elflako17 Posted February 11, 2013 Report Share Posted February 11, 2013 why wall with 4 12's? don't the skar's like small boxes? seems like 4 15's is easily doable in a wall in an accord nevertheless, seems like it gets down They are pretty efficient on space yes... 1 cube sealed and 2 cubes ported for my ZVX 12.... I have a 4.x cube box kerfed port tuned to 31.xx... The reason I'm walling with 12's is because of 2 things.l. 1) I have 12's and won't have to recone. Plus the way the coils are I can strap 2 2500's at 2 ohm nominal (1ohm each amp) with my 4 d1 ZVX's so that works out good. 2) the 15's want much more airspace and I don't know if I want to give it up. I'm 6'3" and I like my seat really far back just sayin i feel you on the seat back lol, i'm about the same height and in my explorer my seat is all the way back lol, couldn't deal with a wall Well I'm hoping the wall will not be invasive to my seat. But I'm glad I'm not the only one with the seat all the way back.. Lol hahahah you better start measuring from your seat all the way to the back because if you dont you will have a huge problem 2010 Mazda 3 *Rebuild Time* Subs - (2) AA Mayhems 12's Sub amp - (1) Populus Audio TPA 6500 Headunit - Pioneer App Radio 2 Batteries - XS Power (1) D3100 up front | 6 XP950 rear Wire - Sky High 1/0 Gauge wires and RCA's and steve's VM1 Alternator - Singer 260 Externally Regulated Front Stage: (2) PRV Audio 10W650A (4) PRV Audio 8MR500-PhP-4 (4) DS Bullet Tweets | (2) 6.5 Components (Rear doors) Mids & high Amp : (2) Populus Audio 100.4 Processor: Rockford 3sixty.3 The Build Log : http://www.stevemeadedesigns.com/board/topic/175922-2010-mazda-3-2-aa-mayhems-12-pg14-new-video/page-11 Link to comment Share on other sites More sharing options...
Swordlordboy1234 Posted February 11, 2013 Author Report Share Posted February 11, 2013 why wall with 4 12's? don't the skar's like small boxes? seems like 4 15's is easily doable in a wall in an accord nevertheless, seems like it gets down They are pretty efficient on space yes... 1 cube sealed and 2 cubes ported for my ZVX 12.... I have a 4.x cube box kerfed port tuned to 31.xx... The reason I'm walling with 12's is because of 2 things.l. 1) I have 12's and won't have to recone. Plus the way the coils are I can strap 2 2500's at 2 ohm nominal (1ohm each amp) with my 4 d1 ZVX's so that works out good. 2) the 15's want much more airspace and I don't know if I want to give it up. I'm 6'3" and I like my seat really far back just sayin i feel you on the seat back lol, i'm about the same height and in my explorer my seat is all the way back lol, couldn't deal with a wall Well I'm hoping the wall will not be invasive to my seat. But I'm glad I'm not the only one with the seat all the way back.. Lol hahahah you better start measuring from your seat all the way to the back because if you dont you will have a huge problem I'm gonna measure when I have time, I think I'll be fine. When the seats are out I have a good ton of room. Hoping I can fit a 4th order with my seat exactly where it is now My old YouTube channel : http://www.youtube.com/user/SwordLords1234?feature=mhee My old build log : http://www.stevemeadedesigns.com/board/topic/161872-96-accord-b2-sundown-sky-high-dc-power-re-re-build-for-heatwave/page-37 My New Build - http://www.stevemeadedesigns.com/board/topic/207041-2016-mazda-6-sql-build/ 2016 Mazda 6 Touring JL Fix 86 - OEM signal correction B2 prototype DSP 6to8 B2 Ref63 - 3 way active set 2 B2 Class H quattro's 1 B2 Zero.5R @.5 2 B2 HNv3 12 d2 B2 SLIP40 - Lithium in the trunk Northstar Group 35 under the hood 100ft 2/0 welding cable 30ft 4ga welding cable 20ft 8ga welding cable All stinger OFC speaker wire Soundrive custom RCA's Tons of attention to detail.... Can it be perfect? Link to comment Share on other sites More sharing options...
