the808path Posted March 25, 2014 Report Share Posted March 25, 2014 Got some nice new 1/0 for my new engine bay wire runs, made a couple grounds and a new alternator run... i also just ordered 25ft of 3/4" techflex to clean up the wiring in the engine bay.. it is currently wire loomed but i really like the techflex look on wiring in the engine bay so that should be here tomorrow/wednesday. Also, after i put my exhaust on i realized how weak the factory exhaust hangers were. exhaust would shake on startup and rattle if i hit a bump...so i ordered up some torque solution exhaust hangers(5) and got those installed really quick this weekend, made a huge difference... can barely make the exhaust move or shake by hand now, so it no longer hits the bottom of the car anymore Yea those stock hangers sucks ass. When I installed my exhaust thats the first thing I noticed, so that had to go and i got some torque hangers too. 2010 Pathfinder Sundown Audio - SAZ 4500- Zv.3 15"x 2 w/ Nightshade coils Sundown Audio - SAX 100.4d- Focal Utopias 165w2 (fronts), rockford t1652 (rears) DC Power Engineering - 270XP Knukonceptz and Rockford 1/0 wire through out XS Power D3100s x2 and a "god ol" Optima Yellow Top up front Link to comment Share on other sites More sharing options...
BeAlLsTaR13 Posted March 26, 2014 Author Report Share Posted March 26, 2014 yeah the stock hangers are awful with any aftermarket exhaust, it got so irritating lol, took me 5 mins to swap em out so it wasnt bad, i just cut them off and slid the new ones on Team Sundown Audio**CURRENT** -- 2012 Scion tC Build Click Here **OLD** -- 2002 Pontiac Grand AM Build Click Herecheck them out, slap me a comment2002 Pontiac Grand AM SE 2.2l 4 cylinder ecotec.-------------------------------------------------------------------Head Unit - Alpine CDA-9887Subs - 2x Z 12 v.2s - v.3 + NS Soft partsAmplifier - Sundown Audio SAZ-3500DEnclosure - 3.33 Cubes tuned to 34.66hzFront Stage - JBL P660c 6.5" ComponentsRear Deck - Powerbass 4xl 6.5" Mid-RangeFront Stage Amplifier - Sundown Audio SAX-100.4DWires - Kicker Hyperflex 1/0, KnuKonceptz 1/0, Knu 4 and 8 Gauge, Kicker RCAsElectrical - 275 AMP DC Power H/O Alternator, XS Power S3400, XS Power D2700Videos - http://www.youtube.com/user/BeAILsTaR13------------------------------------------------------------------- Link to comment Share on other sites More sharing options...
K_SubieXT Posted March 26, 2014 Report Share Posted March 26, 2014 Tuned in, looks like this whole thing will turn out clean My 95 Jeep Cherokee Build: http://www.stevemeadedesigns.com/board/topic/157643-1995-jeep-cherokee-build-sub-is-in-and-playing/ Link to comment Share on other sites More sharing options...
BeAlLsTaR13 Posted March 27, 2014 Author Report Share Posted March 27, 2014 Tuned in, looks like this whole thing will turn out clean thats the goal lol Team Sundown Audio**CURRENT** -- 2012 Scion tC Build Click Here **OLD** -- 2002 Pontiac Grand AM Build Click Herecheck them out, slap me a comment2002 Pontiac Grand AM SE 2.2l 4 cylinder ecotec.-------------------------------------------------------------------Head Unit - Alpine CDA-9887Subs - 2x Z 12 v.2s - v.3 + NS Soft partsAmplifier - Sundown Audio SAZ-3500DEnclosure - 3.33 Cubes tuned to 34.66hzFront Stage - JBL P660c 6.5" ComponentsRear Deck - Powerbass 4xl 6.5" Mid-RangeFront Stage Amplifier - Sundown Audio SAX-100.4DWires - Kicker Hyperflex 1/0, KnuKonceptz 1/0, Knu 4 and 8 Gauge, Kicker RCAsElectrical - 275 AMP DC Power H/O Alternator, XS Power S3400, XS Power D2700Videos - http://www.youtube.com/user/BeAILsTaR13------------------------------------------------------------------- Link to comment Share on other sites More sharing options...
BeAlLsTaR13 Posted March 27, 2014 Author Report Share Posted March 27, 2014 techflex came in today, so i was able to loom my grounds and my new alternator positive run with it couldnt find my zipties anywhere so when i grab some i'll be able to get everything where i need it to, but the techflex looks pretty good IMO and my over-all dirty ass engine bay.. cant wait till spring actually gets here so i can get everything all cleaned up Team Sundown Audio**CURRENT** -- 2012 Scion tC Build Click Here **OLD** -- 2002 Pontiac Grand AM Build Click Herecheck them out, slap me a comment2002 Pontiac Grand AM SE 2.2l 4 cylinder ecotec.-------------------------------------------------------------------Head Unit - Alpine CDA-9887Subs - 2x Z 12 v.2s - v.3 + NS Soft partsAmplifier - Sundown Audio SAZ-3500DEnclosure - 3.33 Cubes tuned to 34.66hzFront Stage - JBL P660c 6.5" ComponentsRear Deck - Powerbass 4xl 6.5" Mid-RangeFront Stage Amplifier - Sundown Audio SAX-100.4DWires - Kicker Hyperflex 1/0, KnuKonceptz 1/0, Knu 4 and 8 Gauge, Kicker RCAsElectrical - 275 AMP DC Power H/O Alternator, XS Power S3400, XS Power D2700Videos - http://www.youtube.com/user/BeAILsTaR13------------------------------------------------------------------- Link to comment Share on other sites More sharing options...
