Jump to content

wtb surfboard amps


nuboot

Recommended Posts

so i already saved up enough for my rebuild so now i am starting to collect some amps. so i started with 1000 for the month of july and i have 700 left to purchase surfboard amps. the only thing that i care about is that the amp is longer than 30in, number of channels and if it works or not doesnt matter. they will be setting on a shelf in my living room. as much as i would enjoy a ab1100.1 it doesnt fall into my budget want to buy amps that i can afford and still being able to buy more. aiming for 3 a month. 1 down 2 to go. let me know what you got. shipping zipcode will be 73507

HEADUNIT:Pioneer AVic d3

WIRING: 8 runs of 1/0 knu gnd and pwr

BATTERIES: 1 shuriken bt80 upfront 4 in the back

COMPONETS:powerbass 3xl in front dooors powerbass xl in back doors 6.5s

AMPS: 2 powerbass xa3000d powerbass Asa 400.4

SUBS: 4 db drive plw 15s

ENCLOSURE:12.7 cubes 32hz

ALT: 150a stock for now

VEHICLE:05 chevy trailblazer sitting on 24s

iTRADER FEED BACK http://www.caraudioclassifieds.org/forum/itrader.php?u=1289

Link to comment
Share on other sites

if you can get a quick measurement of it it would be greatly appreciated

HEADUNIT:Pioneer AVic d3

WIRING: 8 runs of 1/0 knu gnd and pwr

BATTERIES: 1 shuriken bt80 upfront 4 in the back

COMPONETS:powerbass 3xl in front dooors powerbass xl in back doors 6.5s

AMPS: 2 powerbass xa3000d powerbass Asa 400.4

SUBS: 4 db drive plw 15s

ENCLOSURE:12.7 cubes 32hz

ALT: 150a stock for now

VEHICLE:05 chevy trailblazer sitting on 24s

iTRADER FEED BACK http://www.caraudioclassifieds.org/forum/itrader.php?u=1289

Link to comment
Share on other sites

its a little to short for my collection,

HEADUNIT:Pioneer AVic d3

WIRING: 8 runs of 1/0 knu gnd and pwr

BATTERIES: 1 shuriken bt80 upfront 4 in the back

COMPONETS:powerbass 3xl in front dooors powerbass xl in back doors 6.5s

AMPS: 2 powerbass xa3000d powerbass Asa 400.4

SUBS: 4 db drive plw 15s

ENCLOSURE:12.7 cubes 32hz

ALT: 150a stock for now

VEHICLE:05 chevy trailblazer sitting on 24s

iTRADER FEED BACK http://www.caraudioclassifieds.org/forum/itrader.php?u=1289

Link to comment
Share on other sites

bump

HEADUNIT:Pioneer AVic d3

WIRING: 8 runs of 1/0 knu gnd and pwr

BATTERIES: 1 shuriken bt80 upfront 4 in the back

COMPONETS:powerbass 3xl in front dooors powerbass xl in back doors 6.5s

AMPS: 2 powerbass xa3000d powerbass Asa 400.4

SUBS: 4 db drive plw 15s

ENCLOSURE:12.7 cubes 32hz

ALT: 150a stock for now

VEHICLE:05 chevy trailblazer sitting on 24s

iTRADER FEED BACK http://www.caraudioclassifieds.org/forum/itrader.php?u=1289

Link to comment
Share on other sites

Soundstream XXX-10000D
Dimensions: 27" x 11.5" x 2.6"

7,998w RMS @ 1 Ohm 13.5v

5,834w RMS @ 2 Ohm 13.5v

4,140w RMS @ 4 Ohm 13.5v

8,245w RMS @ 1 Ohm 14.4v
6,014w RMS @ 2 Ohm 14.4v
4,268w RMS @ 4 Ohm 14.4v

8,500w RMS @ 1 Ohm 16.0v

6,200w RMS @ 2 Ohm 16.0v

4,400w RMS @ 4 Ohm 16.0v

$999.99 shipped

1994 Mazda RX7 with LS1 Swap and 2 - 10" Kicker L7's in Truck Boxes (because of extremely limited hatch space)

2003 GMC Yukon XL with 3 - 12" MTX 9500's and still has the third row seat (over 7.5 cu ft of enclosures behind third row)

1971 Chevrolet Nova with LS1 Swap (work in progress, most likely 4 - 12" Alpine Type R's as I already have them)

1961 Chevrolet Corvette Restomod with LS7 Swap (system upgrade will be one of the first things that I'll do)

Solo Basshead For The Most Part, None Of My Close Friends Have A Passion For It, Nor The Money For It. If I'm Home And Free... Always Looking To Meet Up With A Fellow Enthusiast To Talk Shop Or Do Demos! Hard To Find Fellow Bassheads (Not Crack or Heroin Addicts, I Can Find Them Everywhere) In Baltimore / Mid-Atlantic / DMV areas.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 241 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...