elflako17 Posted February 11, 2013 Report Share Posted February 11, 2013 why wall with 4 12's? don't the skar's like small boxes? seems like 4 15's is easily doable in a wall in an accord nevertheless, seems like it gets down They are pretty efficient on space yes... 1 cube sealed and 2 cubes ported for my ZVX 12.... I have a 4.x cube box kerfed port tuned to 31.xx... The reason I'm walling with 12's is because of 2 things.l. 1) I have 12's and won't have to recone. Plus the way the coils are I can strap 2 2500's at 2 ohm nominal (1ohm each amp) with my 4 d1 ZVX's so that works out good. 2) the 15's want much more airspace and I don't know if I want to give it up. I'm 6'3" and I like my seat really far back just sayin i feel you on the seat back lol, i'm about the same height and in my explorer my seat is all the way back lol, couldn't deal with a wall Well I'm hoping the wall will not be invasive to my seat. But I'm glad I'm not the only one with the seat all the way back.. Lol hahahah you better start measuring from your seat all the way to the back because if you dont you will have a huge problem I'm gonna measure when I have time, I think I'll be fine. When the seats are out I have a good ton of room. Hoping I can fit a 4th order with my seat exactly where it is now do it i want to see this be done ASAP lol 2010 Mazda 3 *Rebuild Time* Subs - (2) AA Mayhems 12's Sub amp - (1) Populus Audio TPA 6500 Headunit - Pioneer App Radio 2 Batteries - XS Power (1) D3100 up front | 6 XP950 rear Wire - Sky High 1/0 Gauge wires and RCA's and steve's VM1 Alternator - Singer 260 Externally Regulated Front Stage: (2) PRV Audio 10W650A (4) PRV Audio 8MR500-PhP-4 (4) DS Bullet Tweets | (2) 6.5 Components (Rear doors) Mids & high Amp : (2) Populus Audio 100.4 Processor: Rockford 3sixty.3 The Build Log : http://www.stevemeadedesigns.com/board/topic/175922-2010-mazda-3-2-aa-mayhems-12-pg14-new-video/page-11 Link to comment Share on other sites More sharing options...
FieroGrande Posted February 11, 2013 Report Share Posted February 11, 2013 The front of the box looks good. Subs look beefy Link to comment Share on other sites More sharing options...
scooter99 Posted February 11, 2013 Report Share Posted February 11, 2013 Everything looks good man! What size port are you working with? Looks big! Not saying that's bad, just saying. I'm about to build one for 2 12's at 4" wide and that thing looks like it's more around 6 wide. Looking forward to more! That's a kerfed port bro. It's actually less then 3 inches wide in the tunnel parts...but the inside you can see the flared port and the outside its a nice kerf painted black. The of section is prob 3 inches wide plus the 3 inch wide port. Take a second look. My box is less then 32 inches wide and that's the only way he could fit 2 12s flat and still fit a port Now that I took a second look and searched through some of the pics, I do see the kerf now. Good one! Looks good, regardless! Can't wait to see the wall! Facebook Page: S99Creations 2006 F250 Lariat Build Link to comment Share on other sites More sharing options...
Swordlordboy1234 Posted February 11, 2013 Author Report Share Posted February 11, 2013 why wall with 4 12's? don't the skar's like small boxes? seems like 4 15's is easily doable in a wall in an accord nevertheless, seems like it gets down They are pretty efficient on space yes... 1 cube sealed and 2 cubes ported for my ZVX 12.... I have a 4.x cube box kerfed port tuned to 31.xx... The reason I'm walling with 12's is because of 2 things.l. 1) I have 12's and won't have to recone. Plus the way the coils are I can strap 2 2500's at 2 ohm nominal (1ohm each amp) with my 4 d1 ZVX's so that works out good. 2) the 15's want much more airspace and I don't know if I want to give it up. I'm 6'3" and I like my seat really far back just sayin i feel you on the seat back lol, i'm about the same height and in my explorer my seat is all the way back lol, couldn't deal with a wall Well I'm hoping the wall will not be invasive to my seat. But I'm glad I'm not the only one with the seat all the way back.. Lol hahahah you better start measuring from your seat all the way to the back because if you dont you will have a huge problem I'm gonna measure when I have time, I think I'll be fine. When the seats are out I have a good ton of room. Hoping I can fit a 4th order with my seat exactly where it is now do it i want to see this be done ASAP lol Working on it. Im thinking it will be done some time this summer. I gotta address the springs... then i gotta find 2 more zvx 12's d1coil that are in good condition... then another 2500.. then a nice bank of XS power... then the rest i can get pretty easy but those are the main things. The front of the box looks good. Subs look beefy Thanks bro, much appreciated. those subs are bad ass. today i was playing something that had to be below 20hz... and those subs with all that motor force pushed out the note. i was amazed. it wasnt hitting with authority.. but the fact that my subs would reproduce that effing low was kinda like a wow moment there. My old YouTube channel : http://www.youtube.com/user/SwordLords1234?feature=mhee My old build log : http://www.stevemeadedesigns.com/board/topic/161872-96-accord-b2-sundown-sky-high-dc-power-re-re-build-for-heatwave/page-37 My New Build - http://www.stevemeadedesigns.com/board/topic/207041-2016-mazda-6-sql-build/ 2016 Mazda 6 Touring JL Fix 86 - OEM signal correction B2 prototype DSP 6to8 B2 Ref63 - 3 way active set 2 B2 Class H quattro's 1 B2 Zero.5R @.5 2 B2 HNv3 12 d2 B2 SLIP40 - Lithium in the trunk Northstar Group 35 under the hood 100ft 2/0 welding cable 30ft 4ga welding cable 20ft 8ga welding cable All stinger OFC speaker wire Soundrive custom RCA's Tons of attention to detail.... Can it be perfect? Link to comment Share on other sites More sharing options...
