caskinsro Posted June 27, 2013 Report Share Posted June 27, 2013 Well, I currently have 4 sa-8's, all are d4. Moneys not exactly all the best right now, so I am trying to find a solution without busting the wallet too hard. (3-350) But right now I have a Hifonics BRZ1200 powering 2 of them at 1 ohm. The issue is going to be adding 2 more. Really didnt think it through very well, confused D2-s and D4s, figured on wiring (4) d4s to 1 ohm ( I know...) So with that amp, would it be possible to pick up another one and just run a new set of rca's and remote to power the other 2 all in one enclosure? I know the amp's cant be linked together, but I should be able to use the RCA out to the other amp correct? Sorry for being quite the newb at everything. Not something I do everyday. Prefer engines Quote Link to comment Share on other sites More sharing options...
Joe X Posted June 29, 2013 Report Share Posted June 29, 2013 The BRZ1200 has an output to feed a second amp so you can do that. You will need to gain match though. Quote Link to comment Share on other sites More sharing options...
Kranny Posted June 29, 2013 Report Share Posted June 29, 2013 cant you strap brz's? that would be the ideal setup for 4 d4's. 2 1200's strapped at 2 ohms (each amp seeing 1 ohm). Quote Link to comment Share on other sites More sharing options...
john253a Posted July 1, 2013 Report Share Posted July 1, 2013 T-line on amp you have Quote Link to comment Share on other sites More sharing options...
N9neMillahhh Posted July 7, 2013 Report Share Posted July 7, 2013 You need the MLX100 to link any of the BRZs except the 2400, that one can be linked without the MLX100, I looked into this for two HDC310s or a pair of Zv410s with two BRX2000s but they said the 2400 models are the only ones that don't need the MLX100 to strap/link em. I'm not sure where to even find the MLX100. Quote 02 Lexus IS300 (2JZ FTW) Mids/Highs: JL Audio C5 6.5s all around Mids/Highs Amp: JL Audio HD 600/4 Subs: four SA-8v2s in 3.8cubes @ 32hz Sub Amps: SAZ3k Battery: Huge Interstate Batteries relocated to trunk About 80ft. of 1/0 OFC.... Head Unit: Pioneer 4200NEX Link to comment Share on other sites More sharing options...
N9neMillahhh Posted July 7, 2013 Report Share Posted July 7, 2013 T-line on amp you have That could be great, but a T-Line for (4) SA-8s would be pretty big right? I know you can make em small but for four of em? Quote 02 Lexus IS300 (2JZ FTW) Mids/Highs: JL Audio C5 6.5s all around Mids/Highs Amp: JL Audio HD 600/4 Subs: four SA-8v2s in 3.8cubes @ 32hz Sub Amps: SAZ3k Battery: Huge Interstate Batteries relocated to trunk About 80ft. of 1/0 OFC.... Head Unit: Pioneer 4200NEX Link to comment Share on other sites More sharing options...
AI James Posted July 7, 2013 Report Share Posted July 7, 2013 i like 3 cubes, 35hz tuning, 15sq per of port area. was pretty linear. Quote Link to comment Share on other sites More sharing options...
N9neMillahhh Posted July 7, 2013 Report Share Posted July 7, 2013 That would work pretty well, I like lower tuning but I'm sure that'd still be a good ass box. I will have my Zv410 in a 1.5cuft @ 32 Hz with about 16sq per of port and 2000w. It's an L-Port but it's gonna be retarded loud. But that sounds like a good base to start off with for a T-Line design. I'd go with that as a starter then fine tune it to your wants. Quote 02 Lexus IS300 (2JZ FTW) Mids/Highs: JL Audio C5 6.5s all around Mids/Highs Amp: JL Audio HD 600/4 Subs: four SA-8v2s in 3.8cubes @ 32hz Sub Amps: SAZ3k Battery: Huge Interstate Batteries relocated to trunk About 80ft. of 1/0 OFC.... Head Unit: Pioneer 4200NEX Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.