randyman78596 Posted May 10, 2014 Report Share Posted May 10, 2014 i have come upon a problem and im wondering if the coding for torres box calculator has been updated or something, there is differences between box specs..im using torres 2010 and 2011 v 1.1 , which version is correct?? here is some screenshots of the differences http://imgur.com/1NMLBjI there is version 2010 http://imgur.com/D1O3Sse and there is version 2011 v 1.1 Link to comment Share on other sites More sharing options...
Joe X Posted May 10, 2014 Report Share Posted May 10, 2014 i have come upon a problem and im wondering if the coding for torres box calculator has been updated or something, there is differences between box specs..im using torres 2010 and 2011 v 1.1 , which version is correct?? here is some screenshots of the differences http://imgur.com/1NMLBjI there is version 2010 http://imgur.com/D1O3Sse and there is version 2011 v 1.1 There's two versions so of course it has been updated, both versions are slightly off, you can review all the issues that have been found on Torres thread, to summarize I can tell you that there are two major flaws: 1) port displacement is miscalculated, it results normally in 0-2 Hz off the correct calculations, exceptionally 3 Hz off. 2) tuning is miscalculated when using multiple round ports, with a single one it works just fine. A number of other small glitches have been found that are not really important IMO. Some users in specific machines have experienced major calculation issues but I know of no more that 5 people to my knowledge have experienced this (I was one of them in an older machine but running the software in a VM corrected the problem). Link to comment Share on other sites More sharing options...
randyman78596 Posted May 10, 2014 Author Report Share Posted May 10, 2014 ok kool, i have a couple questions for you then 1. would you go with the calculations for the threatcon2 15" that i came up with using 2011 v 1.1 ? 2. would you be able to come up with accurate box specs for the sub?, i'd like to keep around 3.75 cu ft net, 33-35 hz tuning and 16-18 sq in port area per foot. im gonna go 3 common slot port Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.