JaynCarla Reber Posted January 27, 2014 Report Share Posted January 27, 2014 i received this amp a few months ago and tried to get it to work, powers up (lights up) but not sure on troubleshooting, i know my wiring is good bc my other amp works... thanks in advance Link to comment Share on other sites More sharing options...
jarrius Posted January 30, 2014 Report Share Posted January 30, 2014 Whats the amp not doing? 2012 Chevy sonic1xSQ HDC3 12 D2RF R1200d 140 square foot of Q-Mat(soon to be installed) 140.2Db sealed on the dash with TL 142 DB sealed on the dash with another meter (was dead on with the TL at a show i was at) 141 on music. strangeduck,on 02 Jan 2014 - 01:39 AM, said: when my car spins out i just put the car in neutral, turn in the direction i want to go and pucker my asshole Link to comment Share on other sites More sharing options...
JaynCarla Reber Posted February 13, 2014 Author Report Share Posted February 13, 2014 sorry for the delay i powers on (fuse on amp is good, power lights up no protection) nothing comes out (audio) but other amp works with no problems im just hoping its not fried Link to comment Share on other sites More sharing options...
Kranny Posted February 13, 2014 Report Share Posted February 13, 2014 did you swap rca's Link to comment Share on other sites More sharing options...
Skullz Posted February 13, 2014 Report Share Posted February 13, 2014 Push on the buttons and see if sound comes out. Try the xover button, input -12db button to see if anything happens, i have the sound go out on me while driving going around a corner once and checked them and found one pushed in, so make sure to check them out. http://www.precisionpower.com/Manuals/Amplifier%20Manuals/Precision_Power_PC%20Series%202100,%202200%20&%202300%20Amplifiers%20(1999).pdf 01 Ford focus ZX3 Pioneer AVH-X491BHS PPI PC 4800.2 Morel Maximo 6.5" x2 Link to comment Share on other sites More sharing options...
JaynCarla Reber Posted February 14, 2014 Author Report Share Posted February 14, 2014 i looked at the manual, not much for troubleshooting lol Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.