christamez80 Posted March 11, 2013 Report Share Posted March 11, 2013 Ok so i have 4 Obsidian Audio 18's all Dual 4 ohms. Had 2 Planet Audio BB2400.1 hooked up to them strapped at 2 ohms. I want to go with 2 Crescendo Audio BC2200. I dont have electrical to run at .5 ohm. I have mechman 200 amp alt and 2 xs d3100 in back. i would like to go with 1 big amp but most amps are better at 1 ohm or lower. any suggestions? Link to comment Share on other sites More sharing options...
WillPwn4Food Posted March 11, 2013 Report Share Posted March 11, 2013 soundqubed 3500d.1, dc 5k, Sundown saz 3500, 4500's.Edit: Hifonics? Wall build: http://www.stevemeadedesigns.com/board/topic/174827-walled-taurus-with-lambo-doors/#entry2571893 real men dont use fuses Neither do moronsSays the guy with lambo doors on his Ford Taurus. Link to comment Share on other sites More sharing options...
christamez80 Posted March 11, 2013 Author Report Share Posted March 11, 2013 soundqubed? ive seen them but only when i tried to look up audioque. im kinda new to the system stuff. as far as newer name brands. i have a budget. Link to comment Share on other sites More sharing options...
mnrookie Posted March 11, 2013 Report Share Posted March 11, 2013 soundqubed? ive seen them but only when i tried to look up audioque. im kinda new to the system stuff. as far as newer name brands. i have a budget. Audioque changed their name to soundqubed. Link to comment Share on other sites More sharing options...
Noel989 Posted March 11, 2013 Report Share Posted March 11, 2013 soundqubed? ive seen them but only when i tried to look up audioque. im kinda new to the system stuff. as far as newer name brands. i have a budget. Well what's your budget? Build Log - http://www.stevemead...-cruiser-el-pt/ Link to comment Share on other sites More sharing options...
christamez80 Posted March 11, 2013 Author Report Share Posted March 11, 2013 $900 for either one big amp or 2 smaller ones. Link to comment Share on other sites More sharing options...
WillPwn4Food Posted March 11, 2013 Report Share Posted March 11, 2013 And that's just amp? No wiring, etc.? Try finding a used DC 5k, or get a used Sundown 4500. Wall build: http://www.stevemeadedesigns.com/board/topic/174827-walled-taurus-with-lambo-doors/#entry2571893 real men dont use fuses Neither do moronsSays the guy with lambo doors on his Ford Taurus. Link to comment Share on other sites More sharing options...
P4killer_ Posted March 11, 2013 Report Share Posted March 11, 2013 My question is: You don't have the electrical for a 2200 @.5 you said let's say that's 275a max But you want an amp that like 500a ? Imo an aq or soundq 3500 would be fine. If you have 2 3100s plus the starter bat and 200a alt. You should be decent. You could run a 5k or 4500 and be oook not great but you should be ok just be smart about it. Edit I'm sorry I misread that. You have two 2200s.. Gotcha well yea then you'd have to get a 5k amp or better so the aq is out. You might not even notice tooo much difference with a 5k though.. ehh maybe. I say get two 3500s but you'd ideally need more batts. That'd be a worthwhile dif imo Setup: 2010 Hyundai Elantra Factory Unit via 4 chan NVX LOC Excessive Amperage "H/O" Alt Xs D3400/ Xs XP3000 Big 3. 2 Runs of +, 2 Runs of - DD M3b and 2 12" AQ HDC4s Link to comment Share on other sites More sharing options...
P4killer_ Posted March 11, 2013 Report Share Posted March 11, 2013 With 4 dual 4 subs you have .5 or 2 ohm obvi. So 1 5k at .5 vs 2 3500s at 1ohm prolly be pretty close. I'm torn lol. I bet your seeing around 3500w with the two 2ks at 1ohm. Wanna clamp em and see? Setup: 2010 Hyundai Elantra Factory Unit via 4 chan NVX LOC Excessive Amperage "H/O" Alt Xs D3400/ Xs XP3000 Big 3. 2 Runs of +, 2 Runs of - DD M3b and 2 12" AQ HDC4s Link to comment Share on other sites More sharing options...
WillPwn4Food Posted March 11, 2013 Report Share Posted March 11, 2013 With 4 dual 4 subs you have .5 or 2 ohm obvi. So 1 5k at .5 vs 2 3500s at 1ohm prolly be pretty close. I'm torn lol. I bet your seeing around 3500w with the two 2ks at 1ohm. Wanna clamp em and see? BB2400.1's on average clamp around 2000w each @ 1ohm. I've heard most people end up right around 2100. I had mine strapped to 2 Fi N2's and they were doing some serious work, so it must be close to 4k strapped. Wall build: http://www.stevemeadedesigns.com/board/topic/174827-walled-taurus-with-lambo-doors/#entry2571893 real men dont use fuses Neither do moronsSays the guy with lambo doors on his Ford Taurus. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.