BeAlLsTaR13 Posted March 27, 2014 Author Report Share Posted March 27, 2014 got bored and finally decided to work more on my dash panel, i have a total of 2 more dash pieces i have to body work and get done that one runs along the top of my glove box, it was the same texture as my radio bezel originally was still un-decided on how i plan to finish this, whether it be paint, vinyl, or hydrodip Team Sundown Audio**CURRENT** -- 2012 Scion tC Build Click Here **OLD** -- 2002 Pontiac Grand AM Build Click Herecheck them out, slap me a comment2002 Pontiac Grand AM SE 2.2l 4 cylinder ecotec.-------------------------------------------------------------------Head Unit - Alpine CDA-9887Subs - 2x Z 12 v.2s - v.3 + NS Soft partsAmplifier - Sundown Audio SAZ-3500DEnclosure - 3.33 Cubes tuned to 34.66hzFront Stage - JBL P660c 6.5" ComponentsRear Deck - Powerbass 4xl 6.5" Mid-RangeFront Stage Amplifier - Sundown Audio SAX-100.4DWires - Kicker Hyperflex 1/0, KnuKonceptz 1/0, Knu 4 and 8 Gauge, Kicker RCAsElectrical - 275 AMP DC Power H/O Alternator, XS Power S3400, XS Power D2700Videos - http://www.youtube.com/user/BeAILsTaR13------------------------------------------------------------------- Link to comment Share on other sites More sharing options...
BeAlLsTaR13 Posted April 3, 2014 Author Report Share Posted April 3, 2014 alright so now finally finished with all 3 of the dash panels i had to do.. all primered and wet sanded up to 1500grit, so smooth its great now just to decide what color to go with.. hmm... Team Sundown Audio**CURRENT** -- 2012 Scion tC Build Click Here **OLD** -- 2002 Pontiac Grand AM Build Click Herecheck them out, slap me a comment2002 Pontiac Grand AM SE 2.2l 4 cylinder ecotec.-------------------------------------------------------------------Head Unit - Alpine CDA-9887Subs - 2x Z 12 v.2s - v.3 + NS Soft partsAmplifier - Sundown Audio SAZ-3500DEnclosure - 3.33 Cubes tuned to 34.66hzFront Stage - JBL P660c 6.5" ComponentsRear Deck - Powerbass 4xl 6.5" Mid-RangeFront Stage Amplifier - Sundown Audio SAX-100.4DWires - Kicker Hyperflex 1/0, KnuKonceptz 1/0, Knu 4 and 8 Gauge, Kicker RCAsElectrical - 275 AMP DC Power H/O Alternator, XS Power S3400, XS Power D2700Videos - http://www.youtube.com/user/BeAILsTaR13------------------------------------------------------------------- Link to comment Share on other sites More sharing options...
BeAlLsTaR13 Posted April 7, 2014 Author Report Share Posted April 7, 2014 Finally had time to start cutting some wood this weekend. Went to lowe's and got a full sheet of MDF, and have some left over.. Box will be 2.65 cubes @ 30-31hz or so has 3 baffles, including a flush mount so the sub will have 2 full layers to get screwed to.. not sure if i just wanna flush mount the sub... or do some sort of design on the top baffle... i havnt decided yet hoping to have the box fully assembled by thursday.. that way i can spend my day off finishing it, cutting the holes.. and work on trying to get it wrapped Also got this big ass box in the mail.. any guesses? Team Sundown Audio**CURRENT** -- 2012 Scion tC Build Click Here **OLD** -- 2002 Pontiac Grand AM Build Click Herecheck them out, slap me a comment2002 Pontiac Grand AM SE 2.2l 4 cylinder ecotec.-------------------------------------------------------------------Head Unit - Alpine CDA-9887Subs - 2x Z 12 v.2s - v.3 + NS Soft partsAmplifier - Sundown Audio SAZ-3500DEnclosure - 3.33 Cubes tuned to 34.66hzFront Stage - JBL P660c 6.5" ComponentsRear Deck - Powerbass 4xl 6.5" Mid-RangeFront Stage Amplifier - Sundown Audio SAX-100.4DWires - Kicker Hyperflex 1/0, KnuKonceptz 1/0, Knu 4 and 8 Gauge, Kicker RCAsElectrical - 275 AMP DC Power H/O Alternator, XS Power S3400, XS Power D2700Videos - http://www.youtube.com/user/BeAILsTaR13------------------------------------------------------------------- Link to comment Share on other sites More sharing options...
the808path Posted April 7, 2014 Report Share Posted April 7, 2014 Front lip? side skirts? lol 2010 Pathfinder Sundown Audio - SAZ 4500- Zv.3 15"x 2 w/ Nightshade coils Sundown Audio - SAX 100.4d- Focal Utopias 165w2 (fronts), rockford t1652 (rears) DC Power Engineering - 270XP Knukonceptz and Rockford 1/0 wire through out XS Power D3100s x2 and a "god ol" Optima Yellow Top up front Link to comment Share on other sites More sharing options...
Crandis16 Posted April 7, 2014 Report Share Posted April 7, 2014 looking good you have any pics of the hazard switch relocation? or are you ditching hazards? looking good on performance too. I can't wait to get a full exhaust for my car My Red zx2 Build Log My Black zx2 Build Log My Red zx2 UBL Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.