Polaris RZR-4 900 Turbo - Sound system and Mods - Update: New Seats!! Rockford Fosgate I-Beam Bracket Fabbed Pg. 30

[meade916]

AToday, after building the bus bars for the DGAF Tercel project, i was ready to head home. I grabbed a drink of water and looked to the left at the new RZR i just bought 3 days ago..... and to the right at the new System of the Month prize that just came in (Rockford Fosgate T400.4ad and RFT500.1br). I couldn't help it!! i decided to snatch them up. Don't worry, I already have the exact same stuff on the way and hopefully should be here by Monday

Anyway, these things have such a small foot print i couldn't resist just "seeing" where i could put them...well seeing turned into doing.

I plan on one set of RF T3's in the kick panels and 2 Rockford P2 10's in a bandpass box aiming forward. I realize it won't slam super hard being outside but it should slam hard enough AND sound good. I plan on making the box somehow part of the back so i still have some sort of bed. Like the box will drop into the bed and still look like there is a bed. I will probably bedline it. Also, before you ask, the placement on the amps that i chose has a chance to be exposed to the elements. I am getting the roof soon, so the sun won't bake on them. I will end up making a cover for days when i have to hose out the inside. I fully understand the amps might get dirt or a little mud on them over the years. Not worried about it. I should have it all playing by tomorrow with the exception of the box being done or the kick pods being built. I will run all the wires and have it all prepped for the box, woofers and mids/highs. More pics to come of course! Here it is so far.


the plan:

1 Apple Ipad Mini (future)

1 Rockford Fosgate 3sixty.3 Processor (with bluetooth)

1 Rockford Fosgate T500.1br (powering the subs)

1 Rockford Fosgate T400.4ad (powering mids/tweets)

1 Set Rockford Fosgate T3 Separates (future, subject to change).

2 Rockford Fosgate Punch P2 10" Subwoofers (future, subject to change).

SMD D'Amore Engineering RCA Cables

SMD TM-1 Temperature Monitor

SMD VM-1 Volt Meter

SMD OM-1 Output Meter

1 XS Power D925 AGM Battery

2 XS Power D975 AGM Batteries

Sky High Fusing

Custom Amp Cover with built in fans (future, subject to change)

[meade916]

[thefourth]

Hella clean. Those amps are dope too! Great prizes for SOTM!

[meade916]

there is a nice spot under the passenger seat but i didn't like the thought of the amps down there.....i wanted them up off of the floor because if anything is going to get wet it's that.

[hdorre]

Ohh shit.. I like where this is going Mr. Meade.

The fact that you're active processing a setup in an ATV puts a smile to my face. This once again proves that the benefits aren't only apparent in a purely SQ oriented setup

Once again, another build ill be following..

[Aidan Hansen]

You know if you're going to go with 1 OM-1 you have to go two of them due to mids and highs needing one with the one for the bass.

[oldsoundguy]

put the amps on the dyno so we can see what kind of power they make....

[SMZ2]

I knew you were going to put something in the RZR just wasn't sure when lol.

As always the placement and installation looks super clean. Jeez those amps are tiny.

[evermaxx]

Thats sickkk!

[meade916]

put the amps on the dyno so we can see what kind of power they make....

nahh no time for that.

every Rockford amp i ever tested exceeded it's ratings so i am not sweating it.