4th order blowthough 13 ridgeline **with pics finally*

[detroitdb]

So I got rid of the H3. I Bought a brand new 2013 Ridgeline (Honda). I was wondering if you guys have any opinions on a 4th order blow through. My plans so far are this. Port will be 8 3/4 x 11 1/4 8 total inches coming through the armrest area into from the bed of truck. The sealed portion will be 3cubes. 49.25 w x 18.75 h x 8 deep. The ported portion will be 49.25w x 18.75 h x 14.5 d . I was wondering if I should make any changes to the port depth at all. Or just any input whatsoever. The subwoofer will be a Atomic APX 18" D2.

thank you all, And I welcome all comments.

So this is my work in progress,

the truck

[detroitdb]

Bump, really would like your guys input.

[detroitdb]

So what do you guys think?

[detroitdb]

bump <>

[corona_jeff]

I can tell you now you won't be able to cut out as much as you thing I'm the back wall.. The window motor and and rear supports are in the way.

[corona_jeff]

http://www.stevemeadedesigns.com/board/topic/73501-2006-honda-ridgeline-6th-order-4-dd-1508s-4-9-2010-video/page-5?hl=%2Bhonda+%2Bridgeline#entry1033296

http://www.stevemeadedesigns.com/board/topic/98814-dc-honda-ridgeline-transformation-update-692011/?hl=%20honda%20%20ridgeline

http://www.stevemeadedesigns.com/board/topic/116368-honda-ridgeline-v3-rebuild/?hl=%20honda%20%20ridgeline

[detroitdb]

Yeah about that. Im gonna get maybe 11x8 gross for the port area. But I think I can make it work

[corona_jeff]

I was able to cut a 13.5 x 7 hole

[detroitdb]

I was able to cut a 13.5 x 7 hole

Right through the arm rest right? What kind of numbers were you getting with yours?

[detroitdb]

If I cut into the 2 seat braces on each side of the arm rest I was able to cut a 11.5 x 10 rectangle port. I will be posting pics as soon as I clean out my photo bucket folder.Also my head unit and Eq are installed. 2/0 installed from front to back under the car. I will be installing all batteries in the trunk area.