Amart88 Posted August 15, 2013 Report Share Posted August 15, 2013 (edited) Just wondering if you have any other options available for shipping to Canada then the 2 options on wcca website. I've already got my discount from the trade in program but the shipping is almost as much as the volt meter before the discount and will cost a bit more then the volt meter when I use the discount. Really looking forward to picking one up, but just want to see if you have any better options on shipping it up north before I order one. Thanks. Steve I'm assuming you missed this on the last page. Just want to get an answer before I pay more for shipping then the meter. nothing i can do about the crazy shipping to canada. Its the taxes and duties and other fee's that get you. I don't set the pricing, it is all calculated at check out. I know it sucks! Yep, You will just have to deal with it and blame the country. Canada customs can be a PITA for duties + taxes and other ridiculous fees. Sometimes it would be cheaper for me to drive 300 miles to the border to pick something up than pay the added shipping fees. Edited August 15, 2013 by Amart88 Quote My 2005 s10 blazer build. 4 zcon 18's walled. Link to comment Share on other sites More sharing options...
RMac18 Posted August 16, 2013 Report Share Posted August 16, 2013 Alright Steve thanks for the answer. Sucks that I'm paying more for shipping from customs and taxes then the meter itself but still looking forward to picking one up. Quote Link to comment Share on other sites More sharing options...
SnowDrifter Posted August 28, 2013 Report Share Posted August 28, 2013 Here's my video. It's "meh" at best. But it does show how the vm-1 performs under "meh" conditions lol 1 Quote ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444 Link to comment Share on other sites More sharing options...
meade916 Posted August 28, 2013 Author Report Share Posted August 28, 2013 Here's my video. It's "meh" at best. But it does show how the vm-1 performs under "meh" conditions lol what is your paypal addy? email it to me, so i don't forget.....and i will paypal you $5 for the vid! thanks for making it! 2 Quote All SMD products + MORE available at my store here! https://wccaraudio.com/ Subscribe to My Youtube Channel! Over 1,000,000 subscribers strong! Turn on your notifications! http://www.youtube.com/meade916 Follow My Instagram! Daily live feeds from the shop, exclusive content way before it hits my Youtube channel...and little squares with photo's in them http://www.instagram.com/meade916 The Official SMD Facebook fan Page https://www.facebook.com/SteveMeadeDesigns/ Follow my Tweet (Twitter) http://www.Twitter.com/meade916 Link to comment Share on other sites More sharing options...
SnowDrifter Posted August 28, 2013 Report Share Posted August 28, 2013 what is your paypal addy? email it to me, so i don't forget.....and i will paypal you $5 for the vid! thanks for making it! Email sent. Thank you!! Stay tuned. When my amp comes in the mail next months I'll be making some more videos of this. I'll be taking advantage of the meter's response time to see how much of a difference capacitors make. I'm stoked Quote ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444 Link to comment Share on other sites More sharing options...
pitbullninja Posted December 7, 2013 Report Share Posted December 7, 2013 Steve's gone mad with volts Quote Link to comment Share on other sites More sharing options...
bassbang89 Posted December 17, 2013 Report Share Posted December 17, 2013 just like it says.... you got one of those garbage volt meters, with the adjustment screw on the back? Chances are, it will break soon. Even if it doesn't, how can you trust a volt meter, that you get to choose the reading? How ridiculous is that? If you had a DMM with an adjustment screw, would you trust it? For voltage? how about impedance? If you had 4ohm speaker reading 3.6 ohms, should it be ok to adjust it to read 4? How about if you were checking a diode and it said the electronic flows from A to B......but you didn't agree, so you switched it so now it reads B to A? would you trust that? Forget reliability, any "meter" that can be adjusted to your taste is really nothing i want to rely on. anyway, that being said, if you have a working or NON WORKING volt meter, of any kind, you can send it to me and i will give you a $25.00 coupon code towards purchase of an SMD VM-1. Our product is MADE IN AMERICA by the best engineers in the 12v business (IMO), highly reliable (should last a lifetime), very fast and highly accurate. You cannot adjust ours to suite your needs. It is what it is right out of the box. here is how you do it. Send Volt meter to: Steve Meade Designs, Inc. 2160 Bell Ave Suite C Sacramento, CA 95838 please put a note with your name, email addy, phone number or contact info of some sort and when i receive it, i will send you the coupon code. don't know what the VM-1 is? here is a link to more info: http://www.wccaraudio.com/smd-12v-volt-meter-smd-vm-1.html ok now who is in? NO LIMIT either! If you have 5, i will give you that discount on all 5. If you like, you can email us [email protected] and let us know your's is on the way so we will look out for it. Promise to make a youtube video and after i see it uploaded, i will return ANOTHER $5 bucks to your paypal accnt. How is THAT for a deal? or, if you would just like to buy one, and don't have a trade in... use SMDVM1 (coupon code) and save $10 bucks off listed price. thanks everyone! So I'm assuming that this deal has stopped or??? Quote BASS_BANG Link to comment Share on other sites More sharing options...
meade916 Posted December 18, 2013 Author Report Share Posted December 18, 2013 deal is still on for anyone who wants to do it... 1 Quote All SMD products + MORE available at my store here! https://wccaraudio.com/ Subscribe to My Youtube Channel! Over 1,000,000 subscribers strong! Turn on your notifications! http://www.youtube.com/meade916 Follow My Instagram! Daily live feeds from the shop, exclusive content way before it hits my Youtube channel...and little squares with photo's in them http://www.instagram.com/meade916 The Official SMD Facebook fan Page https://www.facebook.com/SteveMeadeDesigns/ Follow my Tweet (Twitter) http://www.Twitter.com/meade916 Link to comment Share on other sites More sharing options...
traider79 Posted March 4, 2014 Report Share Posted March 4, 2014 I hate to bring up old threads but is this still active? Quote Great! Link to comment Share on other sites More sharing options...
poorfish88 Posted March 18, 2014 Report Share Posted March 18, 2014 I got a couple of POS meters coming your way Steve. I think I'm still gonna buy a SMD volt meter today. I won't get the deal but I'll get the meter faster. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.