MACnonsence6 Posted August 14, 2013 Report Share Posted August 14, 2013 i ordered recones for my se's the one i had reconed i had so many problems with the leads i gave up and bought new. it was due to my own fault i put them on to tight from the start after they broke its been constant trying to repair them getting them right its always been to loose with stupid amounts of lead slap or to tight then they break. so i bought new recones gona sew these leads on. my question is the coil for the se is still nice and shinny copper. its a flatwound 3" d4 2" wind width with 150ft of coil. thinking about when i cut out the recone cutting the spider and the cone just enough so that someone could still use the coil would prolly ask 30 shipped what do you guys think? I picked up an MTX Sw1212 powered subwoofer today. This thing sounds amazing. 130 watts, 12" woofer with a passive 12" woofer tuned to 27 hz. Moving the pictures on the walls and my girl got wet from the bass when i showed her haha. Tonight should be good haha. Link to comment Share on other sites More sharing options...
SnowDrifter Posted August 14, 2013 Report Share Posted August 14, 2013 Not worth trying to sell a used coil IMO They are $30 brand new ~~~~~~~~SAY NO TO PHOTOBUCKET~~~~~~~~ Snow's DD-1 tracks here: https://www.stevemeadedesigns.com/board/topic/167433-snows-dd-1-tracks/ My take on OFC vs CCA: https://www.stevemeadedesigns.com/board/topic/110381-things-that-piss-you-off-in-the-car-audio-world/?do=findComment&comment=2461444 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.