robsmokingood Posted May 22, 2013 Report Share Posted May 22, 2013 Hey guys, A close buddy just ordered a sundown d4 e15" off Amazon for his 2000 chrysler cirrus. Excited to get it in a box built by my boys from team asshole. (: Just looking for some input from someone who's toyed with/ or owns an e15 do you like it ? cons/pros wondering what it can handle power wise for a daily setup? from what ive seen & heard about the e series, there really good starter subs, Rob, last build was my malibu walled on a single skar 4500 @.33 daily 6 deka g31 batts Singer 330a alt 4 runs of 3/0 front-back Three hdc3 15 Did a 154.6 this summer at Grassroots Building a 99 yukon denali atm ? 18 from canada ontario Link to comment Share on other sites More sharing options...
Sean.D Posted May 22, 2013 Report Share Posted May 22, 2013 For the quality there good, for the price.. amazing. It was hearing a pair of E-10's that persuaded me to buy sundown, I splurged and went with a couple SA-15s. But both series can take a beating. The most i've really seen anyone run to them is about 1kw, I'm sure there are people that push them farther. But can I ask why did he/you go with the dual 4? Its gonna limit you when it comes to buying an amp, unless you pick up a second woofer... 2x Sundown SA-15s 8 cubes tuned to 30hz sealed in trunk Soundstream Rub 1.1600 Soundstream Rub 5.800 4x Kinetik hc600 Link to comment Share on other sites More sharing options...
robsmokingood Posted May 22, 2013 Author Report Share Posted May 22, 2013 Thats what convinced us, was the price for the quality of sundown. thanks for the reply bro , also the reasoning for the d4 impedance is because the car its going into will only be wired down to 2ohms, for a simple, basic, daily setup. Until he feels he wants another one ive been looking into the e series for a little while now and im really looking forward to being able to toy with the woofer a bit last build was my malibu walled on a single skar 4500 @.33 daily 6 deka g31 batts Singer 330a alt 4 runs of 3/0 front-back Three hdc3 15 Did a 154.6 this summer at Grassroots Building a 99 yukon denali atm ? 18 from canada ontario Link to comment Share on other sites More sharing options...
Sean.D Posted May 22, 2013 Report Share Posted May 22, 2013 Good deal man! Throw up some pics of the box you guys make for it, I'd like to see it! 2x Sundown SA-15s 8 cubes tuned to 30hz sealed in trunk Soundstream Rub 1.1600 Soundstream Rub 5.800 4x Kinetik hc600 Link to comment Share on other sites More sharing options...
robsmokingood Posted May 23, 2013 Author Report Share Posted May 23, 2013 I plan on doing a quick install log of iit seeing how mines been but on pause -.- thanks bro!! last build was my malibu walled on a single skar 4500 @.33 daily 6 deka g31 batts Singer 330a alt 4 runs of 3/0 front-back Three hdc3 15 Did a 154.6 this summer at Grassroots Building a 99 yukon denali atm ? 18 from canada ontario Link to comment Share on other sites More sharing options...
Bump4life Posted May 23, 2013 Report Share Posted May 23, 2013 i got a friend of a friend i did a setup for running 500rms to his single E12. same coil and everything. sounds good as sundown get Buyer/Seller Feedback Thread: http://www.stevemead...5015-bump4life/ MB C220 153 Trunk Car Build Log: http://www.stevemead...d/#entry1840136 MB C280 Ipad Dash SQ Build Log: http://www.stevemeadedesigns.com/board/topic/194484-bump4lifes-new-benz-tony-c-relay-kit-pictures-ce-electric-audison-front-stage-installed/ My SPL Log: http://www.stevemead...__fromsearch__1 BMW M340 xDrive Stock, for now. Corner Load 10" maybe soon. But does 10s in the 1/4... Best Scores out of a trunk 153.0 sealed legal full tilt clamped 5524 @ 42 hz 154+ windows down, 155+ kick Link to comment Share on other sites More sharing options...
robsmokingood Posted May 27, 2013 Author Report Share Posted May 27, 2013 i got a friend of a friend i did a setup for running 500rms to his single E12. same coil and everything. sounds good as sundown get very good to know Bump, the dimensions for this box are top 34x20 bttm 34x20 left 11.5x18.5 right 11.5x18.5 top34x11.5 bottom34x11.5 Port 28" tube 7" in diameter. Looking forward to getting it all started today, we have wood,screws,glue, what were waiting on is the sub.. supposed to arrive tmrw sometime. Also me and my boy are gonna pick up some fiber glass resin to seal it 100% and for sturdiness. from my math this box is 5.12 ft3 . could someone bud in and correct me if im wrong ? i did it really quickly, gatta go to school. -Rob last build was my malibu walled on a single skar 4500 @.33 daily 6 deka g31 batts Singer 330a alt 4 runs of 3/0 front-back Three hdc3 15 Did a 154.6 this summer at Grassroots Building a 99 yukon denali atm ? 18 from canada ontario Link to comment Share on other sites More sharing options...
CleanSierra Posted May 27, 2013 Report Share Posted May 27, 2013 Volume is way off. After displacements of port and sub you have a total volume of 3.18 cubes and before displacement, you only had 4 cubes with the dimensions you listed. Is this going sub up firing into the trunk lid? Im not the one you want to try to troll. Just a fyi for you. Link to comment Share on other sites More sharing options...
robsmokingood Posted May 27, 2013 Author Report Share Posted May 27, 2013 i knew my math was wrong, i was in a rush. So correction itl be 3.18ft3 my bad!! & yessir, we got the port today, and the fiberglass, all thats left to get is fiber glass matte, then we start it tommorow. since the rain delayed us. how do i figure out what this things tuned to ? Volume is way off. After displacements of port and sub you have a total volume of 3.18 cubes and before displacement, you only had 4 cubes with the dimensions you listed. Is this going sub up firing into the trunk lid? last build was my malibu walled on a single skar 4500 @.33 daily 6 deka g31 batts Singer 330a alt 4 runs of 3/0 front-back Three hdc3 15 Did a 154.6 this summer at Grassroots Building a 99 yukon denali atm ? 18 from canada ontario Link to comment Share on other sites More sharing options...
Sean.D Posted May 27, 2013 Report Share Posted May 27, 2013 If you have a volume of 3.18 after port/driver displacement.. should put you just over a tuning of 31hz, 2x Sundown SA-15s 8 cubes tuned to 30hz sealed in trunk Soundstream Rub 1.1600 Soundstream Rub 5.800 4x Kinetik hc600 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.