NEW PRODUCT! SMD SunFlash - UV Activated Polyester Resin (AVAILABLE NOW!)

[Skater229]

yes, i think i CAN ship it to Europe. I will double check. I might be limited to quart sized containers though for now. I know i have to take a Hazmat class soon to ship out the gallon sized containers (or bigger). Until i do that i will be drop shipping the larger containers. It will be labeled at the manufacturer under my name so it will be ready to go. (soon)

and i am sure if you dig deep enough you can find out what it is, but again, they aren't going to sell it to anyone. He told me they wouldn't do that. I am not going to over charge, i am going to charge what i need to charge to make it right, but i won't be making millions off of it. It will be easiest just to get it from me.

When you check for shipping to Europe can you also check APO/FPO address as well? If so I'll be down with a quart or two... Thanks...

[TNichy]

The lazy bastard in me approves of this product!

my lazy ass self agrees. lol

[mbdblue]

very interesting.....my only question (and it might be a dumb one) is do you have to cure each layer 1 at a time, or can you bang out 4-5 layers and still have it able to cure all the way through? In a sense, it wouldn't matter so much being that the wait time is so low, but I'm more curious as to whether or not the resin cures through layers like a regular polyester resin would, or you have to treat each one.

[Raptorman]

Treat each one I would think.

[bassaddiction]

what happens if u store it in cold places. in ny gets anywhere from -15 to 105 f

[meade916]

very interesting.....my only question (and it might be a dumb one) is do you have to cure each layer 1 at a time, or can you bang out 4-5 layers and still have it able to cure all the way through? In a sense, it wouldn't matter so much being that the wait time is so low, but I'm more curious as to whether or not the resin cures through layers like a regular polyester resin would, or you have to treat each one.

you can reapply more right away. You can sand right away too. You have a "floobie-doobie", or a "flapper-dapper" (some glass that wont stay down)?, just hold it with a stick or your finger with rubber glove on and it will set up right in front of you (out in the sunlight).

[meade916]

what happens if u store it in cold places. in ny gets anywhere from -15 to 105 f

should be good, just keep it out of the sun until you are ready for it to dry.

[meade916]

i havent fiberglassed yet but will be in need of doing my doors.

my question are mostly the same as others but was wondering if maybe you would sell something like starter kits. a kit that comes with say a gallon of resin, brushes, cups, body filler, and sand paper? that way its a one stop shop deal. get everything you need to do the job in 1 order.

as far as uv lights for curing it, go to home depot or lowes and you can get uv light from there for indoor gardening and hang 1 or 2 in your garage. brush the resin on flip the switch got eat come back and do the next layer. flip the switch check smd forum and repeat until project is done.

i believe these work on a different wavelength then your home depot (or better lol) "gardening supply" store. It is a different type. I will have info on what you would need soon.

[ChevyBoy95]

Looks sic bro. only question I have is... what about us people that live in the desert areas? Flash point say 89F. West Texas heat.... 110+ for months in the summer. IIRC the record couple summers ago was 127.

do you know what UV means?

[onyx1silverado]

What about the type of uv light if you can't necessarily get it into the sun?