Jump to content

Recommended Posts

Do you think that you'd even hear the difference? If you're competing, that's a different story.

On 5/8/2011 at 7:38 PM, Kranny said:
On 5/8/2011 at 7:35 PM, 'Maxim' said:

It hurts me inside when I read stuff like this and remember you're 15

LMFAO so true

:blush:

Mitsubishi 3000GT (Old Build)

Headunit: Pioneer 80PRS

Frontstage: (2) McLaren Audio MLT-2 Tweeters & (4) PRV Audio MR Series Neo 6.5" Mids

Substage: 4 15" Hybrid Subs - Tantric Motors & Sundown Softies

Amps: Banda 2.4D Amp (Tweets), American Bass VFL 350.4 (Mids), and (2) Ampere 3800s

Electrical :Singer 260A Alt & JY Power Lithium

 

2005 Chevy Colorado Ext Cab

Headunit: Pioneer 80PRS

Frontstage: 4 PRV 700Ti Tweets & 6 10" Delta Mids on 3000wrms

Substage: 6 Fi BTL 18s in a 4th Order Walkthrough on 3 Wolfram 4500s

Electrical: Singer "390" and JY Power

My Official Feedback Thread

Link to comment
Share on other sites

Well, why would get the D2s? Don't you want to run at 1 ohm to get the most out of the amp? If you're getting 2 D2 coiled subs, you'll have to wire at 2 ohms final load, or.5 ohm. Getting D4 coils would allow you to write at 1 ohm and get the most out if either of those amps. What made you think you needed D2s in the first place?

Im not the one you want to try to troll. Just a fyi for you.

Link to comment
Share on other sites

Well, why would get the D2s? Don't you want to run at 1 ohm to get the most out of the amp? If you're getting 2 D2 coiled subs, you'll have to wire at 2 ohms final load, or.5 ohm. Getting D4 coils would allow you to write at 1 ohm and get the most out if either of those amps. What made you think you needed D2s in the first place?

Whats wrong with a nominal impedance of 0.5 ohms?

2011 Ford Ranger Sport 4.0 v6

2 sundown audio prototype nsv4 15s

crossfire 4k wired to 0.4 ohm

15 banks of maxwell 3.0 caps @ 18v

triple alts (x2 us alt 250's, x1 singer 320)

153 at 23hz

Link to comment
Share on other sites

Ugh.... do you have strong enough electrical to back up .5 ohm? I never suggest for a guy to run .5 ohm for daily. Get the right amp and the right coil configuration to run the proper impedance

You never suggest to run 0.5 ohm daily?

2011 Ford Ranger Sport 4.0 v6

2 sundown audio prototype nsv4 15s

crossfire 4k wired to 0.4 ohm

15 banks of maxwell 3.0 caps @ 18v

triple alts (x2 us alt 250's, x1 singer 320)

153 at 23hz

Link to comment
Share on other sites

Ugh.... do you have strong enough electrical to back up .5 ohm? I never suggest for a guy to run .5 ohm for daily. Get the right amp and the right coil configuration to run the proper impedance

You never suggest to run 0.5 ohm daily?

That's what he said..

xbox 360 gamertag-greenrocks420

Not insulting you or anything, but did you just call us "bloody winging fairies" ?

Link to comment
Share on other sites

Ugh.... do you have strong enough electrical to back up .5 ohm? I never suggest for a guy to run .5 ohm for daily. Get the right amp and the right coil configuration to run the proper impedance

You never suggest to run 0.5 ohm daily?

That's what he said..

Never had a single issue running 0.5 ohm daily on any of my amps...

To the OP: If you are going to run below 1 ohm I would suggest the big 3 in 1/0 ofc with at least one run of 1/0 ofc to the back and a beefy AGM battery (XS power D3100)...If you do that you will be golden...otherwise you may risk ruining your amplifier.

2011 Ford Ranger Sport 4.0 v6

2 sundown audio prototype nsv4 15s

crossfire 4k wired to 0.4 ohm

15 banks of maxwell 3.0 caps @ 18v

triple alts (x2 us alt 250's, x1 singer 320)

153 at 23hz

Link to comment
Share on other sites

Dude, seriously? We are talking about a 1200 Watt system. Buy the D4 subs and move on. Don't decide to run.5 ohms for a little over 1000W.

And to SPLAddict, I'm glad you haven't had issues running .5 ohms,that's fantastic. I don't suggest half ohm for daily, and never will.

  • Like (+1 Rep) 1

Im not the one you want to try to troll. Just a fyi for you.

Link to comment
Share on other sites

Dude, seriously? We are talking about a 1200 Watt system. Buy the D4 subs and move on. Don't decide to run.5 ohms for a little over 1000W.

And to SPLAddict, I'm glad you haven't had issues running .5 ohms,that's fantastic. I don't suggest half ohm for daily, and never will.

Whats wrong with my recommendation?

Have you had a bad experience with running at 0.5 daily that you now won't recommend it? Just curious

2011 Ford Ranger Sport 4.0 v6

2 sundown audio prototype nsv4 15s

crossfire 4k wired to 0.4 ohm

15 banks of maxwell 3.0 caps @ 18v

triple alts (x2 us alt 250's, x1 singer 320)

153 at 23hz

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...