Jump to content
Sundown Audio

I need honest input on my system


Recommended Posts

I am planning on a wall with two Nightshade V3 18's. I already have my NS -1 V2. This is going in a 09 Chevy 2500HD so for batteries I'm running two XS D 4800's under the hood and planning on one XS D3100 in cab. Talked to Singer and probably running a 320A 6 phase. This is gonna be a daily driver and will prolly never compete so I am wondering if this will be enough electrical to run the NS-1 at 1 ohm. Also I have been advised to run the box at 16 cubes at 40hz. Thanks for any advice or input.

2009 Chevy 2500HD Crew Cab

Current Set up -

Headunit - JVC 6100BT

Mids/Highs - Sundown SA-6.5 CS x2

- 4 Crescendo pwx6.5's

- 2 Crescendo ft1's

Mids/Highs amps - 2 Sundown SAX100.4 V2

Sub amp - NS-1 V2

Alts - 2 Singer 320a 6 Phase

2 XS D4800 under the hood

2 XS D3100's in back

2 Sundown Team 18's walled

Link to comment
Share on other sites

I would add another D3100 and drop that tuning if it is for daily.

Who would suggest 40hz tuning for a DD? I would do ~35hz

29408240963_9908a51930_o.png
Best Score to Date : 160.5 dB Outlaw (47Hz)[4 XM 15's & 2 Taramps Bass 12k's]

BL :  http://www.stevemeadedesigns.com/board/topic/147800-chevyboy95s-4-15s-7krms-wall-1533-db-on-half-power/
YouTube: http://www.youtube.com/hitemwiththeflex/

Link to comment
Share on other sites

That box is big, tuning is high, and id want more electrical.

On 5/8/2011 at 7:38 PM, Kranny said:
On 5/8/2011 at 7:35 PM, 'Maxim' said:

It hurts me inside when I read stuff like this and remember you're 15

LMFAO so true

:blush:

Mitsubishi 3000GT (Old Build)

Headunit: Pioneer 80PRS

Frontstage: (2) McLaren Audio MLT-2 Tweeters & (4) PRV Audio MR Series Neo 6.5" Mids

Substage: 4 15" Hybrid Subs - Tantric Motors & Sundown Softies

Amps: Banda 2.4D Amp (Tweets), American Bass VFL 350.4 (Mids), and (2) Ampere 3800s

Electrical :Singer 260A Alt & JY Power Lithium

 

2005 Chevy Colorado Ext Cab

Headunit: Pioneer 80PRS

Frontstage: 4 PRV 700Ti Tweets & 6 10" Delta Mids on 3000wrms

Substage: 6 Fi BTL 18s in a 4th Order Walkthrough on 3 Wolfram 4500s

Electrical: Singer "390" and JY Power

My Official Feedback Thread

Link to comment
Share on other sites

That box is big, tuning is high, and id want more electrical.

I would also want more reserve. Add 2 more Group 31s.

The general idea and choice in equipment sounds fierce though.

Where did you decide to run the cubic feet that you listed?

Edited by CleanSierra

Im not the one you want to try to troll. Just a fyi for you.

Link to comment
Share on other sites

Tune lower round 32hz I would add 2 more d3100s

How many runs of 1/0 do you have to the back?

On 3/28/2014 at 4:22 PM, KyLar96 said:

Its all about the music anyway..... Do a proper install, something your happy with, Fuck everyone else...... improve in time, where you can..... its not rocket science...

Tiburon build //www.stevemeadedesigns.com/board/topic/174059-97-hyundai-tiburon-build-from-ramming-to-slamming-slow-5k-build/

2000 Mountaineer build http://www.stevemeadedesigns.com/board/topic/186736-2000-mountaineer-build-from-ramming-to-slamming-part-iislow-5k-builddc-audio-americanbassxspowersingerarcaudiostingershcavideo-on-pg7/

2000 Mercury Mountaineer: Electrical:Singer 360 hairpin powdercoated white alt, Big 4 double run 1/0 SHCA OFC, 4 runs 1/0 OFC SHCA, limitless 70ah, HU: Pioneer deh80prs interiors: Skar sk85.4 on sb acoustics neo dome tweeters 2 Mmats sq4100s on 4 silver flute 8s(4ohm) SUB Stage: 3 DC5K [email protected] on 6 ascendant audio mayhem 12s d1.4s fully loaded

Link to comment
Share on other sites

Three 3100's and two 4800's wouldn't that kinda be much for one NS-1?

How many runs of 1/0 do y'all suggest?

2009 Chevy 2500HD Crew Cab

Current Set up -

Headunit - JVC 6100BT

Mids/Highs - Sundown SA-6.5 CS x2

- 4 Crescendo pwx6.5's

- 2 Crescendo ft1's

Mids/Highs amps - 2 Sundown SAX100.4 V2

Sub amp - NS-1 V2

Alts - 2 Singer 320a 6 Phase

2 XS D4800 under the hood

2 XS D3100's in back

2 Sundown Team 18's walled

Link to comment
Share on other sites

Do you like holding voltage? If so, then 3 Group 31s is not top much at all. That amp is a beast, and it's going to suck voltage. I'd do 2 runs of 1/0 OFC. Each line should be good for around 350A depending on length.

Edited by CleanSierra

Im not the one you want to try to troll. Just a fyi for you.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   1 Member, 0 Anonymous, 1414 Guests (See full list)

×
×
  • Create New...