Markous Posted November 17, 2013 Report Posted November 17, 2013 Been messing around with Torres since i got my X-10 and SAZ-1200D to push it with. Building with 1" mdf and looking to tune it to 32hz, this is the design i keep coming up with as the best option for going into my ext. cab Ranger. What do you folks think? am i doing it right? any suggestions for improvement would be be appreciated. Quote '07 Ford Ranger - DM-608 I E700.4 I SA-CX6.5 v2 I SAZ-1500D 15th (x2) I Zv6 12" D1 I SB500-34 I JP40 I On 5/21/2015 at 7:07 PM, boom50cal said: of course he gives no fucks. it's a ford ranger. only bad mother fuckers drive ford rangers
alaskanzx5 Posted November 17, 2013 Report Posted November 17, 2013 What's the xmax on that sub? You have a lot port there.. Quote t1500bdcp 2 t2d4 15" 1 t600.4 1 t400.2 1 set p1 tweets singer alt, tons of wiring, smd vm-1, 80prs, back seat delete, still in the works, aiming for a 145-147 with the ability to play 25hz up to 50hz.
Markous Posted November 17, 2013 Author Report Posted November 17, 2013 30mm xmax @ 70% BL (not sure what that BL means) Quote '07 Ford Ranger - DM-608 I E700.4 I SA-CX6.5 v2 I SAZ-1500D 15th (x2) I Zv6 12" D1 I SB500-34 I JP40 I On 5/21/2015 at 7:07 PM, boom50cal said: of course he gives no fucks. it's a ford ranger. only bad mother fuckers drive ford rangers
alaskanzx5 Posted November 17, 2013 Report Posted November 17, 2013 I was just asking, I know a 12 with 19mm xmax need about 32" of port area and so it looked like a lot of port for a 10 but it has a lot of xmax on that 10 so it should be good. Quote t1500bdcp 2 t2d4 15" 1 t600.4 1 t400.2 1 set p1 tweets singer alt, tons of wiring, smd vm-1, 80prs, back seat delete, still in the works, aiming for a 145-147 with the ability to play 25hz up to 50hz.
Brandonbkd Posted November 17, 2013 Report Posted November 17, 2013 Also, what made you wanna use 1" mdf instead of 3/4"? 3/4" will be plenty strong Quote FI BL18 Build Log: CLICK HERE!! 2003 Explorer Sport: FI BL18 SoundQubed 2200 at 0.7ohm Pioneer DEH-2500UI Pioneer 6 x 8s Rockford Fosgate 6 x 9s 5 ft^3 box at 35hz Lots of Mega Mat
alaskanzx5 Posted November 17, 2013 Report Posted November 17, 2013 1" will have less flex and with 30mm xmax its gonna be moving. that and ive seen 1" mdf for close to the same cost as 3/4" Quote t1500bdcp 2 t2d4 15" 1 t600.4 1 t400.2 1 set p1 tweets singer alt, tons of wiring, smd vm-1, 80prs, back seat delete, still in the works, aiming for a 145-147 with the ability to play 25hz up to 50hz.
Jessica Posted November 17, 2013 Report Posted November 17, 2013 I am not sure about the port area myself. It might be ok, maybe email sundown and ask what they recomend for port area. Seeing that the port is so big it has to be super long to get the tuning you want. Here is kind of what you may be looking at when you build your box. This kind of thing happens when you run a small sub with low tuning and lots of port. Keep in mind this isn't the only way to do the port but it is just to show you kind of what you are getting into Quote Rest in peace, walled 87 accord build log 03' Corolla build with AA Mayhem inside. My super random youtube channel and terrible camera work. Wiring comparison by CaptainzPlanetz Wire and fuse guide by Guest SyKo13
alaskanzx5 Posted November 17, 2013 Report Posted November 17, 2013 pending vehicle port to the side maybe? Quote t1500bdcp 2 t2d4 15" 1 t600.4 1 t400.2 1 set p1 tweets singer alt, tons of wiring, smd vm-1, 80prs, back seat delete, still in the works, aiming for a 145-147 with the ability to play 25hz up to 50hz.
Jessica Posted November 17, 2013 Report Posted November 17, 2013 pending vehicle port to the side maybe? he could just run the port all the way across the back and still port back, it will only be two bends that way. I just like to keep my port all on one side. Give me a sec and i wil draw that up. Quote Rest in peace, walled 87 accord build log 03' Corolla build with AA Mayhem inside. My super random youtube channel and terrible camera work. Wiring comparison by CaptainzPlanetz Wire and fuse guide by Guest SyKo13
Markous Posted November 17, 2013 Author Report Posted November 17, 2013 (edited) double post Edited November 17, 2013 by Markous Quote '07 Ford Ranger - DM-608 I E700.4 I SA-CX6.5 v2 I SAZ-1500D 15th (x2) I Zv6 12" D1 I SB500-34 I JP40 I On 5/21/2015 at 7:07 PM, boom50cal said: of course he gives no fucks. it's a ford ranger. only bad mother fuckers drive ford rangers
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.