Miguels Posted February 23, 2016 Author Report Share Posted February 23, 2016 AI prices Machining & Labor Operations: 100% CNC Ported Intake Runners 100% CNC Ported Exhaust Runners 100% CNC Ported Combustion Chambers 100% CNC Professional Competition Quality Valvejob Factory Valves Cleaned & Precision Ground PCD milled to ensure flatness, surface finish, & achieve desired chamber volume (62 - 73cc) Intake Flange, Exhaust Flange, and Valve Cover Rail PCD Milled to new surface finish specs Machining & Labor Cost: $995 No CNC Chamber Contouring - Subtract: $95Bronze Guide Liners installed & honed to ideal clearances to refurbish worn out guides. - Cost: $125Replace OEM guides with Full Bronze Guides & hone to ideal clearances - Cost: $250 PSI 1511 MaxLife Endurance Spring Kit w/ OEM Replacement Seals. - Cost: $250Manley 23622 Titanium Retainers for OEM, PAC, PSI, etc. beehive springs - Cost: $195Lunati Gold dual valve spring kit w/ lightweight steel retainers. Lift capacity to .660" - Cost: $225BTR .660" Polished Dual Spring Kit w/ locators, viton seals, & Titanium Retainers - Cost: $300 total $2090 cam not included my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/ Link to comment Share on other sites More sharing options...
bighossf150 Posted February 23, 2016 Report Share Posted February 23, 2016 where are you getting 2k from? Im seeing around 1400 with new valve guides and lunati gold springs, or you can just ball out and get some mast heads, I love mine Used to have a loud truck 2009 Corvette Z06, H/C/I, 150 shot, g force tune, 730rwhp/690rwtq 2013 F-150 limited, MPT Tune, leveled on 35"s Link to comment Share on other sites More sharing options...
Miguels Posted February 23, 2016 Author Report Share Posted February 23, 2016 budget build was my main goal here. i only have the budget to cam and port the heads through le.. i can also wait and save more money to do more to it but summer is near and want it running by then if not it will be for next year wiring, ecm, and lingenfelter module is setting me back $1100+ my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/ Link to comment Share on other sites More sharing options...
Miguels Posted January 2, 2017 Author Report Share Posted January 2, 2017 just removed the DC 5k from the expo and will be using it in the impala.. the temporary system will be 2 Fi SP4 in a prefab sealed box.. going to be putting the 6x8 infinity kappa in the doors and maybe some 6x9 pioneers in the rear on a DC 175.4.. that or use the Fi 7 carbon mids i have.. still debating on what i will use for mids and highs but planning on getting it done by the end of the month my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/ Link to comment Share on other sites More sharing options...
Miguels Posted February 27, 2017 Author Report Share Posted February 27, 2017 my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/ Link to comment Share on other sites More sharing options...
Miguels Posted February 27, 2017 Author Report Share Posted February 27, 2017 my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/ Link to comment Share on other sites More sharing options...
Miguels Posted February 27, 2017 Author Report Share Posted February 27, 2017 my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/ Link to comment Share on other sites More sharing options...
Miguels Posted February 27, 2017 Author Report Share Posted February 27, 2017 Finally got it playing.. 1 sp4 on a DC 5k at 2 ohms.. sounds clean but not loud enough. 2 aa carbon mids and 2 6x9 are over powerin the bass my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/ Link to comment Share on other sites More sharing options...
Miguels Posted March 11, 2017 Author Report Share Posted March 11, 2017 my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.