aculous Posted August 22, 2014 Report Share Posted August 22, 2014 Update 2/3/2015: Going in a new direction, bought a Orion XTR 475 and got the old school bug, going to try and piece together some more to make it a more old school build or just run old school power. Still need to get the sound deadner/carpet rear panel situation worked out. Also I am going to start pulling panels to see how much room I have to work with. Setup will be as follows: HU: Alpine 9887 (En Route from Canadia)Tweeters: Front: SB Acoustics SB26ADC-C000-4 http://www.madisound...m-dome-tweeter/Rear: Vifa XT25TG30-04http://www.parts-express.com/tymphan...eter--264-1016Mid-Midbass: Beyma 8P300Fehttp://www.usspeaker...a 8p300fe-1.htmRear Midbass: Silver Flute W20RC38-04 http://www.madisound...hm-8-wool-cone/Sub: (2) American Bass XD844 8"http://www.americanbassusa.com/produ...product_id/126Subs will be in a Bill Fitzmaurice Autotuba eventually. First its going in a ported enclosure. I am going to try a couple designs. I also have a Stereo Integrity 15" I may play around with. I just bought bassbox pro and crossover pro so I thought I would actually use it. Front Mids 4channel: Orion XTR 475http://www.stevemead...-orion-xtr-475/Rear Mids/ Front highs 4 channel: Cadence Xenith XAH 125.4 (have on hand)http://www.wooferset...ier-orange.aspxSub Amp: Rockford Fosgate Prime R1200-1Dhttp://www.rockfordf...etails/r1200-1dSound Deadening: RAAMMAT, DB3 MLV, JUTE thermal insulation (denim based)Knukonceptz 1/0 gauge amp kit and big 3, 4 gauge amp kit and a stock 160amp alt(130a at idle). Stock battery.SMD DD1 and CC1 for tuning. Link to comment Share on other sites More sharing options...
aculous Posted August 22, 2014 Author Report Share Posted August 22, 2014 Dats da ho. 2008 Dodge Magnum police car. Clean....cuz thats the first day I got it. Stage 3 trans in it and a 3200 stall...diablosport but haven't ran it yet. Taking it to the track later on next month. Link to comment Share on other sites More sharing options...
exxd Posted August 22, 2014 Report Share Posted August 22, 2014 Looks like this is gonna sound superb. What's the power handling of that line of subs? Link to comment Share on other sites More sharing options...
aculous Posted August 22, 2014 Author Report Share Posted August 22, 2014 Looks like this is gonna sound superb. What's the power handling of that line of subs? 600rms, but they are pretty efficient so it should be interesting. build quality looks good. Link to comment Share on other sites More sharing options...
OrionStang Posted August 22, 2014 Report Share Posted August 22, 2014 Curious how you are going to wire up tweets, mids, midbass, and subs on a 4 channel and a mono. SMD Super Seller My Feedback Thread Link to comment Share on other sites More sharing options...
aculous Posted August 22, 2014 Author Report Share Posted August 22, 2014 Curious how you are going to wire up tweets, mids, midbass, and subs on a 4 channel and a mono. Alright so I lied a little. So Midbass and tweets are going to be on the 4ch. Mids I am going to run off the headunit. They are 20watts rms anyway so I figure 17 or so will be sufficient. Link to comment Share on other sites More sharing options...
aculous Posted August 27, 2014 Author Report Share Posted August 27, 2014 Alright so have the drivers are in. Still looking at sub amps. Found out the SI Sub is a dual 4ohm instead of the dual 2ohm I ordered. So looks like I am going to have to run a more expensive amp. But I figure a 2ohm load is going to be easier on the amp anyway and less likelihood of issues in the future. (Never ran a sub at 1ohm....so theres that. Wish the amp was significantly more expensive....would give me an excuse to run 2 15s Talked to Soundqubed and DC Audio about amps. Looks at the droppinhz site too. Link to comment Share on other sites More sharing options...
Wood Posted August 27, 2014 Report Share Posted August 27, 2014 1 ohm isn't bad... it's below 1 ohm that you should be concerned... 2011 Nissan Altima aka Red Ruby HEADUNIT: Pioneer AVH X2700BS ELECTRICAL: -Singer 230a -Northstar gr34 -(2) Northstar SMS220 w/ Custom Terminals from 12V Metalworkz -100% Welding Cable FRONT STAGE:-(2 Sets) Hertz HSK165 -Hertz HSK130 -Ampere Audio 125.4 SUB STAGE: -(3) Sundown Audio SA REV2 12's -Ampere Audio 3800.1 V2 MISC (NON AUDIO RELATED): -Interior & Exterior Lights LED -Gloss Black Roof (PAINTED) -15% Front, 5% Rear Tint -Roof Spoiler -20" TSW Snettertons (20x8.5 front, 20x10 rear) -Custom Projector Retrofit (FX-R 3.0, 6.5k HID, Morimoto Mini H1 (faux projector), Quad Starry Night Halos) ----- COMING SOON!! -Aftermarket Fog Lights -Custom Painted Engine Covers My Build Log: http://www.stevemeadedesigns.com/board/topic/169869-woods-2011-altima-aka-red-ruby-new-video-more-updates/page-109 Retrofit Build Log: http://www.stevemeadedesigns.com/board/topic/185787-hid-projector-retrofitting-diy-by-wood/#entry2765346 Link to comment Share on other sites More sharing options...
TheycallmeJT Posted August 27, 2014 Report Share Posted August 27, 2014 sic magnum! great equipment as well Link to comment Share on other sites More sharing options...
ToNasty Posted August 27, 2014 Report Share Posted August 27, 2014 youe going to use the amp for midbass and tweets and the hu for the mids? why? ***Super Sellers List***http://www.stevemeadedesigns.com/board/topic/25829-super-sellers-buyers Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.