SoCalzLife Posted June 8, 2013 Report Share Posted June 8, 2013 I'm going to be building a box for my RF t1 this next week and i wanted to get some opinions from you guys and if i should make some changes. my box dimensions will beWidth- 30"Height- 17"Depth- 12" It will have a port opening of 2" and the length is about 19" going down the center tuned around 36-37hz The Cubic feet im pretty sure is 2.68ftIts going to be rear firing both the sub and the port If you guys have any opinions on this box let me know... the box i have right now is way to small, thats why im building this one. Link to comment Share on other sites More sharing options...
alaskanzx5 Posted June 9, 2013 Report Share Posted June 9, 2013 those specs on torres get me 38hz with 31" of port and 2.32 cuft after displacement except the sub displacement and no bracing, single baffle. its a good start, depends on what you trying to do, spl, daily, lows? t1500bdcp 2 t2d4 15" 1 t600.4 1 t400.2 1 set p1 tweets singer alt, tons of wiring, smd vm-1, 80prs, back seat delete, still in the works, aiming for a 145-147 with the ability to play 25hz up to 50hz. Link to comment Share on other sites More sharing options...
Joe X Posted June 9, 2013 Report Share Posted June 9, 2013 1.94 cubes @ 41.8 Hz once the sub displacement is accounted for. Hardly a fit for low tuned music. Link to comment Share on other sites More sharing options...
SoCalzLife Posted June 9, 2013 Author Report Share Posted June 9, 2013 its for a daily driver....i want it to be good all around...hitting the lows hard, yet still having good sound. the cuts for i have for my port is 7.77"x15.5" and 9.65"x15.5 jw how this sub is going to be hitting in XB. the sub is being powered by RF P1000.1BD amp Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.