Wood Posted March 2, 2016 Author Report Share Posted March 2, 2016 CLEAN work Dude...... Those door panels Moar vids of it playing!!! Appreciate the love brother!! Still contemplating if want to throw the screens in there or not... I'll probably try it this week some time.. I really like it with the speakers displayed esp since that is exactly how my A Pillars are.. I'm going to drop on here in the next 15min!! Yep, I dig the exposed speaker look for sure. Screens would be stealthy though too. Some maroon flocking in that recessed area around the speakers would be dope.... But then I really color contrasting accents.... That contrast is sweet!! The only thing about that is that would be the only thing in my interior color matched ... The reason I did black vinyl was to keep that stock feel, which is also the reason I measured like crazy to retain as close to factory profile as possible.. So not only are they close to factory as far as looks, but they BARELY stick out as far as the kick panel, so I have full range of motion with my doors closed... I would love the steal look, but it's just SOMETHING about that open look lol... I'm about to post a picture of how the interior looks right now (without the screens) and I'm going to post the video .. finally finished processing 2011 Nissan Altima aka Red Ruby HEADUNIT: Pioneer AVH X2700BS ELECTRICAL: -Singer 230a -Northstar gr34 -(2) Northstar SMS220 w/ Custom Terminals from 12V Metalworkz -100% Welding Cable FRONT STAGE:-(2 Sets) Hertz HSK165 -Hertz HSK130 -Ampere Audio 125.4 SUB STAGE: -(3) Sundown Audio SA REV2 12's -Ampere Audio 3800.1 V2 MISC (NON AUDIO RELATED): -Interior & Exterior Lights LED -Gloss Black Roof (PAINTED) -15% Front, 5% Rear Tint -Roof Spoiler -20" TSW Snettertons (20x8.5 front, 20x10 rear) -Custom Projector Retrofit (FX-R 3.0, 6.5k HID, Morimoto Mini H1 (faux projector), Quad Starry Night Halos) ----- COMING SOON!! -Aftermarket Fog Lights -Custom Painted Engine Covers My Build Log: http://www.stevemeadedesigns.com/board/topic/169869-woods-2011-altima-aka-red-ruby-new-video-more-updates/page-109 Retrofit Build Log: http://www.stevemeadedesigns.com/board/topic/185787-hid-projector-retrofitting-diy-by-wood/#entry2765346 Link to comment Share on other sites More sharing options...
Wood Posted March 2, 2016 Author Report Share Posted March 2, 2016 Here's how the interior look as a whole with the doors and a pillars installed!! 2011 Nissan Altima aka Red Ruby HEADUNIT: Pioneer AVH X2700BS ELECTRICAL: -Singer 230a -Northstar gr34 -(2) Northstar SMS220 w/ Custom Terminals from 12V Metalworkz -100% Welding Cable FRONT STAGE:-(2 Sets) Hertz HSK165 -Hertz HSK130 -Ampere Audio 125.4 SUB STAGE: -(3) Sundown Audio SA REV2 12's -Ampere Audio 3800.1 V2 MISC (NON AUDIO RELATED): -Interior & Exterior Lights LED -Gloss Black Roof (PAINTED) -15% Front, 5% Rear Tint -Roof Spoiler -20" TSW Snettertons (20x8.5 front, 20x10 rear) -Custom Projector Retrofit (FX-R 3.0, 6.5k HID, Morimoto Mini H1 (faux projector), Quad Starry Night Halos) ----- COMING SOON!! -Aftermarket Fog Lights -Custom Painted Engine Covers My Build Log: http://www.stevemeadedesigns.com/board/topic/169869-woods-2011-altima-aka-red-ruby-new-video-more-updates/page-109 Retrofit Build Log: http://www.stevemeadedesigns.com/board/topic/185787-hid-projector-retrofitting-diy-by-wood/#entry2765346 Link to comment Share on other sites More sharing options...
