Jump to content

The Shitbox build - 151db+ on one DC Lvl 5 18" @36hz!!!


Recommended Posts

Time to post my audio build. I was out of the car audio game for a long time, but last year I started playing around with an SSA DCON 10" for my winter beater and realized I had forgotten how much fun it was. I then ended up playing around with my old RF Punch HX2 8" and soon after purchased a DD 1508. I told myself that I was going to stick with a single 8" so that I wouldn't end up sinking a ton of money into it. Well that didn't last long as I wanted more and an 8" was too much of a compromize, you either get loud or good frequency response. I was thinking about upgrading to a 2508 but found a great deal on a DC Audio Level 5 15" locally. That's where I'm going to start this build thread. Bear with me, there are a lot of pictures to post so I will be doing it over the next few days.

I also consider this a budget build as my main hobby is cars. I'm building an RB26 swapped S13 right now, so most of my money goes there. Here's my build thread for it: http://www.stevemead...y-hobbyproject/

Here is a teaser pic of the current status of the build at this time. I have a lot of pictures to post before I get to this point, so hopefully this tides you over :)

18" Level 5 M1

2012-11-18_05-22-46_462.jpg

Building my box for the 15. 4.5ft3 with 3 4" aero ports, tuned to 33hz:

338322_10150527256601791_804053659_o.jpg

Installing

411041_10150527465226791_1112017938_o.jpg

hooked up to an oldschool Earthquake 40UHC Gold cheater amp (scored 2 of these from a local pawn shop for a good deal)

412636_10150534076326791_595815333_o.jpg

my tweeters are Earthquake Screamers. 1.5" dome tweeters with replacable voice coils. These things get LOUD. frequency response: 1000hz to 24KHz

415678_10150534078506791_230371027_o.jpg

Ordered 8x 8" woofers from partsexpress for midbass, paid $40 shipped for all 8 (free shipping)

457473_10150546795506791_360708834_o.jpg

472262_10150546813136791_1488496917_o.jpg

Got 2 5" midranges for the doors

413408_10150546803766791_1516331289_o.jpg

Building the boxes for the 8s

327347_10150551839866791_719052165_o.jpg

471901_10150551914111791_1943665751_o.jpg

8s installed:

467550_10150553082336791_884203616_o.jpg

Modifying the box, my ports were too close to the back of the box (like 2"), spaced them out and it made a HUGE difference:

467583_10150565724716791_2096118470_o.jpg

476413_10150565771336791_26601933_o.jpg

Ordered 50 more feet of Knu CCA 0ga:

473509_10150566668151791_1882759951_o.jpg

Got my AP30001D in the mail (yeah yeah, it's crap, but remember, budget build)

461172_10150566880471791_1011050934_o.jpg

471783_10150566898836791_1300936139_o.jpg

installed:

474947_10150567237951791_528163864_o.jpg

installing my mids:

462268_10150575857926791_1832403999_o.jpg

464083_10150575858191791_1311100572_o.jpg

460460_10150575903271791_902528151_o.jpg

Link to comment
Share on other sites

  • Replies 46
  • Created
  • Last Reply

Mounting the crossovers under the glovebox

474808_10150575858941791_1508631136_o.jpg

Added a Deep Cycle from Fleet Farm (yeah yeah, it's crap, but remember, budget build)

477072_10150580218136791_1854695558_o.jpg

More Box mods - recessed baffle:

473044_10150580264956791_14756030_o.jpg

470835_10150580540986791_1024408483_o.jpg

Clipped the sub and killed a coil...so recone time (side note...i have since purchased a DD1 and I love it!). My 15" recone with TFS dustcap:

414173_10150588917916791_1762840573_o.jpg

Picked up an AP1504 for my tweeters/mids and an AP3002 for my 8s:

465098_10150588304336791_453039151_o.jpg

Started working on a bracket to mount my second alternator. It's a 125amp from a Nissan Quest:

474234_10150590509066791_861208551_o.jpg

Amps all laid out

463992_10150590510191791_584831794_o.jpg

Installing the amps:

413918_10150590780231791_1326425234_o.jpg

479221_10150590809841791_50989281_o.jpg

470815_10150590962291791_268696804_o.jpg

More alternator work:

472080_10150590963121791_1817248207_o.jpg

456295_10150595700276791_1971524489_o.jpg

476832_10150595697911791_2142474920_o.jpg

463088_10150605348926791_1325538556_o.jpg

Reconing the sub:

476804_10150676622256791_1341274295_o.jpg

476776_10150677845301791_758367984_o.jpg

Soldering the leads:

410941_10150677847241791_275803476_o.jpg

Installed:

414382_10150770565521791_2094287175_o.jpg

Front battery took a crap, picked up a walmart deep cycle for the front (yeah yeah, it's crap, but remember, budget build):

462640_10150776585866791_1868523015_o.jpg

Link to comment
Share on other sites

Decided to try out a Urethane varnish on MDF...turned out looking fantastic but was a huge pain to do:

