custom SeatsMartinsburg, PA (Second Skin Dealer) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.