Jump to content
Second Skin Audio

need help with box design dual hds212s


basscherokee

Recommended Posts

building a box for my 2 hds212's and the site recommends 4-5 cubic feet for 2 12s. to my understanding this is net before port and woofer displacement? and for tuning it do i use the gross box volume for the port area or do i use the net? if anyone has any ideas my max dimensions a 36wx18hx20d if maybe someone could chime. im using torres and winisd for frequency response.

plus what is a good tuning to stick around for the hds200s? from what i read they like 33-38 but does anyone have any experience with these?

2001 vw gti

2 hds212s

4.75 net tuned to 34hz

audioque1200 wired to 1 ohm

nvx 0 gauge to the back

kinetic khc 2000

kenwood deck

Link to comment
Share on other sites

Net volume is what you have left after you subtract port and woofer displacement. This is the number they are referring to and it is also the number you use to calculate tuning.

I don't have experience with those SoundQubed subs but most folks say they like a little higher tuning, so like 35-36ish.

"Nothing prevents people from knowing the truth more than the belief they already know it."
"Making bass is easy, making music is the hard part."

Builds:

U7qkMTL.jpg  LgPgE9w.jpg  Od2G3u1.jpg  xMyLoO1.jpg  9pAlXUK.jpg

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   1 Member, 0 Anonymous, 333 Guests (See full list)

×
×
  • Create New...