241942_10150870820431791_83587143_o.jpg

288105_10150873853406791_1663344969_o.jpg

Got my hands on a Term Lab (driver's door open, car on, at the dash...43hz):

178071_10150873856431791_1976913865_o.jpg

repositioned the woofers...made a good amount of difference as 4 were no longer firing at each other

338808_10150875585651791_800592012_o.jpg

Fixing holes...did this at night...didn't need to look pretty as this thing is a heap, but it worked:

287830_10150876937646791_180818017_o.jpg

My friend and I also found that the rear quarter panels were leaking air bad so we great stuffed them.

also tuned the box a bit higher and made a number of other changes and ended up hitting a 150.5 (driver's door open, car on, at the dash...43hz). By this time the sub had 2 dead coils due to clipping again (still hadn't gotten my hands on a dd1...live and learn right?)

468788_10150883495901791_2128575592_o.jpg

Tons more to come later, so stay tuned.

Link to comment
Share on other sites

Sealing up the rocker panels. Had to do it from the inside as the holes on the outside were too huge lol.

288429_10150895671836791_1086952789_o.jpg

323291_10150895677361791_1722329091_o.jpg

336310_10150895680721791_794659633_o.jpg

243612_10150895688036791_1147548095_o.jpg

Sealed up a hole around the antenna

177424_10150895685751791_1078341935_o.jpg

More Great Stuff lol

241917_10150895692676791_1422079793_o.jpg

Back together and sealed up

290008_10150895696856791_899322256_o.jpg

291543_10150895698536791_350633344_o.jpg

For some reason we decided to revamp the whole system before going to one of the local competitions. We removed the back seat and a ton of other stuff. We started at like 8pm Friday night and didn't finish until 10am or so on Saturday morning.

339360_10150923164051791_1825840660_o.jpg

Cut out the useless strut bracing (does nothing for rigidity since it's such thin metal and just spot welded, not to mention that it doesn't even connect). Sorry no before pictures, but we did this to allow the box to slide forward more.

291316_10150923219096791_249988985_o.jpg

416047_10150923220036791_759117263_o.jpg

Removed the sound deadening to find any holes underneith

412524_10150923219506791_2026591156_o.jpg

Patched a few holes in the passenger floor board

221504_10150923378081791_481500782_o.jpg

mounting the amps

411540_10150923377301791_894296607_o.jpg

256269_10150923654846791_559660606_o.jpg

New spare tire well cover

291487_10150923665291791_157044144_o.jpg

Getting close

326773_10150923730391791_1786854029_o.jpg

This is where we were when we left for the event. I rode in the passenger seat while my friend drove and I literally hooked up the subwoofer and remote wires while we were on the highway.

338695_10150923731996791_266699239_o.jpg

Got first place though in Real SPL even after the sub sat in the sun all day and had about .25ohm of additional impedance on top of box rise... was only doing around 2400w clamped at something like 2.73ohms after rise and low voltage due to other issues. Still broke a 150, don't remember exact numbers though. Sub was still only running on 2 coils too:

330784_10150924452136791_1295803522_o.jpg

Link to comment
Share on other sites

Congrats on the win!

Nice job hitting the 50. Hoping I can get there....

Love the two towers of 8's in the back, looks loud!

:good:

This post sent with 100% recycled electrons.
2004 BMW M3
Mechman 280A
2 - XS Power XP3000

1 - XS Power D375

500F of Maxwell SuperCaps (soon to be 1000F)
iPadMini2

Dash mounted O-scope
Audison bitOne (Remote DRC MP)
Highs Amp - PPI Art A404
Hertz HSK130 (HSK165 waiting...)
DC Audio DC9.0K
2- DC Audio XL12m2

LEGAL             - 147.3dB @ 41Hz
OUTLAW         - 150.2dB @ 45Hz

OUTLAW         - 145.7dB @ 30Hz
JUNE 2014 SOTM WINNER

2014 COLORADO PEOPLE'S CHOICE WINNER

SOTM BUILD:
http://www.stevemeadedesigns.com/board/topic/141656-wicks-e46-m3-build-bass-turbo-button-and-a-big-new-addition/page-68#entry2802026

sig-sized6_zps0265e669.png

Link to comment
Share on other sites

Congrats on the win!

Nice job hitting the 50. Hoping I can get there....

Love the two towers of 8's in the back, looks loud!

:good:

Thanks man, it's pretty decent...I've got something big in the works next month...details will come later once I get all of the pictures posted. hint: has to do with 160lbs of subs :D

I'm hoping to hit a 150 sealed at the dash with the 18 as well as pull off a decent hair trick, I was pretty close with the 15, but the 15 had A LOT of time into the box...luckilly I've learned a lot, so hopefully that makes it a lot faster with the new box.

Link to comment
Share on other sites

In the post 3 or 4 above, you said if i can get my hands on a DD 1", maby you find someone near http://www.stevemead...udio-tools-map/

Thanks, cool link, but I actually own a DD1 now. I didn't have one back when those pictures were taken, that's what I was referring to.

