Jump to content

Amp Test Tuesday - MTX 1501D (Plus AMP GUTS) (GUESS the Wattage! WIN STUFF!) RESULTS PAGE 7! *video


Recommended Posts

A few weeks back, someone stopped by while i was busy working on the RZR and asked if i could take a look at his MTX 1501D amp. He said it wasn't working. I told him i am in no way shape or form an amplifier repair man. I can do basic stuff, always have. But anything beyond basic, he might as well just call MTX. He said the speaker terminals were loose and it kept cutting out. Well that, to me says "cold solder".....and "cold solder" is something i can obviously fix :D. So i said "what the hell" and told him to toss it on the bench. When i finished with the RZR i would take it apart and see what i can do. After a few weeks, i finally cracked it open. Sure enough, the solder joints on the speaker outputs were very loose. I resoldered them and everything was back in business. Instead of just handing it back, i decided to test it for him to make sure it was working. Hence...the new Amp Test Tuesday.

First of all...just an FYI before i start. I have a very limited power supply on my test bench, I have 3 12v batteries, 3 14v batteries and 3 16v batteries. A lot of companies rate amplifiers @ 14.4-14.5vdc, basically the type of power you would expect when the vehicle is running and the alternator is turning. For that reason, i decided just to use the 14v bank. If a company stresses 12v ratings in the book, i normally will do those as well. But this amp is a random amp that came in and i don't know much about it. 14v bank it is. That consists of 3 XS Power D1400 Batteries sitting on a XS Power HF1415 (15a) Intellicharger. It is in no way shape or form a "power supply" although when you look at the tests you might see the SURFACE charge above 15v. That is quickly used up when the test starts and is brought back down to low 14v range. It is not a perfect test due to my power supply issues. BUT, i think 3 small 14v batteries on a small 15a charger with a 1500watt rated amp pulling on it isn't TOO far off what you would see in real life.

You guys know how i do this....

Who wants to play a game? I did 3 tests. Guess the TOTAL number combined (add all 3 together) to come up with one large number for your guess. If someone gets the EXACT number, i will send them $50 plus an SMD Shirt AND SMD Hat. If NOBODY gets it, i will give the closest person who did NOT BUST an SMD Shirt of his/her choice.

Add All of these below and post your final number! Tomorrow, 7/8/14, At 6pm Pacific time i will upload the Youtube video with results.

Check my channel @ http://www.youtube.com/meade916

1. Certified Mode (test stops @ 1% Distortion) @ 1 ohm (X,XXX watts)

2. Non Certified Mode (test stops at Clipping) @ 1 ohm (X,XXX watts)

3. Dynamic RMS Burst Mode (Test stops @ clipping) @ 1 ohm) (X,XXX watts)

Here are the specs i found online.

Thunder Elite Series 1-Channel Class D Car Amplifier

RMS Power Rating:

4 ohms: 500 watts x 1 chan.

2 ohms: 1000 watts x 1 chan.

1 ohm: 1500 watts x 1 chan.

Max power output: 3000 watts x 1 chan.

Semi Unregulated MOSFET

LED thermal and short indicators

Pure N-channel design

Single channel operation

Overload and thermal protection

Prizm EFX With Demo Mode

Self adjusting, turbo-charged intercooler that intelligently supplies cool air evenly and constantly over all devices based on the amplifier's demand

Variable low-pass filter (40-200 Hz, 24 dB/octave)

CEA-2006 compliant amplifier

Dimensions: 20-11/16" L x 9-5/8" W x 2-1/2" H

Here is some pics.

Good luck!

Image5_zps00ffffaa.jpg

Image6_zps6fb46b52.jpg

Image8_zpsf48c9112.jpg

Image7_zps7805d51a.jpg

IMG_3509_zpsc73e316c.jpg

IMG_3510_zps83e1fee6.jpg

IMG_3511_zpsb958fa81.jpg

IMG_3512_zps219a8791.jpg

IMG_3513_zps4cdb0f6e.jpg

IMG_3514_zps096a45ca.jpg

IMG_3515_zps9f83919c.jpg

IMG_3516_zps4a7cf41b.jpg

IMG_3519_zps8022ba34.jpg

  • Like (+1 Rep) 2


All SMD products + MORE available at my store here! https://wccaraudio.com/ 
wc2022-red-black-whitebg_1667625898__08138.original.png.02e514af82dce531edf1aa4a36851c60.png

