Jump to content

Recommended Posts

ok, so this is going to be a real slow build with no real progress until sometime next summer (hopefully June). going through a lot of changes at the moment with a whole lot going on.

anyways list of equipment I already have

(2) t2d415 (in storage different state)

(2) punch pro 6.5 (installed)

(2) punch pro tweets (installed)

(1) t400.4 (installed)

(1) pioneer 80prs (installed)

(1) t1500.1bdcp (in storage different state)

(1) 10 farad Rockford cap (installed) ( yeah ive heard about caps, personal exp it has helped slightly with keeping voltage up)

enough Rockford 0/1 gauge to do 2 runs and big 3 (1 run installed no big 3 on this car yet)

plenty of 16gauge for the doors (installed)

should have enough 4gauge for the amps

singer 250 amp alt ( currently sent back for repair and external regulator setup )

fuse holders/fuses

hx2 power 12" for a temp setup im going to hopefully have a box for it and installed soon.

things I still need

batteries ( for sure either platinum diehard or kinetic for cheaper price but proven performance)

either t2 or t3 component set

2nd t400.4

2nd t1500.1bdcp

smd volt meter

material for fiberglassing

wood, nail gun, wood glue, liquid nails ( in general box building tools, materials )

8gauge for speaker wire

lots of sound deadener

not a whole lot on that list some spendy items that will take time to get but it shall be done.. sooner or later...

the plan is to do an all Rockford build with decent sq and great output. not building for the meter but if I can get up to a 148 I would be especially happy. going more for my personal enjoyment and dedication to a great hobby.

performance build

what i have (installed)

aem cold air intake

aftermarket exhaust manifold

2.5"? (looks last owner did it im gonna make changes) exhaust from manifold back

tein lowing springs

rear sway bar (looks kinda like an eibach but don't know, aftermarket for sure though.

light weight pulleys ( going to put a stock crank pulley back on because of the harmonic balancer )

what to get

kyb adjustable shocks and struts

all new bushing through out the suspension

engine and tranny mounts

clutch/fly wheel

minor head work maybe raise compression a bit

tune

appereance

cant remember the name of the stuff right now but that paint that peels right off when you want to change colors...

hid fog lights

hid headlights ( have but not on this car yet )

carbon fiber hood (installed needs touch ups)

carbon fiber hatchdoor ?maybe?

tinted windows

18" enkie wheels (installed)

ill have to use my phone to add pics give me sometime for pics. for some reason i cant paste to this forum, works with everything else on my computer just not this forum.

t1500bdcp

2 t2d4 15"

1 t600.4

1 t400.2

1 set p1 tweets

singer alt, tons of wiring, smd vm-1, 80prs, back seat delete, still in the works, aiming for a 145-147 with the ability to play 25hz up to 50hz.

Link to comment
Share on other sites

  • Replies 28
  • Created
  • Last Reply

2013-05-22193420_zps9b58a185.jpg

2013-12-08145931_zps2ab976b5.jpg

2013-12-08152743_zps6fa1e74a.jpg

Had a single t2d415, stock electrical and no sound deadener at this comp and.around a 142.3, could have been much better IMO. Voltage drop like crazy and sub and port was fitting back, I've had better luck firing up.

2013-07-06%2013.14.19_zpsdc4vwokv.jpg

2013-05-12%2020.54.57_zpsr1otxeoj.jpg

2013-02-26%2002.12.37_zps1nizfo2s.jpg

2012-09-05%2019.27.39_zpsioa73ug7.jpg

t1500bdcp

2 t2d4 15"

1 t600.4

1 t400.2

1 set p1 tweets

singer alt, tons of wiring, smd vm-1, 80prs, back seat delete, still in the works, aiming for a 145-147 with the ability to play 25hz up to 50hz.

Link to comment
Share on other sites

And this is the planned box for the 2 t2d415, will be a tight fit but I'll make it work.

[int]http://i1229.photobucket.com/albums/ee475/alaskanzx5/t2d41526inchports_zpsca15b6d3.png[/img]

t2d415sketch_zpsb79c43c8.png

I'm going to use pvc but I will flare it and i'm going to sand and paint the inside of the box ti make it nice and smooth. Not set on that coloring but it should be something along those lines.

Just noticed, in the sketch up the height measurement doesn't include the double baffle.

t1500bdcp

2 t2d4 15"

1 t600.4

1 t400.2

1 set p1 tweets

singer alt, tons of wiring, smd vm-1, 80prs, back seat delete, still in the works, aiming for a 145-147 with the ability to play 25hz up to 50hz.

Link to comment
Share on other sites

472311_378176212216979_100000738091815_1

552718_384203748280892_100000738091815_1

Don't like the projectors.on the headlights very much so i'm thinking of doing a retro fit.

t1500bdcp

2 t2d4 15"

1 t600.4

1 t400.2

1 set p1 tweets

singer alt, tons of wiring, smd vm-1, 80prs, back seat delete, still in the works, aiming for a 145-147 with the ability to play 25hz up to 50hz.

Link to comment
Share on other sites

Link to comment
Share on other sites

Ive got some changes coming next summer also. Mostly a front stage change but i am planning on sealing the box of better also. And i have one of those diehard batteries. The g34. That with my 130 amp alt i dont drop below 13v when reved to ~2000 rpm.build looks good. Are you back in alaska?

Link to comment
Share on other sites

The box will be a pain to fit and get the trim pieces back on, not to mention the back seat latching in place. Had a box at the same height and depth before but 38"wide, it took work to get it all in and the trim pieces back in place. I'll make it work though.

I'm still in Michigan, there id a chance that I might go back to Alaska next summer. Not sure right now, or should I say the wife isn't sure...

t1500bdcp

2 t2d4 15"

1 t600.4

1 t400.2

1 set p1 tweets

singer alt, tons of wiring, smd vm-1, 80prs, back seat delete, still in the works, aiming for a 145-147 with the ability to play 25hz up to 50hz.

Link to comment
Share on other sites

Box for the hx2 12 i'm going to use temporarily.

designed by cleansierra

hx212boxcutsheet_zps7594f1b9.png

t1500bdcp

2 t2d4 15"

1 t600.4

1 t400.2

1 set p1 tweets

singer alt, tons of wiring, smd vm-1, 80prs, back seat delete, still in the works, aiming for a 145-147 with the ability to play 25hz up to 50hz.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 329 Guests (See full list)

    • There are no registered users currently online



×
×
  • Create New...