gally Posted March 26, 2013 Report Share Posted March 26, 2013 gain? low pass filter?? if your radio has a subwoofer ON/OFF mode turn the subwoofer mode on ON... 2010 Chevrolet Cruze Radio --- pioneer mvh-200vbt Front/back --- alpine type s 6.5" Sub Control --- Pac LC1 Sub Amp --- GZPA 1.4K Sub --- GZNW 15XSPL D1 Battery - GZBP 12.2500X Link to comment Share on other sites More sharing options...
MD7786 Posted March 26, 2013 Author Report Share Posted March 26, 2013 Well I didn't check amp settings cause I don't touch them. And yes the sub on/off is on. Link to comment Share on other sites More sharing options...
gally Posted March 26, 2013 Report Share Posted March 26, 2013 should check the amp settings and then try playing... 2010 Chevrolet Cruze Radio --- pioneer mvh-200vbt Front/back --- alpine type s 6.5" Sub Control --- Pac LC1 Sub Amp --- GZPA 1.4K Sub --- GZNW 15XSPL D1 Battery - GZBP 12.2500X Link to comment Share on other sites More sharing options...
MD7786 Posted March 26, 2013 Author Report Share Posted March 26, 2013 Well my amp is turned all the way down. I don't wanna fry my speaker. The problem is it used to be LOUD and now its not. Link to comment Share on other sites More sharing options...
Jessica Posted March 26, 2013 Report Share Posted March 26, 2013 um, have you checked your fuses? edit: Is the sub in a sealed or ported box? Just want to check that. I ask because well, you wont burnt smell coils in a sealed box. Rest in peace, walled 87 accord build log 03' Corolla build with AA Mayhem inside. My super random youtube channel and terrible camera work. Wiring comparison by CaptainzPlanetz Wire and fuse guide by Guest SyKo13 Link to comment Share on other sites More sharing options...
MD7786 Posted March 26, 2013 Author Report Share Posted March 26, 2013 Its ported. And I just pulled sub out to make sure. And if it was a fuse it wouldn't even play. I can turn the bass boost up on my deck and it pounds. But its always been at 0. Could my amp need to be turned up? Even tho it all of a sudden 1 day wasn't loud. Link to comment Share on other sites More sharing options...
MD7786 Posted March 26, 2013 Author Report Share Posted March 26, 2013 O and I do have filter off. Link to comment Share on other sites More sharing options...
MD7786 Posted March 26, 2013 Author Report Share Posted March 26, 2013 Low pass and infrasonic are both off. Link to comment Share on other sites More sharing options...
MD7786 Posted March 27, 2013 Author Report Share Posted March 27, 2013 So I looked and my lp filter was off. I turned it to 12 and it sounded good. Could that roast my speaker if i bump too hard. Idk if it could have been hit to too but before the amp was set with a dd1 Link to comment Share on other sites More sharing options...
Tabi DimplesMarie Beall-Francis Posted March 27, 2013 Report Share Posted March 27, 2013 So I looked and my lp filter was off. I turned it to 12 and it sounded good. Could that roast my speaker if i bump too hard. Idk if it could have been hit to too but before the amp was set with a dd1 so did you turn the lp fliter? and set the fq? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.