Subscribe to My Youtube Channel! Over 1,000,000 subscribers strong! Turn on your notifications!
http://www.youtube.com/meade916

 

Follow My Instagram! Daily live feeds from the shop, exclusive content way before it hits my Youtube channel...and little squares with photo's in them :D
http://www.instagram.com/meade916

The Official SMD Facebook fan Page
https://www.facebook.com/SteveMeadeDesigns/

Follow my Tweet (Twitter)
http://www.Twitter.com/meade916
 

 

 

Link to comment
Share on other sites

oh, no need to say it i know...but for those that are new, you can find info on the SMD AD-1 Amp dyno (and more) @ http://www.wcCarAudio.com or http://www.damoreengineering.com

This is fun, i love doing this...so lets see some guesses :D

  • Like (+1 Rep) 2


All SMD products + MORE available at my store here! https://wccaraudio.com/ 
wc2022-red-black-whitebg_1667625898__08138.original.png.02e514af82dce531edf1aa4a36851c60.png

Subscribe to My Youtube Channel! Over 1,000,000 subscribers strong! Turn on your notifications!
http://www.youtube.com/meade916

 

Follow My Instagram! Daily live feeds from the shop, exclusive content way before it hits my Youtube channel...and little squares with photo's in them :D
http://www.instagram.com/meade916

The Official SMD Facebook fan Page
https://www.facebook.com/SteveMeadeDesigns/

Follow my Tweet (Twitter)
http://www.Twitter.com/meade916
 

 

 

Link to comment
Share on other sites

It's great to see amp test Tuesday again!! I say 4135 total.

2001 Saturn L200
-Sony MEX-BT4100P
FRONT STAGE:
- (4) Crescendo PWX 6
- Cadence XA250.2
SUB STAGE:
-Fi Audio BL 15 (Sealed Off)
-Crescendo BC2k
ELECTRICAL:
- Singer 240A alt

- XS Power D3400
- SkyHigh OFC power/speaker wire
- Big 3 with SkyHigh 0gauge
Build Log: Click Here

Scores: 146.5db @ 29hz Outlaw

Link to comment
Share on other sites

That heat sink in the middle with the fans on it looks pretty slick. Different look than screwing all the mosfets to the amp case for passive cooling

As far as wattage... Going to guess 4433w combined :)

Link to comment
Share on other sites

Is this amp even i ohm stable? Im only finding 2 and 4 ohm ratings.

Just want to be sure 1 ohm tests will work before I guess.

i don't know much about the amp, just figured it was 1ohm stable. This is the first link i pulled up and it looks like it is

http://www.sonicelectronix.com/item_8653_MTX-Thunder-Elite-1501D-TE1501D.html

either way, i did the test @ 1ohm lol - so it is what it is :D

  • Like (+1 Rep) 1


All SMD products + MORE available at my store here! https://wccaraudio.com/ 
wc2022-red-black-whitebg_1667625898__08138.original.png.02e514af82dce531edf1aa4a36851c60.png

Subscribe to My Youtube Channel! Over 1,000,000 subscribers strong! Turn on your notifications!
http://www.youtube.com/meade916

 

Follow My Instagram! Daily live feeds from the shop, exclusive content way before it hits my Youtube channel...and little squares with photo's in them :D
http://www.instagram.com/meade916

The Official SMD Facebook fan Page
https://www.facebook.com/SteveMeadeDesigns/

Follow my Tweet (Twitter)
http://www.Twitter.com/meade916
 

 

 

Link to comment
Share on other sites

4322 Watts

XS Power D5100, 2 D2700s, & 2 D975s

MechMan 220a Alt

DC 5K

Kicker 650.4

2 12 Ascendant Audio Mayhem's

Pioneer DEH-P7200HD

Rockford Fosgate 3sity.1

Build log: http://www.stevemeadedesigns.com/board/topic/166792-88-nissan-maxima-trunk-build/#entry2430899

http://www.stevemeadedesigns.com/board/topic/191439-lexus-is300-fi-crescendo-shca-rf-pics/

Link to comment
Share on other sites

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 235 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...