djscrappydee Posted May 20, 2013 Report Share Posted May 20, 2013 I plan on running my 0 gauge from under the hood to the back. my question where is the best/easiest way to run it from under the hood? I have a 2002 Yukon. thanks! (2) PSI p2 18's Crescendo 2000 Audio Technix 0 gauge/ SHCA 0 gauge Pioneer AVH-P2400BT yellow top optima big 3 . xs batt. Link to comment Share on other sites More sharing options...
meridianofinsanity Posted May 22, 2013 Report Share Posted May 22, 2013 You can run the power wire through the firewall then run it under the floor trim clip panels back to the amps Link to comment Share on other sites More sharing options...
Pioneerchuck Posted May 22, 2013 Report Share Posted May 22, 2013 Probably easiest place if you wanted to keep from running it through the frame would be right in by the passenger kick area. Link to comment Share on other sites More sharing options...
ChevyBoy95 Posted May 22, 2013 Report Share Posted May 22, 2013 with my 95 truck, i just wire along the frame. but if you have enough room on the fire wall, you can cut a decent sized hole, grommet the hole and run the wire under the carpet between the mounting feet of the drivers seat, under the back seats between the mounting feet as well. Then bring the wire to where you need it. Best Score to Date : 160.5 dB Outlaw (47Hz)[4 XM 15's & 2 Taramps Bass 12k's] BL : http://www.stevemeadedesigns.com/board/topic/147800-chevyboy95s-4-15s-7krms-wall-1533-db-on-half-power/YouTube: http://www.youtube.com/hitemwiththeflex/ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.