T40001BD Stuck in protection and buzzing from inside amp HELP! Video inside!

[Tommy_PGT]

[BoomZoom808]

Looks like your problem is you got your power wire mixed up with your speaker wire?

[hispls]

I sincerely hope that's just a test bench because if that was your power and ground installed you should be publicly flogged.

Also AFAIK you must send that in to RF for a re-board. A lot of shops won't work on them because there's some hard to find parts and there's a lot of them that need replacing when they self destruct.

If your amp doesn't come out of protect mode after you power it off and on it's toast, there's not like some user servicable parts inside or anything.

[hazestorm23]

Is that 8 gauge wire? And did it do this in the car or you just got the amp?

[SIDE SHOW]

sounds nasty, also what electrical are you using to test it?

[SIDE SHOW]

sounds nasty, also what electrical are you using to test it?

[Tommy_PGT]

I got the amp like this and I have it hooked up to a trip lite 40 14.0 volts at 60 amps hooked to kinetic battey i was just trying to get it to power up. It would do the same in a car

[Tommy_PGT]

So I need to send it in to rf? If you had to take an educated guess what went wrong?

[Miguels]

i always wanted one of those amps

[Smoove]

Please contact freemans car stereo at 704-398-2206 for repair options

that is from RF's repair info. I think the company is in NC