dylan117 Posted September 11, 2013 Report Share Posted September 11, 2013 so I did have a single level 3 15 running on 1200rms (hifonics brz1200) so a few days ago I got my 2nd one I put it in my L-ported box 6.2 cubes tuned @ 33hz and it really dosent seem much louder there both M2s getting around 600rms a piece (I know its underpowered) but still shouldn't 2 on lower power be louder than 1 on more power? ALSO the new level 3 has a more textured surround and the cone is more glossy looking and the older one (2 months older) had a more smooth surround and the cone is more dull colored? ONE last thing the new one seems to be moving a little more than the other ive double check the wiring and it seems right both wired @ 1 ohm (there dual 2s) but I have them hooked up on 2 sets of terminals (each one is wired sepratly) I think you guys can help anything is appreciated Quote Link to comment Share on other sites More sharing options...
stevog Posted September 11, 2013 Report Share Posted September 11, 2013 (edited) if there both dual 2s you can only wire at .5 ohm or 2 ohm. What do you mean by wired separately did you just stick the leads of each sub on the amp +- and +-? Edited September 11, 2013 by stevog 1 Quote Link to comment Share on other sites More sharing options...
Kyblack76 Posted September 11, 2013 Report Share Posted September 11, 2013 (edited) Your wired at 2ohms? NINJA Edited September 11, 2013 by KyLar96 Quote SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
dylan117 Posted September 11, 2013 Author Report Share Posted September 11, 2013 I might be but I have 2 sets of terminals coming from my box (4 actual connectors) for ex. ive got 1 wire leading to 1 set of box terminals and 1 set of wire leading to the other is that still 0.5 or 2 ohms im toataly lost here lol Quote Link to comment Share on other sites More sharing options...
CJ18 Posted September 11, 2013 Report Share Posted September 11, 2013 If one is moving more than the other, 1 is broken in and the new one isnt. You are also either wired to .5 ohm or 2 ohms. Oh and you arent seeing 1200w either. Quote Link to comment Share on other sites More sharing options...
Kyblack76 Posted September 11, 2013 Report Share Posted September 11, 2013 eeeeek... dont do anything, until you read more ... 2 Quote SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
dylan117 Posted September 11, 2013 Author Report Share Posted September 11, 2013 @ CJ that what I was thinking but what baffles me is the new one is actually a little LOSER than the old one I think (the new one is only 3-4 days old) Quote Link to comment Share on other sites More sharing options...
PlasticMind Posted September 11, 2013 Report Share Posted September 11, 2013 Yeah take a pic or draw up your wiring diagram. So ppl can understand what you have done. Quote Link to comment Share on other sites More sharing options...
dylan117 Posted September 11, 2013 Author Report Share Posted September 11, 2013 ive got the pic but how the hell do I attach it? Quote Link to comment Share on other sites More sharing options...
CJ18 Posted September 11, 2013 Report Share Posted September 11, 2013 Who did you order them through? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.