new plan thanks to Ram Designs.

[mgameforever01]

I have the 2 lvl 5 12s I have a box design wondering if is good enough will do no harm. These will be ran off a CT Sounds 7k. in a 2012 ford fusion trunk.

box is 39L x 16High x 19deep. (inches) tuned to 32hz, the volume of enclosure is 3.40cubicft.

port is 4in wide, 14.5 tall, 38.42 long.

will have a double baffle, 45's in corner and a bracing wall on in side.

any input would be appreciated.

Edited December 20, 2013 by mgameforever01

[Noel989]

Did you take the 45s bracing etc into consideration?

Is the3.4 cubic with our without bracing etc?

[mgameforever01]

sorry its 3.4 after all the 45s and bracing, and sub displacement.

[Tarball]

sorry its 3.4 after all the 45s and bracing, and sub displacement.

did you also subtract for the port ?

[mgameforever01]

yep also the air velocity is just over 27. so should be no port noise if everything is correct...this was also done with .75 thick mdf wood.

[mgameforever01]

any other things I may of forgot? or is this on the correct track?

[Sergeant_Skyrim]

Just make sure the way it's designed the motors won't be choking the air flow on the inside of the box. Can't remember who it was but somebody was saying they made that mistake when they did theirs. Ended up crumpling the cone or something like that. Basically make sure there's enough space around the motors for air to flow and you should be good if everything else checks out

[mgameforever01]

so i decided to just go to Ram Designs and get a custom design, double baffle and the flush look. so im gonna scrap my other design for this and will be tuned for 33hz. I will paint it black with a green port or white idk yet. so thanks to Ryan for this design.

[corona_jeff]

Box is too big

[n8ball2013]

Doh