phillipc421 Posted April 4, 2013 Report Share Posted April 4, 2013 Hey there, I'll be doing my first setup soon and I need some advice. I have some money to spend, but I'll look used and try to save where ever I can. I have a Jeep Cherokee 95. I'll be doing it all in the back space with the rear seats down. I really don't have an idea of where to start as far as brands are concerned. I know I want it to be very loud and have people be able to feel it from a good distance. I've been reading that the more cone space the better, so I was thinking about going with multiple 10's or 12's? Is that a good bet? Any help is appreciated! Thank you! Link to comment Share on other sites More sharing options...
john253a Posted April 4, 2013 Report Share Posted April 4, 2013 If your on a budget bigger sizes can save you more money as the per unit price is where you spend most of it But the trade off is box size to cone area + motor force How much do you have to spend Because you have a large car You could easy do 4x oa18 on a t2500 for 1700 Or for the same price you could do 2 x series on same amp Link to comment Share on other sites More sharing options...
ChevyBlazerMan Posted April 4, 2013 Report Share Posted April 4, 2013 I think do what i did i bought 2 Kicker CVX 15s make sure their CVXs not CvRs. THey are the loudest set of subs i ever bought and ive had a few setups and by far these subs in my opinion are the best Mr ChevyBlazerMan Setup ALarm Prestige 2 way screen + Shock senser/Proximty Senser Memphis Eq 2 Kicker Cvx 15 2 ohm Custom Ported Box Made By Me Amp Is Hifonics Brutus 1700D Dash Speakers Not Sure on Model But They Are 3.5 Memphis Door Speakers 2 Orion Xtr Pro Tweeters Door Speakers 4 Orion Xtr Pro 6.5s 0 Gauge wire around in truck Xs Power 3400d just got one from local shop on a discount. Just installed today with the big 3 upgrade O guage Tomorrow hoping to run all door speaker and hook up my 4 channel Rockford amp Link to comment Share on other sites More sharing options...
zydrix Posted April 4, 2013 Report Share Posted April 4, 2013 Get 1 SQ HDC3 18" on a q-2200. Or 2 HDC3 18s on a q-3500.1. That would be a killer setup. Set gains properly an run clean power of course. But make sure u have the electrical to support big power. My build 98 s10 2.2 3 american bass HD 15s with psi soft parts. (on there way here) atomic at-3000.1 (soon) 146.2 outlaw @39hz., bad alt an bad batt when termed (old 2 12" build) alpine 6.5s in doors infinty 4x6s in dash. clarion cz201 HU. mechman 240a H/O alt stuff i still need. SHCA 2/0 wire SHCA 1/0 to 2/0 adapters Atomic AT-3000.1 Lots of sound deadner new mids an highs, still debating on what to do. A few Deka g31 batts. Link to comment Share on other sites More sharing options...
SkarredSierra Posted April 5, 2013 Report Share Posted April 5, 2013 you could go with 2 sundown sa15's with a rockford 1200.1 that should give you some great bass for a lower cost. the sundowns are like 230 bucks each and the amp runs around 250 or so. and it will take less money on the electrical aspect. big 3 with a yellow top and a kinetik battery in back. everything should be less than 1500 together. Link to comment Share on other sites More sharing options...
naughtyca Posted April 6, 2013 Report Share Posted April 6, 2013 i have a friend who did this setup and he is waiting for his subs since these are pre sale to save more money you can get the audiopipe apsm 1500 for $125, if you get four 12" that is only $400 and if you 2 amps of the apsm 1500 you will rocking close to 3k and you ahve only spend around $600 good luck pm me if you have any question amp apsm 2000 $189 C2 audio 12" $99 each free shipping here's the c2 audio specs presale on Sub 12" 600watt $99 C2 Audio Threatcon-2 Specifications: 12" Threatcon-2 Subwoofer 600 Watts RMS Available in Dual 4 Ohm and Dual 2 Ohm Dual 2 Ohm: Threatcon-2 12d2 Dual 4 Ohm: Threatcon-2 12d4 3" Copper 4 Layer Voice Coil Double Stacked 160 oz Magnet High Current Flat Woven Tinsel Leads Dual Spider Pack Dual Stitched Non Pressed Paper Cone- with Mid Excursion Foam Surround Enclosure Recommendations: Sealed: 1.0 - 1.25 ft^3 Ported: 1.5 - 2.0 ft^3 @ 35hzSealed: 2.0 - 2.50 ft^3 Ported: 3.0 - 4.0 ft^3 @ 35hz T/S Parameters: FS: 36.7HZ VAS: 40.9 DM3 QES: .44 QTS: .40 BL: 16.8 MMS: 167.7G SENS: 91.5 DB XMAX: 28 MM Woofer Dimensions: EXT DIA: 12.48" CUT OUT DIA: 11.18" MOUNT DEPTH: 5.82" Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.