awall1022 Posted September 15, 2013 Report Share Posted September 15, 2013 I recently picked up a c10 that i will be doing a load of work on but first i would like to make a new dash but if worst case scenario arises i would like to put the original dash back in so im looking for some tips to make a fiberglass mold of the original dash to work off lifted trucks gorgeous sluts a pretty face and slammin bass My current Set up Car less I Do Ported Box designs/cutsheets with 3d google sketchup model just PM i would really want an in-depth guide Just flip the fucking thing over Link to comment Share on other sites More sharing options...
genesis Posted September 16, 2013 Report Share Posted September 16, 2013 I don't know if this will be of any help, but I believe lmc truck sells replacement dashes Link to comment Share on other sites More sharing options...
genesis Posted September 16, 2013 Report Share Posted September 16, 2013 Otherwise, id remove it, cover in foil and make your mold... Link to comment Share on other sites More sharing options...
awall1022 Posted September 22, 2013 Author Report Share Posted September 22, 2013 thanks trying to avoid having to buy more stuff for this truck as i just finished having the 350 built and interior is kinda being done on a budget lifted trucks gorgeous sluts a pretty face and slammin bass My current Set up Car less I Do Ported Box designs/cutsheets with 3d google sketchup model just PM i would really want an in-depth guide Just flip the fucking thing over Link to comment Share on other sites More sharing options...
2loud4uboyz Posted September 23, 2013 Report Share Posted September 23, 2013 Check The Timmy build thread. I believe he has a dash, that he done in it. Dude has skills on top of skills. Just trying to help. Dude good with fiber glass. His name should be Mr. Fiber glass. Link to comment Share on other sites More sharing options...
Pioneerchuck Posted September 23, 2013 Report Share Posted September 23, 2013 Are you trying to make an exact mold or a basic/general mold? Also making a dash is really tricky you might want to just bite the bullet and buy an aftermarket dash or go to a junkyard. Link to comment Share on other sites More sharing options...
JustinWillmon Posted September 27, 2013 Report Share Posted September 27, 2013 I have a c10 as we'll. for my dash I pulled it out and stripped all the vinyl and foam off. It'll give you a metal shelle to work with. Covered that in cloth and then fiber glasses it all. So now I have a fiberglass dash painted to match. Hope this helps Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.