Swordlordboy1234 Posted February 11, 2013 Author Report Share Posted February 11, 2013 Everything looks good man! What size port are you working with? Looks big! Not saying that's bad, just saying. I'm about to build one for 2 12's at 4" wide and that thing looks like it's more around 6 wide. Looking forward to more! That's a kerfed port bro. It's actually less then 3 inches wide in the tunnel parts...but the inside you can see the flared port and the outside its a nice kerf painted black. The of section is prob 3 inches wide plus the 3 inch wide port. Take a second look. My box is less then 32 inches wide and that's the only way he could fit 2 12s flat and still fit a port Now that I took a second look and searched through some of the pics, I do see the kerf now. Good one! Looks good, regardless! Can't wait to see the wall! Yeah... The wall should be sick. Keep tuned. i might have small updates.... hint.. if anyone wants to see a wall done quicker dont be scared to find me good deals on the other equipment im looking for =] My old YouTube channel : http://www.youtube.com/user/SwordLords1234?feature=mhee My old build log : http://www.stevemeadedesigns.com/board/topic/161872-96-accord-b2-sundown-sky-high-dc-power-re-re-build-for-heatwave/page-37 My New Build - http://www.stevemeadedesigns.com/board/topic/207041-2016-mazda-6-sql-build/ 2016 Mazda 6 Touring JL Fix 86 - OEM signal correction B2 prototype DSP 6to8 B2 Ref63 - 3 way active set 2 B2 Class H quattro's 1 B2 Zero.5R @.5 2 B2 HNv3 12 d2 B2 SLIP40 - Lithium in the trunk Northstar Group 35 under the hood 100ft 2/0 welding cable 30ft 4ga welding cable 20ft 8ga welding cable All stinger OFC speaker wire Soundrive custom RCA's Tons of attention to detail.... Can it be perfect? Link to comment Share on other sites More sharing options...
Swordlordboy1234 Posted February 11, 2013 Author Report Share Posted February 11, 2013 Which one of you picture whores wants more? nothing super crazy but pics non the less..... i also took my photo editor on my ipad out and started doing some door panel concept ideas, along with a trunk beauty panel idea for my 3-4 Xs and my 2 2500's..... i also might be tempted to post a screen shot of what i want my wall to look like. ill give a hint. It was done by BHE and it had warden 12's My old YouTube channel : http://www.youtube.com/user/SwordLords1234?feature=mhee My old build log : http://www.stevemeadedesigns.com/board/topic/161872-96-accord-b2-sundown-sky-high-dc-power-re-re-build-for-heatwave/page-37 My New Build - http://www.stevemeadedesigns.com/board/topic/207041-2016-mazda-6-sql-build/ 2016 Mazda 6 Touring JL Fix 86 - OEM signal correction B2 prototype DSP 6to8 B2 Ref63 - 3 way active set 2 B2 Class H quattro's 1 B2 Zero.5R @.5 2 B2 HNv3 12 d2 B2 SLIP40 - Lithium in the trunk Northstar Group 35 under the hood 100ft 2/0 welding cable 30ft 4ga welding cable 20ft 8ga welding cable All stinger OFC speaker wire Soundrive custom RCA's Tons of attention to detail.... Can it be perfect? Link to comment Share on other sites More sharing options...
iamamp3pimp Posted February 11, 2013 Report Share Posted February 11, 2013 post that thing up. (2008) Florida State Champion Bass Race 140-149.9 (2008) Florida State Champion Bass Boxing Middleweight Class Link to comment Share on other sites More sharing options...
Swordlordboy1234 Posted February 11, 2013 Author Report Share Posted February 11, 2013 post that thing up. Don't worry mr robin, you will see it soon enough. I'm gonna stack up the supplies I need and then some cash and ill have to take a quick trip to Florida when your not busy .... I'm gonna work on the concept ideas more before I post them. My bad drawing skills on this iPad are embarrassing lol but I think it gets the idea across My old YouTube channel : http://www.youtube.com/user/SwordLords1234?feature=mhee My old build log : http://www.stevemeadedesigns.com/board/topic/161872-96-accord-b2-sundown-sky-high-dc-power-re-re-build-for-heatwave/page-37 My New Build - http://www.stevemeadedesigns.com/board/topic/207041-2016-mazda-6-sql-build/ 2016 Mazda 6 Touring JL Fix 86 - OEM signal correction B2 prototype DSP 6to8 B2 Ref63 - 3 way active set 2 B2 Class H quattro's 1 B2 Zero.5R @.5 2 B2 HNv3 12 d2 B2 SLIP40 - Lithium in the trunk Northstar Group 35 under the hood 100ft 2/0 welding cable 30ft 4ga welding cable 20ft 8ga welding cable All stinger OFC speaker wire Soundrive custom RCA's Tons of attention to detail.... Can it be perfect? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.