Project D.G.A.F - the SMD Tercel - 4 15" LVL 5 Walled - 16v, DC Audio 9.0k's 18v EARLY SPL results pg 28 new Podium Page 33

[TRTC360]

I saw somethingggggg that others haven't seeeeennnnnn

[Shelby Cobra]

This should be good to see , i would like to see what this yota will do

[TRTC360]

he's holding out on us

[andygardner]

Dat baffle......

[meade916]

sorry guys i have been holding off on posting until i am happy with my design/approach. I have tried a few things but it is looking like a b-pillar wall with a very large driver side port. I will post pics and vids by the end of the week.

right now, to satisfy your curiosity, visit my instagram channel @

http://www.instagram.com/meade916

to see the latest teaser.

[BigManAC]

Those DC subs are sexy as hell. Especially now that they have the hydro graphics for those who run subs inverted.

or PLEXI WINDOWS. .. ;) LOL....hmmmm..... Dammmmmm niiiiceee cf caps....also.... :)

True, I didn't think about that. This car will just be a whole heap of sexy!!

[meade916]

Time to start cutting some wood.

Ok after i decided i didn't have room for the BandPass that i had in mind, i was considering doing it like THIS. Now one thing about these boxes is they are loud and make a ton of wind....BUT, nothing sucks worse then an extremely loud vehicle that only does a 152 when it sounds like a 159. Back to the drawing board.

I had to do the cardboard trick due to the bottom board being tapered along with the fender well.

Works good enough - its getting glassed over anyway.

These boards are barely fastened in place. I am just constructing it to make sure it is going to work and THEN i am going to make it permanent. So if you see gaps and such, that is ONLY because the boards are MOSTLY just leaning on each other at this point.

Lets do the ported B-Pillar wall with large driver-side port. Should still get LOUD and maybe do a "better" number then other configurations. MAYBE.

2 Layers of 3/4" and 2 Layers of 1". Then a 2x4 frame around everything. This will help separate the rear cone of the woofer as well as add rigidity. Plus it will give me a way to fasten my baffle to the rest of the wall.

[meade916]

Ok here we go - 16, 14" holes. This should be fun. LOL

This thing is a SOLDIER.

These boards are barely fastened in place. I am just constructing it to make sure it is going to work and THEN i am going to make it permanent. So if you see gaps and such, that is ONLY because the boards are MOSTLY just leaning on each other at this point.

Time to glue it all together and start the process of putting the wall pieces together for good.

[meade916]

After all of this dries, it will be ready to be placed back into the car.

[CleanSierra]

Holy frick! I'm diggin it. May need a UBL if you can get approval

Edit-Just saw the link below. Very ninja of you.

Edited November 5, 2013 by CleanSierra