Jump to content
sundownz

SA-8 v.3 In Development : Getting Close !

Recommended Posts

Got my first prototypes in for the v.3 revision of the SA-8 -- it took quite a bit of consideration to figure out how to make some improvements to the design but I think we are on the right track :

IMAG1176.jpg

* Newly tooled surround with an improved shape / slightly bigger overall size... this is a new shape I have been testing with for a while that is a bit more linear than the old shape. It allows a small but noticeable amount of extra throw.

IMAG1177.jpg

* We removed the vent ring to reduce the total depth by 10mm -- since this reduces the cooling capability a bit we added gap vents (next photo). I did use appropriately sized drilled vent holes to maintain a degree of pressure in the under-spider cavity to help push air to the gap vents and keep velocity high. I tweaked and tuned the vent hole size on the SD-2 8" model already.

* A second but major benefit is this will help improve QC pass rates by reduced spider to top plate distance; thus reducing the chance for coil tick (fewer yard sale units thus steadier inventory).

* The magnet stack increased to 50mm from 40mm -- and we reduced the back plate from 25mm to 15mm (removed the 10mm bump) to keep overall motor depth the same. A marginal increase in BL will be seen.

* New magnet boot isn't tooled yet but will be for production.

IMAG1178.jpg

* It's a tight fit in this motor due to the thick shorting ring... to get the surface area I wanted I used 16 gap vents @ 2.5mm each as wider vents wouldn't fit between the pole and shorting ring. Also each vent is flared to keep the flow quieter.

----------

There are a few other tweaks to the way the suspension goes together, standard XL leads, and a few other little tricks in the motor that you cannot see -- all in all should be a nice little upgrade to the SA-8 driver.

I still need to tweak the stiffness a bit as it ended up a bit too stiff on the first two prototypes... so that is still under-way. I expect them to come out some time around the end of the 1st quarter next year (so end of March or so). Until then the v.2 will be in full stock and shipping as normal.

  • Like 5

Share this post


Link to post
Share on other sites

Woops... brain fart it's actually only 5mm total shallower -- too many protos on the mind! Still a small reduction :)

Took a photo side by side to show the surround difference too:

IMAG1181.jpg

IMAG1182.jpg

  • Like 1

Share this post


Link to post
Share on other sites

Curious how many of these little improvements are destined for the rest of the SA line. So far, I love my SA12, and I'll likely be a Sundown convert after running one.

  • Like 1

Share this post


Link to post
Share on other sites

Sundown is truly an amazing company. Steady coming out with new products and yet never stop improving the current products. This is why I'm a steady sundown product owner. Nice work jacob its the little things that count.

  • Like 1

Share this post


Link to post
Share on other sites

I run a Sundown SD-8 in my regular cab Ford Ranger and it is mind blowing what these guys put into a sub. In a .3cube box I get as much bass as I want, and I'm only feeding it 140ish watts from an old RF Punch 40xi. These SA's put out even better than my SD (though not in the tight spaces). Hearing a pair of these getting 300-400 watts each will astound you. 8's should NOT sound like this. Yet they do. I don't care how much more $$ they are than regular 8's, they're worth every extra penny and then some.

  • Like 1

Share this post


Link to post
Share on other sites

Got a weird double post so I'm editing this one.

One of the other things I love about Sundown is just how incredible they are across their whole line. They don't phone it in or cut corners anywhere. Even entry level stuff is built to run long and hard. And they eat up power all day long. Every rating is short of capacity. Under promise and over deliver.

Edited by mrclm
  • Like 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now