Polaris RZR-4 900 Turbo - Sound system and Mods - Update: New Seats!! Rockford Fosgate I-Beam Bracket Fabbed Pg. 30

[meade916]

Most quality speakers are marine grade by their very nature. Just means that their fronts are water resistant for the most part. Most automotive speakers in doors will see more water (on the backs) than any boat speaker.

Considering he won't be driving underwater, there is no real concern. The fronts will be fine, and the back won't really get wet

plus i have a roof on it.......plus i just ordered my doors...plus i just ordered a 2 piece windshield .

[GorillaFIngeRs]

Sounds like you might be able to trap some of that bass in after all

Just need a trunk now haha

Edited May 25, 2014 by GorillaFIngeRs

[rfbasshead]

How do you clean the inside?

[meade916]

How do you clean the inside?

I have been blowing the dust and dirt out with an air hose and or blower.....and then spraying the floors, wiping the seats. I just got my doors on so they will get even less dirty now

[meade916]

Todays updates:

I am waiting on my "Side Slider" kit to come from Soundman and this is where i plan on putting my Ipad Mini. Rode hard all weekend and it kicks ass right here! Here is some pics from the ride and then some pics of the box i started.

Chicken has about 10 ATV/UTV's all over the place...he just got the 1000 2 seater

No lie, we are smasing through the woods and boom, we pop out into a clearing. The worlds sickest personal horseshoe pit. Beat, Bear, whatever else you want - it's there. This place rules.

Ren from Doja Clik chillen havin' a cold brew.

Look how dirty i am....it's what happens when you ride BEHIND someone. I got my windshield coming this week and that won't be a problem anymore LOL

Took a ride through more woods and ended up at Uncle Bud and Aunt Diane's pad. Shot some pool. Took some cash.

[meade916]

What it's like to be on the Hill. It's way legit. There's a ride or a seat for everyone when we smash out to the hills.

The Drophead Rolls and Ferrari just hanging out.

Dirty, like my car...chea!

A bunch of sick ass Harley's and Indian's

Honored to see this on his wall when i visit. Sick ass picture of the Hoopty.

After a long night - time to off load and get a shower and some sleep!

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

Fast forward to Tuesday:

Ok here we go with the box. The plan is a 3 chamber, 6th order bandpass. 3, 3" Ports in the center chamber (subject to change after i determine exact final box volume) and a single 4" port in each of the side chambers. It has a nice response curve, i hope it sounds as good as it looks on paper. Ill share more details on the box once i know it sounds right. I plan on porting UNDER the railing and right behind each seat on the 4" ports and in between the seats on the 3" ports. Im doing all i can to get bass in an open air environment while protecting the subs (with the BP design). I need every single square inch of volume i can get so i am not using aeroports. I am using ABS tubes with a nice clean round over on the outside.

**NOTE: Due to the crazy shapes this bed is made of, some of my work looks rough. I had to make some changes along the way and a LOT of this is freestyle off the top of my head (with the exception of box volume). I am planning on making the top part a usable bed to hold items. I plan on glassing it to where it comes down the sides at an angle and looks natural. I will still be able to use my tie downs too! Also, this box will be EASILY removable for access to the hatch below (for engine work).

When it's done it will be a combo of bed liner for durability and whatever else i come up with to make it look good.

Now for the pics.

I ended up cutting these a lot shorter then this.

[meade916]

So i worked all day and then my doors showed up. HMMMMM, go home or put them on? Yup, i couldn't help myself. I got PRP Doors, they are amazingly sick!!! The latches are incredible...smooth as butter. Took me 2 hours 15 min to put on. 2 Hours to do the driver side, 15 minutes to do the passenger side. No thanks to the worlds shittiest instructions. LOL. But the quality of this product is great so i quickly got over it!

[meade916]

As if building a 3 chamber 6th order bandpass in a crazy shaped box isn't a pain in the ass enough, you have to remember, being a BP box you have to make an access panel. So now i have to make part of this removable....uhhhgggg. Maybe ill put a plexi window here. Time to frame it out.

Also, the side walls of the bed will be taped over and then glassed in so i can take advantage of every little bit of air space i can. You will see. Tomorrow is glass day!

Even though it is just a 10 degree difference, it's still so much nicer if you actually make the cut.

Again, the back sides of each of the side chambers (where you see the ABS plastic) this will be taped off and then glassed in. That's tomorrow.

Those ports arent going in THAT exact spot...i know it's too high. I was just doodling and checking for space when i drew those on. They will be dropped about 3-4" down from what you see here.

I know it's UGLY but let me get my shit handled, it will look good once i get to the "make it look good" stage. Most of this is freestyle so it's just me experimenting and doing what i can to make it happen.

The ports should be nice and loud coming up under this bar. I am going to seal it off too it so hopefully it will help channel that bass into the vehicle some.

[n8ball2013]

Every time you post pictures from chickens I end up haying myself. How long before he wants bump in his?

[RossGo]

Every time you post pictures from chickens I end up haying myself. How long before he wants bump in his?

My exact thoughts