Wood Posted March 2, 2016 Author Report Share Posted March 2, 2016 Also here's a quick car wash demo I took today in between class and work! I can't be anymore happy with this setup... not only does it get down, but sounds good doing it too!!! (Don't forget to watch it in HD ) 2011 Nissan Altima aka Red Ruby HEADUNIT: Pioneer AVH X2700BS ELECTRICAL: -Singer 230a -Northstar gr34 -(2) Northstar SMS220 w/ Custom Terminals from 12V Metalworkz -100% Welding Cable FRONT STAGE:-(2 Sets) Hertz HSK165 -Hertz HSK130 -Ampere Audio 125.4 SUB STAGE: -(3) Sundown Audio SA REV2 12's -Ampere Audio 3800.1 V2 MISC (NON AUDIO RELATED): -Interior & Exterior Lights LED -Gloss Black Roof (PAINTED) -15% Front, 5% Rear Tint -Roof Spoiler -20" TSW Snettertons (20x8.5 front, 20x10 rear) -Custom Projector Retrofit (FX-R 3.0, 6.5k HID, Morimoto Mini H1 (faux projector), Quad Starry Night Halos) ----- COMING SOON!! -Aftermarket Fog Lights -Custom Painted Engine Covers My Build Log: http://www.stevemeadedesigns.com/board/topic/169869-woods-2011-altima-aka-red-ruby-new-video-more-updates/page-109 Retrofit Build Log: http://www.stevemeadedesigns.com/board/topic/185787-hid-projector-retrofitting-diy-by-wood/#entry2765346 Link to comment Share on other sites More sharing options...
Wood Posted March 2, 2016 Author Report Share Posted March 2, 2016 Also I been holding on to these for a while but have been super lazy!! It's a PITA to not only take off the front bumper, but to run wire's into the cabin for the switch.. But since it was finally time for me to remove my retrofit to make final adjustments/upgrades, I went a head and FINALLY installed my fog lights... The factory bulb was replaced with the new LED HID kits they have now... I love the look of it.. not SUPER bright light normal PnP hid kits, but it lights enough foreground to where my headlights will take over, so I'll hang on to these for a while before going with a normal PnP hid kit.. Anyways, here's how the fog lights look!! 2011 Nissan Altima aka Red Ruby HEADUNIT: Pioneer AVH X2700BS ELECTRICAL: -Singer 230a -Northstar gr34 -(2) Northstar SMS220 w/ Custom Terminals from 12V Metalworkz -100% Welding Cable FRONT STAGE:-(2 Sets) Hertz HSK165 -Hertz HSK130 -Ampere Audio 125.4 SUB STAGE: -(3) Sundown Audio SA REV2 12's -Ampere Audio 3800.1 V2 MISC (NON AUDIO RELATED): -Interior & Exterior Lights LED -Gloss Black Roof (PAINTED) -15% Front, 5% Rear Tint -Roof Spoiler -20" TSW Snettertons (20x8.5 front, 20x10 rear) -Custom Projector Retrofit (FX-R 3.0, 6.5k HID, Morimoto Mini H1 (faux projector), Quad Starry Night Halos) ----- COMING SOON!! -Aftermarket Fog Lights -Custom Painted Engine Covers My Build Log: http://www.stevemeadedesigns.com/board/topic/169869-woods-2011-altima-aka-red-ruby-new-video-more-updates/page-109 Retrofit Build Log: http://www.stevemeadedesigns.com/board/topic/185787-hid-projector-retrofitting-diy-by-wood/#entry2765346 Link to comment Share on other sites More sharing options...
Wood Posted March 2, 2016 Author Report Share Posted March 2, 2016 Last but not least, last Friday I got some custom exhaust work done on my baby (hence the growl in the demo video) Got my muffler and resonator deleted and added some 4" tips.. Only other engine mod is a Takeda CAI I'm actually going to go back and get an aftermarket hi flow resonator to get rid of the rasp but keep that straight pipe sound.. It gets a bit raspy in certain RPMS, but overall for a 4cyl, it sounds damn good!! Couldn't be more happy (well I will after I get the resonator installed lol) 2011 Nissan Altima aka Red Ruby HEADUNIT: Pioneer AVH X2700BS ELECTRICAL: -Singer 230a -Northstar gr34 -(2) Northstar SMS220 w/ Custom Terminals from 12V Metalworkz -100% Welding Cable FRONT STAGE:-(2 Sets) Hertz HSK165 -Hertz HSK130 -Ampere Audio 125.4 SUB STAGE: -(3) Sundown Audio SA REV2 12's -Ampere Audio 3800.1 V2 MISC (NON AUDIO RELATED): -Interior & Exterior Lights LED -Gloss Black Roof (PAINTED) -15% Front, 5% Rear Tint -Roof Spoiler -20" TSW Snettertons (20x8.5 front, 20x10 rear) -Custom Projector Retrofit (FX-R 3.0, 6.5k HID, Morimoto Mini H1 (faux projector), Quad Starry Night Halos) ----- COMING SOON!! -Aftermarket Fog Lights -Custom Painted Engine Covers My Build Log: http://www.stevemeadedesigns.com/board/topic/169869-woods-2011-altima-aka-red-ruby-new-video-more-updates/page-109 Retrofit Build Log: http://www.stevemeadedesigns.com/board/topic/185787-hid-projector-retrofitting-diy-by-wood/#entry2765346 Link to comment Share on other sites More sharing options...