Link to comment
Share on other sites

Time for some more

Got the 8's back in

620970_10150932814686791_515062012_o.jpg

One of the things we kept having to seal. The hatch has mucho rust around where the spoiler bolts to it. It's all of the way through mostly. We first tried great stuffing it, but it still leaked. Then we duct taped it, but water was still getting inside. Then I siliconed around the spoiler mounts (used A LOT) and switched the tape to Awesome tape (aluminum hvac tape). As you can see in the picture, single layers weren't enough to keep the pressure in, it kept blowing through (later we found that it blew out the silicone around the center mount for the spoiler. after sealing it up with more hvac tape, we applied more silicone...it's now sealed and sturdy). Also notice the weather stripping we added from walmart around the whole hatch...the hatch still flexes a ton, but at least it stays sealed.

290032_10150895708621791_2125292457_o.jpg

Was driving around and noticed something didn't sound right...after a couple days I went to pull the ports out to swap and found one was detached. My friend and I had an argument about this a few days earlier, i said we needed 2-3 or more layers of tape and he said 1 would be fine, guess which section we decided to try one layer on? lol.

241917_10150903663486791_1490722423_o.jpg

So the 5" mids took a crap (guess that's what you get for $5/each). All i had laying around was a pair of kicker 6x9s. I ghetto rigged them in the doors just to get some more mids...bass is cut to them so the horrible mount job doesn't really make a difference other than looking terrible.

471392_10150904493776791_1501191093_o.jpg

177417_10150904494696791_1420757469_o.jpg

This was the weekend from hell...started on a friday night and iirc, didn't finish till Sunday night.

I had no chop saw, so I built a PVC port cutter out of a cheap harbor freight miter box and some random stuff I had laying around. Works rather well tbh.

256262_10150941461496791_3819488_o.jpg

277888_10150941467221791_1477524390_o.jpg

Finished port

334186_10150941465571791_591213762_o.jpg

things got out of hand when I decided to cut down the box and fiberglass resin it. Was cutting it down to make it 3.75ft3 instead of 4.5 and mount external ports.

338648_10150941471456791_1793375471_o.jpg

Inside of the new port baffle:

202483_10150941473801791_181297691_o.jpg

glassing. Also added a curve to the bottom rear of the box to help direct airflow:

278744_10150941480976791_1741245913_o.jpg

da sanded it down, ran out of time so I just focused on making the port and sub baffles look good since that was pretty much all you could see.

411462_10150941483291791_53298462_o.jpg

242669_10150941486076791_615361274_o.jpg

got her installed. tuning frequency = 36hz

411391_10150941502031791_592194799_o.jpg

Swapping for 43hz ports before another local car show that had a non-sanctioned sound competition. I ended up getting a top 50 trophy for both of my cars (The ChukiMonster (autox car) and The Shitbox) AND I won the sound competition. Hit a 152.7 outlaw in the kick on an audio control (which was actually fairly close to what I hit on my term, maybe about 1-1.5db higher or so, although, I'm thinking the port swap may have hurt me, but never ended up testing for a direct comparison). Anyway, I beat second place by almost 3 db. Second place had a wall with 2 18" subs (still unsure of the brand, they had phase plugs, no idea) in a Ranger. Had a picture of the trophies but I must not have uploaded it to photobucket.

324452_10151014928366791_1301270146_o.jpg

And here's a clue to what I have planned for next month, picked up a second level 5 15

133869_10151024012521791_999087923_o.jpg

Looks pretty massive next to my g/f

244184_10151027811956791_745935250_o.jpg

Large Equipment

408354_10151027812756791_687779695_n.jpg

She likes the big ones hahaha

337260_10151028194986791_792117024_o.jpg

423767_10151028206361791_1664824084_n.jpg

Getting close to being caught up...one or two more picture posts to go.

Link to comment
Share on other sites

nicee bro.. now when will the 240sx get some work done hahaha

2010 Mazda 3

*Rebuild Time*

Subs - (2) AA Mayhems 12's
Sub amp - (1) Populus Audio TPA 6500
Headunit - Pioneer App Radio 2

Batteries - XS Power (1) D3100 up front | 6 XP950 rear

Wire - Sky High 1/0 Gauge wires and RCA's and steve's VM1

Alternator - Singer 260 Externally Regulated

Front Stage: (2) PRV Audio 10W650A (4) PRV Audio 8MR500-PhP-4 (4) DS Bullet Tweets | (2) 6.5 Components (Rear doors)

Mids & high Amp : (2) Populus Audio 100.4

Processor: Rockford 3sixty.3



The Build Log : http://www.stevemeadedesigns.com/board/topic/175922-2010-mazda-3-2-aa-mayhems-12-pg14-new-video/page-11

flakosignature1-1_zps0751010a.png

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 227 Guests (See full list)

    • There are no registered users currently online



×
×
  • Create New...