snafu Posted July 12, 2013 Report Share Posted July 12, 2013 Recently, I was hired to complete the electrical work in a gorgeous '65 'vette with a 600+hp LS3. My buddy Frank Beck, of Beck Racing Engines, built the engine. It came off the dyno with a MSD MEFI system (made by Delphi for Mercury Marine). The MEFI system has some pretty cool features and offers the ability to run multiple coil packs. The owner cut the EFI harness and tried to extend it on his own as he located the ECU in the area behind the passenger front wheel and wanted to keep it out of sight. I completely removed the harness, rebuilt it, lengthened it properly, and re-installed it. In addition, I wired the charging system, installed one of our Master Grounding Kits, reconfigured the stock wiring configuration for the charging system, completed the wiring to his relocated battery, wired his fuel pump, electric fan, electric water pump, and AFX O2 sensor modules. Finally, I tweaked the original design of the harness slightly for the relay center and added additional relays for the water pump and O2 sensor modules. We got it fired up over the weekend. It has open headers and let me tell you this thing is NASTY. Here are some pics. Unfortunately, I haven't taken any pics of the charging system stuff . . . YET! 1 Quote Tony Candela - SMD Sales & Marketing Email me at [email protected] to learn about becoming an SMD Partner! Link to comment Share on other sites More sharing options...
DTS909 Posted July 12, 2013 Report Share Posted July 12, 2013 Clean wiring. Quote VM-1 Pioneer DEH-80PRS Hertz HSK 165XL Arc Audio KS 300.2 Linear Power 1002 Full Mods Fi Audio Q 10s Sundown Audio Scv 3000 Big 3 XS Power D5100 Juice Box 20AH Singer Alternator Sky High Wire <p>My Ebay feedback. http://feedback.ebay...tab=AllFeedback Link to comment Share on other sites More sharing options...
Kyblack76 Posted July 12, 2013 Report Share Posted July 12, 2013 Sick TC. MOR PICS and a vid of the HEADERS wide plez?!! Quote SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
carfreac18 Posted July 12, 2013 Report Share Posted July 12, 2013 This is absolutely beautiful.. I love 'Vettes Quote 1998 Mustang GT Yellow 5-Speed Manual, Cold-Air Intake, saving up for 4.10 gears in the rear-end. (1) 12" RE Audio SRx and a ported box tuned to about 36 Hz. (4) Memphis Audio 15-PR572V2 Coaxials (1) Set of Rockford Fosgate Punch P1T-S tweeters Link to comment Share on other sites More sharing options...
ZAPCO209 Posted July 12, 2013 Report Share Posted July 12, 2013 Beast! Quote THE DRIVING FORCE Link to comment Share on other sites More sharing options...
Audio Customs Posted July 12, 2013 Report Share Posted July 12, 2013 Recently, I was hired to complete the electrical work in a gorgeous '65 'vette with a 600+hp LS3. My buddy Frank Beck, of Beck Racing Engines, built the engine. It came off the dyno with a MSD MEFI system (made by Delphi for Mercury Marine). The MEFI system has some pretty cool features and offers the ability to run multiple coil packs. The owner cut the EFI harness and tried to extend it on his own as he located the ECU in the area behind the passenger front wheel and wanted to keep it out of sight. I completely removed the harness, rebuilt it, lengthened it properly, and re-installed it. In addition, I wired the charging system, installed one of our Master Grounding Kits, reconfigured the stock wiring configuration for the charging system, completed the wiring to his relocated battery, wired his fuel pump, electric fan, electric water pump, and AFX O2 sensor modules. Finally, I tweaked the original design of the harness slightly for the relay center and added additional relays for the water pump and O2 sensor modules. We got it fired up over the weekend. It has open headers and let me tell you this thing is NASTY. Here are some pics. Unfortunately, I haven't taken any pics of the charging system stuff . . . YET! Quote cone area http://www.stevemeadedesigns.com/board/topic/6819-cone-area-of-a-subwoofer/ 4th order band pass basic http://www.stevemeadedesigns.com/board/topic/126478-basics-of-a-4th-order-bandpass-enclosure/ this is Torres box calculator My GUI Box Tuning Calculator Download - Updated 8/18/2012 Link to comment Share on other sites More sharing options...
boom50cal Posted July 12, 2013 Report Share Posted July 12, 2013 Only thing that would make it cooler is a big arse GT42R Sweet ride, jealous of you Tony! Quote On 1/4/2013 at 9:31 PM, HatersGonnaHate said: Wow. 184 posts and I think you're a fucking asshole. Link to comment Share on other sites More sharing options...
meade916 Posted July 12, 2013 Report Share Posted July 12, 2013 always love your wiring. It's good to know you don't just sell the shit, you also know your shit and have major skills. Keep the pics coming, i could look at wiring jobs like that all day 1 Quote All SMD products + MORE available at my store here! https://wccaraudio.com/ Subscribe to My Youtube Channel! Over 1,000,000 subscribers strong! Turn on your notifications! http://www.youtube.com/meade916 Follow My Instagram! Daily live feeds from the shop, exclusive content way before it hits my Youtube channel...and little squares with photo's in them http://www.instagram.com/meade916 The Official SMD Facebook fan Page https://www.facebook.com/SteveMeadeDesigns/ Follow my Tweet (Twitter) http://www.Twitter.com/meade916 Link to comment Share on other sites More sharing options...
Joe Mastermind Zippilli Posted July 12, 2013 Report Share Posted July 12, 2013 Wow very very nice! Quote Link to comment Share on other sites More sharing options...
Smoove Posted July 12, 2013 Report Share Posted July 12, 2013 Nice. I'm glad I got to see it mid process. Makes it even that much cleaner. Whats the next project? Quote 2 Team Fi 15's v1 2 DD M5's 970amps of Alt 6th order blowthroughThe truck Blowthrough build : http://www.stevemeadedesigns.com/board/topic/155555-smooves-1996-chevy-ext-cab-c1500-slow-build/The 350z build : http://www.stevemeadedesigns.com/board/topic/170694-smooves-2003-nissan-350z/ My FB page https://www.facebook.com/pages/Smooves-Car-Audio-and-performance/719746144805343 Team Fi Audio http://www.ficaraudio.com/ Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.