Jump to content
Second Skin Audio

Need a box design


Ghoagland

Recommended Posts

I would like someone to design a box for a zvx 15 that is ported at @32hz and is 3 ft^3, the cut out is 13.9, sub woofer displacement is 0.17 ft^3 , and the mounting depth is 9.3.

It will be a trunk box so port back sub back and would like it to be double baffled, willing to pay for a good design thanks!!!!

Will be running an aq2200 in a 1995 toyota avalon xl

Link to comment
Share on other sites

So here is a suggestion:

Enclosure Specifications:

Fb = 32.5 Hz
Vb = 3 ft^3

External Height = 17 in
External Width = 30 in
External Depth = 20.5 in

Port Width = 3 5/8 in

Cut Sheet List:

* All Dimensions in Inches.
* Wood Thickness is 3/4 for all Parts.

External Enclosure Parts:

2 x Front & Back (3 parts) = 30 x 17

Left & Right Sides = 18 1/4 x 15 1/2

Top & Bottom = 30 x 18 1/4

L Port Internal Assembly Parts:

Front to Back = 14 5/8 x 15 1/2
Extension = 18 1/2 x 15 1/2

Assembly guide (generic dimensions):

SFPFHieffport_zps816fea55.jpg


Important notes:

- The 45s if you want to do them are 2 1/2" wide except the one/ones inside the port, if you want that let me know.

- All trunk boxes built outside the car need to fit in their way in not just have the right dimensions.

- The port needs 3 5/8" of free airspace in front of it for proper operation.

- Setting your amp subsonic filter to 28Hz is suggested.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   1 Member, 0 Anonymous, 340 Guests (See full list)

×
×
  • Create New...