scooter99 Posted March 2, 2016 Report Share Posted March 2, 2016 You an android guy or an apple sheep? Android 4 Lyfe hahahaha I have a Samsung Galaxy Note 8.0 I'll sell you for a good price. It's in great condition. It's wifi though, not cellular. But there are ways around that. I was going to use it for my gauges and monitoring my Powerstroke, but I'm going to get an Edge CTS Insight 2 Monitor instead. I'm not wild about the gauge set up on this system I'm on. It's a nice little tablet though. CLEAN work Dude...... Those door panels Moar vids of it playing!!! Appreciate the love brother!! Still contemplating if want to throw the screens in there or not... I'll probably try it this week some time.. I really like it with the speakers displayed esp since that is exactly how my A Pillars are.. I'm going to drop on here in the next 15min!! Yep, I dig the exposed speaker look for sure. Screens would be stealthy though too. Some maroon flocking in that recessed area around the speakers would be dope.... But then I really color contrasting accents.... Every time I see that pic Jamie, I think to myself..."God that's Flocking Beautiful!!" Yeah, I'm on that flocking train too. It's a process, but it's real nice when it's done right. You can see mine on my civic build. I think it's somewhere around page 120 or there abouts. I can't see at work, because all of those pics were hosted off of Facebook, and that's blocked here at work. Facebook Page: S99Creations 2006 F250 Lariat Build Link to comment Share on other sites More sharing options...
jcarter1885 Posted April 14, 2016 Report Share Posted April 14, 2016 Man I appreicate ya for the bass fix today, pulled up on me while I was hooping. Way better than the last triple 10" setup, Im very impressed with those Soundqubeds. Tail lights dancing and all. Ill let you know tomorrow if I'll ride to the show. Nav-TV Zen V Audio Interface AudioControl DM-608 (2) Stevens Audio Neo-Comp Full-Size Horns (4) Faital Pro 6PR160 6.5" AudioControl LC-6.1200 (1) Fi Neo 4.7 15" D2 in 3.74 Cubic Feet @ 27.70 Hz Ampere Audio AA3800.1 Odyssey ODP-AGM48 Battery (Starting) Odyssey ODX-AGM31 Battery (Trunk) Big 3 - 2\0 Welding Cable, KnuKonceptz Speaker Wire & 1/0 Power Cable, NVX RCAs, Second Skin (Speaker Tweaker Pads, Damplifier Pro Mat), Diode Dynamics LEDs Link to comment Share on other sites More sharing options...
reedal Posted October 6, 2016 Report Share Posted October 6, 2016 Hey man, it's been a while since I've seen you on the forum. anymore upgrades to Red Ruby? SMD Tool Map https://www.stevemeadedesigns.com/board/topic/193176-smd-tool-map-new-november-2014/ Build log https://www.stevemeadedesigns.com/board/topic/197217-reeds-03-tahoe-hat-sqaq-singer-xs-shca-cockbox-80prs/?page=32 Link to comment Share on other sites More sharing options...
bsneon98 Posted October 6, 2016 Report Share Posted October 6, 2016 Was just thinking about this build today too! Build Log: http://www.stevemeadedesigns.com/board/topic/152954-1998-plymouth-neon-updates/ Link to comment Share on other sites More sharing options...
Soccerballzs Posted October 6, 2016 Report Share Posted October 6, 2016 Here's how the interior look as a whole with the doors and a pillars installed!! Gotta Love Hertz and Ampere!! http://www.stevemeadedesigns.com/board/garage/vehicle/2438-jeep-commander/I Pioneer P99RSAmpere 38002-Ampere 125/44-6.5 inch Hertz HSK XL Mids4-8 inch JL Audio ZR Midwoofer 2-5.25 Satori Mids2-Morel Tweeters, 2 Hertz Milles 3 inch on A pillars2-Hertz Silk tweeters DC Audio Level 5/12 Skyhigh Wire Mechman 320 XS Power D3100MO Funniest Thread of the Year 2013: http://www.stevemead...dy-being-a-pos/ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.