revoracing247 Posted October 31, 2013 Report Share Posted October 31, 2013 hey sundown, i was in the process of trying to design a box for my X15 and i ran into a couple of road blocks. btw thanks a ton for posting the T/S parameters for the X series subs on your site recently it's really nice to have all those in one place now. not trying to be a dick but i think there's a couple missing though (at least i think, i could be blind) that are making it really hard to finish my design could you post the, Woofer Displacement Xmax Sd if those were there i'd be awesome. thanks, RevoRacing Quote I think you have a bit of truck stuck in your mud bro ~Ford Ranger, ext cabKenwood DDX4701/0ga stinger wiring for big 31/0ga ofc flextech wiring 3 kinetik 800's AQ2200 @1ohm Sundown Audio X15 in a 27Hz tuned ported box LE BUILD LOG!!! Link to comment Share on other sites More sharing options...
revoracing247 Posted November 1, 2013 Author Report Share Posted November 1, 2013 bump for info. im really just looking for sub displacement. would anyone know a close approximation maybe? Quote I think you have a bit of truck stuck in your mud bro ~Ford Ranger, ext cabKenwood DDX4701/0ga stinger wiring for big 31/0ga ofc flextech wiring 3 kinetik 800's AQ2200 @1ohm Sundown Audio X15 in a 27Hz tuned ported box LE BUILD LOG!!! Link to comment Share on other sites More sharing options...
TaylorFade Posted November 1, 2013 Report Share Posted November 1, 2013 I thought the xmax was 30mm? Do you really need Sd for the model? Approximate it. Should be in the neighborhood of 153sq in. Displacement... .25 should be close enough. Do you really need it down to the hundreth? Lol. Quote Link to comment Share on other sites More sharing options...
revoracing247 Posted November 1, 2013 Author Report Share Posted November 1, 2013 I thought the xmax was 30mm? Do you really need Sd for the model? Approximate it. Should be in the neighborhood of 153sq in. Displacement... .25 should be close enough. Do you really need it down to the hundreth? Lol. sd i don't need right now but it'll be important when i start designing my t-line. and i just thought because of the huge surrounds and stuff it might be a little different then most other subs. and for the displacement i wasn't sure. i tried this once calculator where i gave it the motor dimensions and stuff and it calculated like .45 so i wasn't sure what to trust. Quote I think you have a bit of truck stuck in your mud bro ~Ford Ranger, ext cabKenwood DDX4701/0ga stinger wiring for big 31/0ga ofc flextech wiring 3 kinetik 800's AQ2200 @1ohm Sundown Audio X15 in a 27Hz tuned ported box LE BUILD LOG!!! Link to comment Share on other sites More sharing options...
TaylorFade Posted November 1, 2013 Report Share Posted November 1, 2013 I thought the xmax was 30mm? Do you really need Sd for the model? Approximate it. Should be in the neighborhood of 153sq in. Displacement... .25 should be close enough. Do you really need it down to the hundreth? Lol. sd i don't need right now but it'll be important when i start designing my t-line. and i just thought because of the huge surrounds and stuff it might be a little different then most other subs. and for the displacement i wasn't sure. i tried this once calculator where i gave it the motor dimensions and stuff and it calculated like .45 so i wasn't sure what to trust. It's a custom tooled basket so as NOT to give up any Sd due to the comically large surround. The sub is actually closer to a 16" Quote Link to comment Share on other sites More sharing options...
Audio Customs Posted November 1, 2013 Report Share Posted November 1, 2013 sd is .18 Quote cone area http://www.stevemeadedesigns.com/board/topic/6819-cone-area-of-a-subwoofer/ 4th order band pass basic http://www.stevemeadedesigns.com/board/topic/126478-basics-of-a-4th-order-bandpass-enclosure/ this is Torres box calculator My GUI Box Tuning Calculator Download - Updated 8/18/2012 Link to comment Share on other sites More sharing options...
-X-RaTeD- Posted November 13, 2013 Report Share Posted November 13, 2013 (edited) I don't know if you got the info you needed, but this is from the pre-order thread from back in March: The X series is our 1250 RMS rated line -- they feature a 3" diameter CCAW round wire coil and our new frame, spider, surround, and cone platform. Linear x-max is around ~30mm one-way by 70% BL with a total mechanical clearance of 50mm in the motor. Edited November 13, 2013 by -X-RaTeD- Quote When I hear music, I fear no danger. I am invulnerable. I see no foe. I am related to the earliest times, and to the latest. ~Henry David Thoreau Link to comment Share on other sites More sharing options...
revoracing247 Posted November 15, 2013 Author Report Share Posted November 15, 2013 sd is .18 is that in m^2? and thanks i really need this for designing the t-line. I don't know if you got the info you needed, but this is from the pre-order thread from back in March: The X series is our 1250 RMS rated line -- they feature a 3" diameter CCAW round wire coil and our new frame, spider, surround, and cone platform. Linear x-max is around ~30mm one-way by 70% BL with a total mechanical clearance of 50mm in the motor. and thanks for finding this. they should just put these parameters on their site. Quote I think you have a bit of truck stuck in your mud bro ~Ford Ranger, ext cabKenwood DDX4701/0ga stinger wiring for big 31/0ga ofc flextech wiring 3 kinetik 800's AQ2200 @1ohm Sundown Audio X15 in a 27Hz tuned ported box LE BUILD LOG!!! Link to comment Share on other sites More sharing options...
Markous Posted February 28, 2014 Report Share Posted February 28, 2014 Still no sealed, ported or displacement measurements on the website? Quote '07 Ford Ranger - DM-608 I E700.4 I SA-CX6.5 v2 I SAZ-1500D 15th (x2) I Zv6 12" D1 I SB500-34 I JP40 I On 5/21/2015 at 7:07 PM, boom50cal said: of course he gives no fucks. it's a ford ranger. only bad mother fuckers drive ford rangers Link to comment Share on other sites More sharing options...
sundownz Posted February 28, 2014 Report Share Posted February 28, 2014 We have complete box designs posted up for them. Quote - Jacob Fuller - Owner, Sundown Audio - Sundown Audio on FACEBOOK - Please DO NOT PM ME -- use my email address -- [email protected] Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.