mooresound Posted July 2, 2013 Report Share Posted July 2, 2013 So I stated and still working on my truck... Ivs had some JBL 804s and RSD 6.0's in there but now its time to step my game up. So here is the layout:SPEAKERS:FR89ex - in dash pods (pvc caps) on dash.SLS 6.5 - in door stock location, midbass dutiesSSa Icon 12 - Center console ported enclosure.AMPS:PPI BK210.2 - On the founteks 400hz and upPPI PC400.4 - Birdged on the midbassesAudiopipe AP1800.1D - @1 ohm on the Icon - - **Soon to be PPI BK 1300.1D to match)Enclosure:aprox two cubes @28-29hz4 inch aero portElectric:1/0 on the big threeXS Power D3400 in stock location.I posted this on another forum (DIYMA) but lurk on here a lot so wanted to get engaged with this forum as well.. Tell me what ya think. Im open to ideas.. and this will be ongoing...I spend money in spurts. This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3. This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3. Click this bar to view the full image. Click this bar to view the full image. This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3. http://i1275.photobucket.com/albums/y444/robert Link to comment Share on other sites More sharing options...
mooresound Posted July 2, 2013 Author Report Share Posted July 2, 2013 This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3. This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3. http://i1275.photobucket.com/albums/y444/robert Link to comment Share on other sites More sharing options...
mooresound Posted July 2, 2013 Author Report Share Posted July 2, 2013 This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3. This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3. This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3. This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3. This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3. This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3. This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3. http://i1275.photobucket.com/albums/y444/robert Link to comment Share on other sites More sharing options...
mooresound Posted July 2, 2013 Author Report Share Posted July 2, 2013 This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3. fitment: This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3. I also ran the wires for the Founteks and midbasses: This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3. This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3. This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3. This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3. Left some extra wire for positioning on the dash. This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3. Also tightened up my amp wiring. Lots of ziptyes: This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3. This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3. http://i1275.photobucket.com/albums/y444/robert Link to comment Share on other sites More sharing options...
mooresound Posted July 2, 2013 Author Report Share Posted July 2, 2013 This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3. The sub will be on the bottom, so my image is actually upside down...but... I will be adding wood to raise the box and provide clearance for excursion on an as needed basis during install. This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3. http://i1275.photobucket.com/albums/y444/robert Link to comment Share on other sites More sharing options...
mooresound Posted July 2, 2013 Author Report Share Posted July 2, 2013 This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3. This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3. -the d4700 is for the cobalt. 3400 for the truck. just swapping out the stock lead acid for the AGM. Altenator connection 1/0 This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3. Tied it right where the stock 4 gauge ran. This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3. Ground connection 1/0 This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3. The madness coming together: This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3. This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3. This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3. http://i1275.photobucket.com/albums/y444/robert Link to comment Share on other sites More sharing options...
mooresound Posted July 2, 2013 Author Report Share Posted July 2, 2013 Making template for SLS This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3. Painted the baffels with truck bed liner I had laying around. serves as some bit of h2o proofing. This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3. Got the door skin pulled off This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3. Made a CCF template to seal the door with This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3. At that same time, I got my order of CLD tiles from Don so I deadened the door. I went minimal in coverage as I am trying to keep the truck as stock as possible(IE no double dynamat doors sealed to umpteenth degree) This same philosophy can be seen in my door sealing technique. This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3. This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3. This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3. Added some CLD to the plastic panel as well This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3. And this is my sealed door. Please don't laugh, lol. Seriously I covered the CCF(floor padding for laminate floors) with Fat Mat, then velcro'd and taped it to the door. MAde a nice seal and is easily removable for repairs and such. all for like 10 bucks. This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3. the red tape is what I had lying around.and the final door This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3. http://i1275.photobucket.com/albums/y444/robert Link to comment Share on other sites More sharing options...
mooresound Posted July 2, 2013 Author Report Share Posted July 2, 2013 Used the CLD tiles with Fat mat as a secondary barrier, then CCF, then fat mat. This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3. This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3. This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3. Also got my box completed. I plan to get it upholstered to match, as well I don't have my icon yet. So I stick a T1 in it and put it in the truck. This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3. This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3. This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3. This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3. I builtup the rear to level it out and make a better armrest. it is now wife approved for driving, lol. This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3. Port faces the front around. Gives a nice breeze on the legs for the hot florida weather. This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3. Shot from the back seat. This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3. http://i1275.photobucket.com/albums/y444/robert Link to comment Share on other sites More sharing options...
mooresound Posted July 2, 2013 Author Report Share Posted July 2, 2013 some videosOne thing to note, a lot of sound is lost on the exterior as they are on axis in the truck. Also its on my phone. http://i1275.photobucket.com/albums/y444/robert Link to comment Share on other sites More sharing options...
mooresound Posted July 2, 2013 Author Report Share Posted July 2, 2013 Put split loom over all the wiring for a more stock look. Still need to get some smaller loom to finish it but much better looking. This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3. This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3. Also installed some cup holders I picked up at west marine. kind of match the interior coloring and very functional. This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3. Heat shrunk all my battery connections for safety as well as ran loom over the power wires I installed. This image has been resized. Click this bar to view the full image. The original image is sized %1%2 and weights %3. http://i1275.photobucket.com/albums/y444/robert Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.