subs getting hot. tuned with the dd-1.

[Jessica]

Did you use track 7 Again? I told you not to. Also where are you hooking the ground probe from the dd1?

[Noel989]

Why do you have an eq when you have a 80prs?

[ChevyBoy95]

you are clipping somewhere, i had 2 copper HDC3's on a 5k all day no issues.

[99blazer]

I had the eq before I bought the 80prs but I got rid of it now I am just running the 80prs. I used track 5 the compromise. I have tried track 3 but it just not loud at all. I hooked the probe up to the amp ground. I thought it was just the music at first but every single song clips at max undistorted volume which is 62 for me

[Kyblack76]

your asking for heat using the -15 track. Use -10 or -7.5

[99blazer]

your asking for heat using the -15 track. Use -10 or -7.5

I did use the -10 and its still clipping.

also at higher gains when setting the amp, the amp itself makes a buzzing noise.

Edited November 9, 2013 by 99blazer

[Kyblack76]

your asking for heat using the -15 track. Use -10 or -7.5

I did use the -10 and its still clipping.

also at higher gains when setting the amp, the amp itself makes a buzzing noise.

most do. The buzz, is about the time noise is made, and sets the dd1 off.

If your set clean, then your playing to far below, or above your enclosure tuning. Turn it down.

Just because your set with the dd1, dont mean your subs and box can play "lights down low" at full ape shit. Feel me?

[Kyblack76]

Also, whats hot?

Is it "fuck those are hot!"

or,.. they are getting hot.....

Do they get smelly?..

I dont know those drivers at all......

[Soccerballzs]

There is no receiver that will not let you go to full volume without clipping. 62 all the way.lol. try tuning with volume at 40.

[Kyblack76]

There is no receiver that will not let you go to full volume without clipping. 62 all the way.lol. try tuning with volume at 40.

Sorry bro. Mis info.

The 80prs does. As well as others. They are clean, to full....